Frequent BSoD

All these installs, were they clean, new installs?

I see a Satellite driver which I know to have caused problems before, even though you seem to have the right version (NCREMOTEPCI.sys). Do you use it? Would a test de-install be ok to try?

Some of your ATI drivers are old and need to be updated. A specific example is

atinavrr.sys Thu May 15 03:16:11 2008

You can get a 2009 version here: AMD.com | Support & Downloads

I see multiple crashes that point to standard Windows graphics related drivers.
Reasons could be: HW/BIOS failure, Windows Update incomplete/interrupted or third party Graphics drivers failing.

It would probably be a good idea anyway to check updates for Windows:

Please go to your Maintenance Center and check the Windows Update status. Make sure you are up to date, do them one by one manually if needed.
For help or reset see: Windows Update - Reset

And please goto the manufacturer site of your graphical card and download newest there.

The " dxgmm.sys" could be one of the ATIxxxxxx.sys drivers that are part of the Graphical card suite. Can you upload that latest dump?

Also could you please fill in all system spec's so we can help identify cards and corresponding drivers?

Have you only downloaded and updated the newer AMD stuff or did you fully de-install the old first?
Sometimes these old drivers are not removed correctly by the normal de-install software from the manufaturer.

To be sure you might want to de-install again and then use Driversweeper to finish it. Reboot (you'll have a simple screen as if in Safe mode as you are now defaulting into standard W7 drivers) and install newest.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Driver Sweeper

Driver Sweeper is a fast tool to remove driver leftovers from your system. It's very important to remove your drivers on a proper way, because driver leftovers can cause problems like stability and startup problems. You can use it if you want to update/remove drivers from your system.

How to use ?

There are two methods to use Driver Sweeper.
Both methods achieve the same results. This method is always able to clean all files.

This method will delete remaining files upon reboot (if deleting failed). You can clean your drivers this way:

- Use the official uninstaller(s) of the driver(s) you want to uninstall.
- Reboot your PC in Safe Mode.
- Run Driver Sweeper and select what to clean.
- Analyse lists all the entries possible to remove, cleaning removes the entries selected.
- More drivers can be selected for the same cleaning process.

What can it be used for ?
The current supported drivers are NVIDIA (Display and Chipset), ATI (Display), Creative (Sound) Realtek (Sound), Ageia (PhysX) and Microsoft (Mouse).

Phyxion.net - Driver Sweeper
When it is removed then download and install the fresh copy, from the manufacturers' site if possible.

System specs:
GPU: Nvidia GeForce GTx260
CPU: Intel Core2 Quad 2.33ghz
Gigabyte EP45-DS3R motherboard

I have a TV Tuner card, an ATI TV Wonder Pro 650 PCI, that I don't use and I keep meaning to take out. I'll do that now, and use Driver Sweeper to take off some drivers and reinstall them clean.

Thanks for the help guys.

EDIT: I took out the ATI card, and it confused the hell out of my computer. When I booted up again, Aero was disabled and I got a couple messages saying Windows Device Manager had stopped working. Then it blue screened. The next time Aero was working again, but it had reset my background and it wasn't long before it restarted again. So I booted into safe mode and removed the AMD and NVidia drivers with driver sweeper, and things seem back to normal. We'll see if it's stable or not yet.

Aaahhh I should have asked more questions... was wondering why you seemed to have "double drivers". Very good. This could well be it!

Multiple codes here, difficult to pinpoint. One is clear though... A usb device driver:

HTML Code:

SYMBOL_STACK_INDEX:  7

SYMBOL_NAME:  USBPORT!USBPORT_TxCsqFindIrp+a1

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: USBPORT

IMAGE_NAME:  USBPORT.SYS

DEBUG_FLR_IMAGE_TIMESTAMP:  4d8c0c08

FAILURE_BUCKET_ID:  X64_0x1E_0_USBPORT!USBPORT_TxCsqFindIrp+a1

BUCKET_ID:  X64_0x1E_0_USBPORT!USBPORT_TxCsqFindIrp+a1

Followup: MachineOwner
---------

Please check Devices for any USB ports that might have a problem...

Just to be sure... you not OC-ing?

The mix of codes on the rest point to either drivers or hHW. We'd normally check memory for that first:

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

Post back any results please...