Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: xbox controller BSOD

23 Aug 2011   #1
pavlos77

Windows 7 Ultimate x64
 
 
xbox controller BSOD

Hi i'm a new member and i tried yesterday to install the xbox controller's drivers on windows 7 x64 but when i connected it, it installs his windows drivers and it shows me a blue screen and the error is wdf0100.sys.Can you help me?


My System SpecsSystem Spec
.

23 Aug 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by pavlos77 View Post
Hi i'm a new member and i tried yesterday to install the xbox controller's drivers on windows 7 x64 but when i connected it, it installs his windows drivers and it shows me a blue screen and the error is wdf0100.sys.Can you help me?

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.
My System SpecsSystem Spec
23 Aug 2011   #3
pavlos77

Windows 7 Ultimate x64
 
 

Here is the dump file :
My System SpecsSystem Spec
.


23 Aug 2011   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by pavlos77 View Post
Here is the dump file :
This was Related to MijXfilt.sys DS3 driver from MotioninJoy. I would re-install newest available driver. Yours dated over a year ago.
My System SpecsSystem Spec
24 Aug 2011   #5
pavlos77

Windows 7 Ultimate x64
 
 

I have uploaded two new files...
My System SpecsSystem Spec
24 Aug 2011   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by pavlos77 View Post
I have uploaded two new files...

Still the same. A memory exception caused by the same driver. Please run these two tests.




1-Memtest.


*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier


Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
24 Aug 2011   #7
pavlos77

Windows 7 Ultimate x64
 
 

I don't have a problem with the blue screen because i did a system restore and it's fine .I want only ,when i connect the controller to stop it from installing drivers automaticaly because it shows me blue screen...If you don't understand what i said asked me...I have tried to change drivers installing setting but it's not work...Look at the attached files
My System SpecsSystem Spec
Reply

 xbox controller BSOD




Thread Tools





Similar help and support threads
Thread Forum
BSOD error using a Xbox controller
Hi everyone, I've recently gotten BSODs when playing Steam games using my controller, (that sometimes disconnects/reconnects itself very quiclky while i'm playing) so i've wondered if you could help ^^" My debug file should come up with this thread if i did not mess it up, thanks in advance!
BSOD Help and Support
BSOD trying to use Xbox 360 Wired Controller (Win 7 HP x64)
I've used a wireless 360 controller with receiver now flawlessly for ~1 year. Bought a Wired one today, except whenever I plug it in, I get an immediate BSOD! I've taken the usual precautions of uninstalling MotionInJoy (both from control panel AND by deleting the appropriate driver from...
BSOD Help and Support
Did my Xbox 360 PC Controller cause this bsod?
Hey guys, im no expert in viewing dump files so if anyone can analyse this dump file I have from when I got the bsod and tell me what caused it, i will be very grateful :) 112511-16317-01.rar It happened as I loaded Crysis 2, I inserted my pc xbox controller and a few seconds later I got a...
BSOD Help and Support
Xbox 360 controller wired BSOD
Hello everyone, I just bought a xbox 360 controller wired via amazon. After plugging it in there instantly appeared a blue screen: Problemereignisname: BlueScreen Betriebsystemversion: 6.1.7601.2.1.0.768.3 Gebietsschema-ID: 1031 Zusatzinformationen zum Problem: BCCode: ...
BSOD Help and Support
BSOD Xbox 360 Madcatz Controller ?
i recently (3 days) have been having problems with my controller. i plug in the USB controller and it works fine , but i hear a plugging/unplugging a USB noise. so i usually ignore it. then, the BSOD comes up. please help me out. thanks a ton. I attached a dumps rar to show my recent dumps,...
BSOD Help and Support
BSOD Crash With XBOX Controller
Hi, Ive got a pretty stable system generally (few games crash anyway) but when I plug in my Xbox controller into my USB slot I get a BSOD. Have attached the required dump and system health check plus a screenshot of the actual BSOD. Windows 7 Pro 64bit (Retail bought when W7 first launched...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App