New
#11
What you do with driver sweeper is download and install it. Reboot the computer into safe mode by tapping the F8 key when it's booting then when you come to the black screen with all the commands select safe mode then when you come to your desktop run driver sweeper and select the box that says AMD and click analyze it will then scan the computer and find all the ati stuff on you computer. Then select the clean and it will remove it all. Then boot back up normally and download the software package again or if you already have it go ahead and install it. By the way everything will be huge as you won't have any display drivers in the computer. I try and locate these other drivers for you..
Realtek PCIe GBE Family Controller: Realtek
Intel's Chipset drivers: http://downloadcenter.intel.com/Deta...P55KG&lang=eng
Hey Seth
thank you so much again. I did as you said and followed the instructions and succesfully clean installed the new AMD Radeon HD 6670
Anyhow, i got 2 bsods today (none yesterday) after that, so should be the last bits.
Can you find out where the problem is coming from here?
I didn't update the network card & family thingys yet cause I wanted to know if this would make them go away.
new minidump in attachment
I have no idea idea how to install the Realtek PCIe GBE Family Controller, i downloaded the zip but the files in it... no idea
What you do Dennis is open up device manager and right click on your network card>then click on update driver software>then browse my computer for drivers>next make sure subfolders box is checked and navigate to the folder where you unzipped the files and click next and then close. That should be all there is to it..
Alright worked like a charm, again thanks Seth lol
you're so helpful
i did what you say, i updated all drivers now but after the realtek one i got a bsod. then I updated the intel ones from the link you gave me. hope i won't experience things anymore now.
last minidump hopefully in attachment.
OK Dennis it looks like we need to run Driver Verifier and pin this driver down. Please follow this guide and while driver verifier is enabled let the computer BSOD a few times (3) usually it won't even get to the desktop. Here's the guide:
Driver Verifier - Enable and Disable after this reboot in safe mode if you can't get to the desktop in normal mode and run verifier again and delete the setting so it's turned off.
then after that run the JCGriff software by following this guide:
https://www.sevenforums.com/crashes-d...tructions.html
then upload all that info in your next post...