Windows 7: BLOD Random new build, windows 7 64 bit

hi there i recently within the last week built cpu installed windows 7 64 bit.seemed to run smooth but all sudden BSOD.ive ran a few or the drive programs ive got an error/UPDATES for
Realtek audio Hd, INTE/r 82801 pcI BRIDGE 244E.
i take it thats on my motherboard and its a Asrock Fatality preformance.ill include the screen shot and minidump.i dragged my minidump to desktop to try to compress only way it let me.something about permission access denied.anyway hope i can get some steps i need to take any help would be good.

No DMP files uploaded. Try this method.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

thanks i did what you said on the sysdm.cpl i checked off auto restart.and changed to 256 small mem dump.i post minidump just as you said i saved it to my temp folder and compressed.im not sure if its possible but i think i may have messed up file by dragging to my desktop thats why the file is saying shortcut for my minidump(edit)yea looks like same file i guess ill have to wait until it happens again.

Yep it is way too small to be a DMP file. That DMP file should still be there. You didnt actually drag the file to your desktop you made a shortcut to it.

If you hold down the shift key while dragging it will move it.

Yea not sure what i did with file.but heres what i have done so far to try and fix problem.first updated bios on my motherboard.I also made sure my ssd was updated.next ran memtest86 with both sticks got over 1000 errors. Then did one by one and only 1 was causing errors,then i left the stick causing errors just to see if it would blod but it didnt.so im putting an rma to corsair.my only question i noticed when putting rma to corsair they had compatible ram for fatality preformance mobo,do they have to be specific specs.im using ddr3 8-8-8-24 1.5v 1600 MHz
.