Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD BCCode 50 problem pls help to debug

27 Aug 2011   #1

windows 7 ultimate 64bit
BSOD BCCode 50 problem pls help to debug

my new system has windows 7 ultimate 64 bit i am facing BSOD BCCode 50 problem pls help to debug ..
core i3
intel mother board
4GB ram

i have attached my dump files ..
pls help me

My System SpecsSystem Spec

27 Aug 2011   #2

Windows 10 Pro x64

BSODs seemed to be cause by a Norton software, you should completely reinstall it or remove it
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: ffffea8003b95c80, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff80002ade00c, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000007, (reserved)

Debugging Details:

Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d0f0e0

fffff800`02ade00c f0480fc11f      lock xadd qword ptr [rdi],rbx







TRAP_FRAME:  fffff88007410980 -- (.trap 0xfffff88007410980)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=ffffea8003b95cb0
rdx=0000000000000084 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ade00c rsp=fffff88007410b10 rbp=fffff88007410c60
 r8=fffff78000000008  r9=0000000000000001 r10=fffffa8003716501
r11=fffff80002c51e80 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
fffff800`02ade00c f0480fc11f      lock xadd qword ptr [rdi],rbx ds:5cb0:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002b56b19 to fffff80002ad8f00

fffff880`07410818 fffff800`02b56b19 : 00000000`00000050 ffffea80`03b95c80 00000000`00000001 fffff880`07410980 : nt!KeBugCheckEx
fffff880`07410820 fffff800`02ad6fee : 00000000`00000001 ffffffff`ffffffff 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x40edb
fffff880`07410980 fffff800`02ade00c : 00000000`00000001 00000000`00000000 00000000`026fd398 00000000`74822450 : nt!KiPageFault+0x16e
fffff880`07410b10 fffff800`02dd0acc : fffff880`07410c60 ffffea80`03b95cb0 fffff880`07410bb8 00000000`00000001 : nt!ObfDereferenceObject+0x2c
fffff880`07410b70 fffff800`02ad8153 : fffffa80`03b7eb60 00000000`00000000 fffff880`07410bb8 fffffa80`03b95cb0 : nt!NtWaitForSingleObject+0xcc
fffff880`07410be0 00000000`74822dd9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`023af0f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x74822dd9


nt! ?? ::FNODOBFM::`string'+40edb
fffff800`02b56b19 cc              int     3


SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+40edb

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0x50_nt!_??_::FNODOBFM::_string_+40edb

BUCKET_ID:  X64_0x50_nt!_??_::FNODOBFM::_string_+40edb

Followup: MachineOwner
My System SpecsSystem Spec
27 Aug 2011   #3

windows 7 ultimate 64bit

thanks .. i will uninstall it n try..
My System SpecsSystem Spec

28 Aug 2011   #4

windows 7 ultimate 64bit

i got same problem after uninstalling Norton AV, i ran memtest no problems detected.
i hv attached new dump files . pls help me out
My System SpecsSystem Spec
28 Aug 2011   #5

MS Windows 7 Ultimate SP1 64-bit

Quote   Quote: Originally Posted by shishirkn View Post
i got same problem after uninstalling Norton AV, i ran memtest no problems detected.
i hv attached new dump files . pls help me out

Please start a threaqd of your own.

Do not tack onto another one.

Your cooperation is appreciated.
My System SpecsSystem Spec

 BSOD BCCode 50 problem pls help to debug

Thread Tools

Similar help and support threads
Thread Forum
How Can I Debug BSOD Errors?
Hi, I want to learn how to debug BSODs. I work with computers, so learning this would really help! I can use Windbg to certain level and find out some information about the crash. I get to a certain point where I cannot be sure what caused the crash. Please see the example. Can anyone help me...
BSOD Help and Support
BSOD during high bandwith situations. Bccode a, bccode b1.
I've completely reinstalled my system from the ground up twice over this last weekend. Still gettin the BSOD's at least daily. Here's a zip of the latest dump. It seems to really only BS when I'm running high bandwith/ memory. I.E. videogames/teamspeak/Pandora simultaneously My system is an ...
BSOD Help and Support
BSOD from new memory card, BCCode:d1 & BCCode:fc
x64 full retail around 4 year old comp The memory I use on my PC is: "Corsair TWIN2X4096-8500C5D Dominator 4GB 2 X 2GB PC2-8500 1066MHz 240-Pin DDR2 CL5 Dual Channel Desktop Memory" Wanting more memory I decided to to place: "OCZ DDR2 PC2-8500 Platinum 4GB Edition Dual Channel *EOL" ...
BSOD Help and Support
Debug 0x10D BSOD
I'll be very grateful if I can get some help debugging a BSOD with the 0x10D Stop code. I attached the minidump file, which is from a Win 7 Starter Edition 32-bit system. The crash occurs within a few seconds of logon, while Win 7 is trying to install drivers. I can't get to the description of the...
BSOD Help and Support
BSOD Please help debug
Hello, Can someone please take a look at my dump file. I get lots of win7 crashes with different error codes, and I'm not sure where to start. Thanks, Bill
BSOD Help and Support
Explorer Problem - Please help me debug!
Hello and thank you for your time. I am having this issue that is really annoying me and I have now idea how to fix it!!! I am running Win 7 x64, and every time I open the My Downloads folder, and then just select a file, or try to move or something, the error "Windows Explorer has stopped...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:08.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App