Windows 7: Can not solve this one

Today I purchest a ASUS 560 DC and ANTEC 750w earthwatts, the thing I am having trouble with is that I hear the 1 beep on the POST and that's fine, however I get a contentious beep after that.... everything works fine I can boot into windows I installed the drivers did the windows experience thing boosted my score no problem.

Thing I have tried, resetting everything CPU, RAM, GPU, checked that the PCI-E power is connected (I need 2x6pins both are running off a different cable), if I take the RAM out it gives me the usual beep code.

I have also heard that its a GPU mobo beep code error, but the only thing I can think of the power is not connected to the GPU but it is.

Don't be offended for me checking but what exactly do you mean by:
Do you mean a continuous beep?

Your mobo comes with these beep codes:
Any idea which one it is?

As I sead before I get passed POST fine with 1 beep like normal then the Continuous (endless beep there is no patten) just keeps going.

re-seat the graphics card.

Take the side off and make sure that the beep is coming from the speaker and not from one of your fans.

Already tried a my previous graphic card no go the beeping is still there and the beeping is coming from the PC speaker.

UPDATE: Just blew the PCI-E and RAM shots out with the compressor and it seems to work fine atm, but the way 70C is too high for a Intel CPU right?

No.... some are ok up to 90% when on load... If that is the temp whilst IDLE... it is too hot.

Idle is 30-35c but at load the temp gets up to 70-74c

If that is a stable temp and it doesn't spike... + you checked airflow/fans etc.. then I wouldn't worry about it.

You have a Q6600 quad core and should run at 60c max, you need to look at your case and CPU cooling setup.