Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD (hypersync flood transport error)

16 Aug 2011   #1
mapacible

Windows 7 Home 32 bit
 
 
BSOD (hypersync flood transport error)

My PC would often reboot when I am playing processor and graphics intensive games. After re-boot a message "Hypersync Flood Transport Error" is displayed.

The computer is with me for over 6 months now and I have encountered this over the past few months already but only on intensive games. My pc is not overclocked.

I've attached the necessary zip file.

Here are basic details of my pc:
AMD Phenom II X4 955BE
Kingston 2GB PC1333 DDR3
MSI 880GM-E45 Motherboard
Windows 7 Home 32bit

I hope someone out here can help me


My System SpecsSystem Spec
.

16 Aug 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by mapacible View Post
My PC would often reboot when I am playing processor and graphics intensive games. After re-boot a message "Hypersync Flood Transport Error" is displayed.

The computer is with me for over 6 months now and I have encountered this over the past few months already but only on intensive games. My pc is not overclocked.

I've attached the necessary zip file.

Here are basic details of my pc:
AMD Phenom II X4 955BE
Kingston 2GB PC1333 DDR3
MSI 880GM-E45 Motherboard
Windows 7 Home 32bit

I hope someone out here can help me
These were likely caused by a component of SystemRequirementsLabs CanYouRunIt. I would remove it.
My System SpecsSystem Spec
16 Aug 2011   #3
mapacible

Windows 7 Home 32 bit
 
 

Hi zigzag,

Indeed the latest blue screen was caused by me trying to install what you mentioned in order to update my driver. But if you'd look at the previous blue screens, they are mostly related to hal.dll and ntoskrnl.exe. I wish to know if it is really a hardware issue and is it possible to be able to identify the specific component that's causing the problem?
My System SpecsSystem Spec
.


18 Aug 2011   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by mapacible View Post
Hi zigzag,

Indeed the latest blue screen was caused by me trying to install what you mentioned in order to update my driver. But if you'd look at the previous blue screens, they are mostly related to hal.dll and ntoskrnl.exe. I wish to know if it is really a hardware issue and is it possible to be able to identify the specific component that's causing the problem?
They only reference hal.dll, and ntoskrnl.exe because you are using something like Bluescreenview to read them. Often BSV and who crashed blame the OS when they cant find the true cause.
My System SpecsSystem Spec
18 Aug 2012   #5
DoubleChurn

Windows 8 64bit
 
 

Hi,

I just want to add my two cents:
I had the same problem, was playing GTA IV and after about 10-30 minutes my video would crash, then a split second after my system would crash and restart. When it restarted a Hypersync Transport Flood error was reported, press F1 to continue.

I tried a lot of what people said out there:
1) Malwarebytes scanning for virus detection (none found)
2) Add extra voltage to my NorthBridge on my MSI870-G45 (did not resolve my problem, and when it reboot it reset the voltage back to it's original)
3) Lower graphics requirements on the card

Nothing worked, I ended up forcing my video card to crank to 100% fan capacity. And GTA IV had ran for about 2 hours. Then I got busy so i closed the game. This may have to do with my video card, may RMA it. I have an HIS IceQ 6870 1GB. My video card temp now idle is 40c and ~55c when running game.

Thanks, hope this helps.
My System SpecsSystem Spec
Reply

 BSOD (hypersync flood transport error)




Thread Tools





Similar help and support threads
Thread Forum
HyperTansport Sync Flood Error (Playing Fallout NV)
Happens at complete random while playing Fallout: New Vegas. The computer will hang for a second, looping the last split second of audio before rebooting, at which point my BIOS tells me there was a "HyperTransport Sync Flood Error". Technically I never see a blue screen at any point, however upon...
BSOD Help and Support
A Hyper Transport sync flood error occured
Ok ive been having this problem for a while now, every once in a while my computer shutsdown and when i reboot it has a Error that said "A hyper Transport syhnc flood error occured" and i start to Windows normally....Ive been having this problem after i installed a new RAM and windows 7....anyone...
General Discussion
event id 7036 flood
good day my windows 7 x64 laptop is logging over 1300 event id 7036 on boot in a span of less than 30 seconds. It encompasses many different services all starting and stopping very rapidly. there used to be less than 100 of these after using the system for a whole day. the computer browser...
Performance & Maintenance
Any theories on how long before HDDs return to pre-flood prices?
I'm afraid I might have a failing hard drive (here are the details: http://www.sevenforums.com/crashes-debugging/210118-bsod-after-pc-wakes-sleep-mode-now-w-clunking-noise-hdd.html ), but I'm not sure if that is the problem. If it is about to fail, I'm wondering how long I might have to wait before...
Chillout Room

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App