Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Usually code 1a

26 Sep 2011   #1

Windows 7 Ultimate x64
BSOD Usually code 1a

Blue screens about every 20 minutes or so, about 50 crash dumps attached. thanks for any help you can provide.

Windows 7 Ultimate
AMD athlon II 645 processor
ASRock K10N78D Mobo
Nvidia 720D chipset
Geforce GTX 260
8 gigs ram
430W PS
2TB Raid 0
VIA high definition audio

My System SpecsSystem Spec

26 Sep 2011   #2

Microsoft Community Contributor Award Recipient

Windows 7 x64

Most the dumps actually point to memory corruption. Enough so that I'm going to go ahead and say you have bad timings/overclock or a bad ram stick.
Running memtest86 overnight is usually the best test for this, and it takes windows and other processes out of the mix.

There's a detailed tutorial with screens and instructions for it's use here.
RAM - Test with Memtest86+

Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+425 )

Followup: MachineOwner

2: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffffa80cdf8901b, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002a7b4cf, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000005, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cc3100

fffff800`02a7b4cf 410fb65e1b      movzx   ebx,byte ptr [r14+1Bh]







TRAP_FRAME:  fffff880037167c0 -- (.trap 0xfffff880037167c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffff6fcc0197230
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002a7b4cf rsp=fffff88003716950 rbp=007ffffcc0197233
 r8=0000000000000001  r9=fffff80002cc6ac0 r10=0000000000000005
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
fffff800`02a7b4cf 410fb65e1b      movzx   ebx,byte ptr [r14+1Bh] ds:77d8:00000000`0000001b=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a3b3bf to fffff80002a90c40

fffff880`03716658 fffff800`02a3b3bf : 00000000`00000050 fffffa80`cdf8901b 00000000`00000000 fffff880`037167c0 : nt!KeBugCheckEx
fffff880`03716660 fffff800`02a8ed6e : 00000000`00000000 fffffa80`cdf8901b 00000000`00001000 f8a00044`a8300400 : nt! ?? ::FNODOBFM::`string'+0x44791
fffff880`037167c0 fffff800`02a7b4cf : 00000000`04d3b000 04100000`23ec3921 00000000`00000000 00000000`00012041 : nt!KiPageFault+0x16e
fffff880`03716950 fffff800`02b0cac5 : fffff800`02cc6ac0 fffff880`00000001 00000000`00000001 fffff880`03716bb0 : nt!MiAgeWorkingSet+0x425
fffff880`03716b00 fffff800`02a7b826 : 00000000`00000706 00000000`00000000 fffffa80`00000000 00000000`00000005 : nt! ?? ::FNODOBFM::`string'+0x4d786
fffff880`03716b80 fffff800`02a7bcd3 : 00000000`00000008 fffff880`03716c10 00000000`00000001 fffffa80`00000000 : nt!MmWorkingSetManager+0x6e
fffff880`03716bd0 fffff800`02d2bfee : fffffa80`06a47200 00000000`00000080 fffffa80`069a5b30 00000000`00000001 : nt!KeBalanceSetManager+0x1c3
fffff880`03716d40 fffff800`02a825e6 : fffff880`03364180 fffffa80`06a47200 fffff880`0336efc0 fef5bdff`bfffdbe7 : nt!PspSystemThreadStartup+0x5a
fffff880`03716d80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


fffff800`02a7b4cf 410fb65e1b      movzx   ebx,byte ptr [r14+1Bh]


SYMBOL_NAME:  nt!MiAgeWorkingSet+425

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x50_nt!MiAgeWorkingSet+425

BUCKET_ID:  X64_0x50_nt!MiAgeWorkingSet+425

Followup: MachineOwner
My System SpecsSystem Spec
26 Sep 2011   #3

Windows 7 Ultimate x64

I have pulled RAM sticks out 1 by 1 as I get new BSOD. Have been running fine now for over an hour without a crash. Will leave it running overnight and will mark this solved tomorow. thank you Maguscreed for your time and assistance!
My System SpecsSystem Spec


 BSOD Usually code 1a

Thread Tools

Similar help and support threads for2: BSOD Usually code 1a
Thread Forum
BSOD PLaying League of Legends error code 0x0000001e a common code BSOD Help and Support
Window's updates errors, code 80073712 and code 9c47 Windows Updates & Activation
Windows Update errors Code 800B0100 and Code 8007065E, tried everythin Windows Updates & Activation
BSOD Code:101 BSOD Help and Support
Solved BSOD code help BSOD Help and Support
BC Code 1a,50 BSOD BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:31 PM.
Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33