Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsods

16 Aug 2011   #1
Upyrs07

Windows 7 Professional x64
 
 
Bsods

Hello windows 7 forums, my pc is once again plagued by the dreaded bsod and I need help please. I have been encountering different random errors ranging from a bad pool header, to a memory management error and a bccode:e1 error. I have no idea on what to do to fix this. They all pop up randomly, so I can't pinpoint what the exact cause is. I am on Windows 7 Proffesional, full retail version, just reinstalled yesterday and my hardware is 9 months old.


My System SpecsSystem Spec
.

16 Aug 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Upyrs07 View Post
Hello windows 7 forums, my pc is once again plagued by the dreaded bsod and I need help please. I have been encountering different random errors ranging from a bad pool header, to a memory management error and a bccode:e1 error. I have no idea on what to do to fix this. They all pop up randomly, so I can't pinpoint what the exact cause is. I am on Windows 7 Proffesional, full retail version, just reinstalled yesterday and my hardware is 9 months old.
Related to yk62x64.sys NDIS6.20 Miniport Driver for Marvell Yukon Ethernet Controller from Marvell. I would re-install the newest available.
My System SpecsSystem Spec
16 Aug 2011   #3
Upyrs07

Windows 7 Professional x64
 
 

Thanks for quick reply. That's strange... I am sure that was one of the first things I have installed. I will try and reinstall right now. One question though, since my motherboard has 2 lan ports, do I have to install the driver on each one separately?
My System SpecsSystem Spec
.


16 Aug 2011   #4
Upyrs07

Windows 7 Professional x64
 
 

Apparently a new bsod error has shown up:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002ED2E7B
BCP3: FFFFF88009369E70
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have uploaded a new attachment for it.
My System SpecsSystem Spec
17 Aug 2011   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Upyrs07 View Post
Apparently a new bsod error has shown up:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002ED2E7B
BCP3: FFFFF88009369E70
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have uploaded a new attachment for it.
This is a common memory exception. Please run the following 2 tests.



1-Memtest.


*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier


Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
Reply

 Bsods




Thread Tools





Similar help and support threads
Thread Forum
Please help me with my BSODs
I experience BSODs every time my laptop is plugged in. But no BSODs happen when I'm not plugged in. Please help me on what I need to do. Here are my laptop's specs: Asus K42jC-vx169 Core i5 M460 2.53GHz 2Gb Ram 320Gb HDD 1gb VRAM (Nvidia GeForce CUDA 310M) Windows 7 ultimate 64-bit
BSOD Help and Support
And Still More BSODs
Sorry in my last post I said I changed CPU when I actually meant Motherboard. After changing my motherboard and running memtest ver. 4.0 I would usually end up with 1 mil errors for every ram in every slot. Same problem happened to my last motherboard which was the same model. Whenever I run...
BSOD Help and Support
BSODs, lots of BSODS
Hi, The blue screen of death are coming with win32k.sys, at first then irql_not_less_or_equal. I have win7 64 bit, clean installed like 1 year or so back. The dell hardware I bought was almost 2 years back but was fully replaced, motherboard, cpu except hardrive 6 months back. It is...
BSOD Help and Support
BSODs every day... need help
Hi guys, i have a serious problem with my new config... i built it 2 weeks ago, and since then i get the BSODs almost every day. i run memtest on both RAMs, individually both were OK, but when tried to run the test on dual, the system crashed after few seconds. checkdisk showed no problems on...
BSOD Help and Support
BSODs in Win 7 pro
Hello, I'm running W7 Pro, and have been having problems with BSODs. I recently purchased a powered usb hub, and on three separate occasions, I received a BSOD error related to the USB. I can't remember exactly what the error was, as the computer's activity log notes the crash, but not the...
BSOD Help and Support
BSODs on win 7 x64
I recently upgraded to win 7 and iv been getting random BSODs. the reason I decided to upgrade was because I started to get some BSODs on vista x64. I have a feeling it could be related to my wireless adapter (ZYXEL G202) drivers. I have attached the latest BSOD minidump files. Could somebody...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App