Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ntoskrnl bsod

23 Aug 2011   #11
BrutalForce

Windows 7 x64
 
 

Temps still seem w/in range. Fans look ok/clean? Like I said, mine started out intermittent and got exponentially worse. If you have another i3/5/7 you could try swapping it out, otherwise you will have to wait until it gets worse or you can duplicate the crash on demand. Regardless you sound like you are having my identical problem. Check out my last thread for details.


My System SpecsSystem Spec
.
23 Aug 2011   #12
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Sharon,
Will take a look at latest .dmp files later.

If you only run one and only one program at a time, no matter what that program is, does the problem still surface.
My System SpecsSystem Spec
24 Aug 2011   #13
sharonross

Widows 7 home premium 64 bit
 
 

I don't think it matters. For example at least 2 of yesterday's crashes were while I was away from the pc and I think all programs barring windows 7 were closed.
Sunday and Monday the pc was on permanently while running driver verified. And it didn't crash at one stage I opened at least 5 programs.
Yesterday we had to turn the pc off and unplug and when turned back on again we started gettig the bsods while verified was running
My System SpecsSystem Spec
.

24 Aug 2011   #14
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Sharon,

I think you will find this thread interesting since you asacpi.sys file is from 2005.

http://www.sevenforums.com/crashes-d...ease-help.html
My System SpecsSystem Spec
24 Aug 2011   #15
sharonross

Widows 7 home premium 64 bit
 
 

I have now updated the asacpi.sys file. Now we just have to wait and see.
My System SpecsSystem Spec
24 Aug 2011   #16
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by sharonross View Post
I have now updated the asacpi.sys file. Now we just have to wait and see.
Good job and good luck
My System SpecsSystem Spec
25 Aug 2011   #17
sharonross

Widows 7 home premium 64 bit
 
 

I spoke too soon. Its crashed again. Ive attached the file
My System SpecsSystem Spec
25 Aug 2011   #18
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

update your wacomm software/drivers
My System SpecsSystem Spec
25 Aug 2011   #19
sharonross

Widows 7 home premium 64 bit
 
 

thanks for the suggestions
Wacomm driver now upto date
so again we play the waiting game
My System SpecsSystem Spec
26 Aug 2011   #20
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by sharonross View Post
I spoke too soon. Its crashed again. Ive attached the file

33 of 50 crashes directly point to memory corruption the rest indirectly.


Memory corruption probably caused by a driver. please run these two tests




1-Memtest.


*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier


Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
Reply

 Ntoskrnl bsod




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame
i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff 110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc ...
BSOD Help and Support
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a
When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off. Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now. Thanks...
BSOD Help and Support
BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640
Jan 2014 //------------------------------------------- How to Solve : 1- I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state.(original windows :)) 2- Never installed Norton internet security again , I'm using Microsoft Security Essentials now. 3-...
BSOD Help and Support
Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0
I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and...
BSOD Help and Support
BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40
I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere. So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App