Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on new system build

20 Aug 2011   #11
ivn

Windows 7 Home Premium 64bit
 
 

I just installed speedfan to check the temps along with prime95.
Now I am a bit confused... in speedfan, the cpu is quite hot, idling around 80-90 C
There is a picture of fire next to the CPU, however the core temps are regular, around 40 C

Now when I start prime95, the CPU temp drops to around 37 C and all the core temps jump up to around 90 C or more...

Seeing 90 C as too high, I stopped the test after a minute.

I'm guessing I've been BSOD'ing because of these temps, but I don't know for sure.


My System SpecsSystem Spec
.
20 Aug 2011   #12
panais

Windows 7 Ultimate 64bit SP1
 
 

For temperatures and more information download and install http://download.piriform.com/spsetup111.exe

The water cooling is always a good idea
My System SpecsSystem Spec
21 Aug 2011   #13
ivn

Windows 7 Home Premium 64bit
 
 

So because my case is too small to support a water cooler, I got higher end fan and heatsink. This was quite hard to find because most heatsinks are huge, and the one I bought barley fits.

So after installing it, I found much better temps and was able to run prime95
I ran prime95 for 12 hours, with no errors whatsoever.

So I ended the test and concluded that the cpu was probably over heating.
But a few hours later, my brother used it to play games, and within an hour it got the same bsod... So what should I do now?
My System SpecsSystem Spec
.

21 Aug 2011   #14
panais

Windows 7 Ultimate 64bit SP1
 
 

Upload the bsod\minidump folder.
My System SpecsSystem Spec
21 Aug 2011   #15
ivn

Windows 7 Home Premium 64bit
 
 

Here it is.

Thanks for your support so far panais
My System SpecsSystem Spec
22 Aug 2011   #16
ivn

Windows 7 Home Premium 64bit
 
 

Here are the minidump files. Sorry it took so long.
My System SpecsSystem Spec
22 Aug 2011   #17
panais

Windows 7 Ultimate 64bit SP1
 
 

Make sure you have NOT overclocked anything!

Uninstall and clean norton from your system ftp://ftp.symantec.com/public/englis...moval_Tool.exe

Download and install mse Virus, Spyware & Malware Protection | Microsoft Security Essentials

Enable windows firewall.

Update your Sonix USB PC Camera driver.

Update your windows using the windows update.
My System SpecsSystem Spec
22 Aug 2011   #18
ivn

Windows 7 Home Premium 64bit
 
 

I don't believe I have anything overclocked... But I'll try changing all settings in bios to default anyway.

I did uninstall norton and installed mse in its place, though I don't think that had anything to do with the BSODs right?

The sonix usb pc camera driver probably came from a webcam I plugged in that installed itself. I'm not sure how to update that.

I had two more BSODs today; they are becoming more frequent it seems...
My System SpecsSystem Spec
22 Aug 2011   #19
panais

Windows 7 Ultimate 64bit SP1
 
 

Uninstall the Sonix USB PC Camera software\driver for testing purpose.

Update your raid drivers.

Update motherboard chipset and bios.

http://www.asus.com/Motherboards/Int..._PRO/#download
My System SpecsSystem Spec
22 Aug 2011   #20
ivn

Windows 7 Home Premium 64bit
 
 

I will get on that.
However, the chipset driver told me that the driver I currently have is newer than the one I had just downloaded... Should I update it anyway?

Also, I cant seem to find the sonix usb pc camera driver anywhere... sorry haha
My System SpecsSystem Spec
Reply

 BSOD on new system build




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD over and over with brand new system build...
Hello all, I saw the YouTube video saying to come here for help with BSOD concerns. I've attached what I understand to be dump files. Sure hope someone out there can help identify if I have hardware or driver issues. Any guidance is greatly appreciated, as I'm getting ready to pull my hair out...
BSOD Help and Support
BSOD New system build, memory_management and kmod_exception_not_handle
Hello, I have a new build going that uses some parts from my previous set up.. Asrock z77 extreme4 (new) Intel i7 3770k Ivy Bridge (new) Coolmaster 212 Evo (new) nvidia 560 1gbvram and a nvidia 9600 2gb vram (both from my previous build) crucial ballistic sport 16gb (4x 4gb) (new) (memtest...
BSOD Help and Support
Third BSOD and system reboot on new build
I have just had the third known bsod on this new PC build. running Win7 Ultimate 64bit.
BSOD Help and Support
System crash, BSOD's on new HTPC build
Hey there everyone, I've been a long time lurker on seven forums, and have used the info on your theads to get my google chrome working when win7 first came out. However, this time, I've decided to Move out of Tom's hardware threads and post here for a conclusive answer. I have put together a...
BSOD Help and Support
BSOD with new system build, any help appreciated!
Hi there, I built a new system last week and ever since have been getting random bsods, one every day or so. I have read the forum and tried some of the items suggested - memtest seems ok, system check and chkdsk are fine. Attached are my diag files, any help gratefully received! - Windows...
BSOD Help and Support
New system build BSOD
Just finished a new system build using components all less than 6 months old. Running OEM Windows7 Home x64. Burned in over three days with Prime95 and then 5 runs of Memtest86 with no issues. Loaded CS3 Photoshop last night and then turned on unit today. Within 5 min. ,experienced two BSOD's...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App