BSOD playing StarCraft 2 and Street Fighter, varying types


  1. Posts : 4
    Windows 7 Ultimate x64
       #1

    BSOD playing StarCraft 2 and Street Fighter, varying types


    This only occurs about once a day now after running CCleaner and having a friend run other programs that seemed to have cleaned up my computer.
    Seems to only occur during a videogame.

    Any help is appreciated.

    AMD Phenom(tm) II X4 B50 Processor
    4096MB RAM
    Windows 7 Ultimate 64 bit
      My Computer


  2. Posts : 5,405
    Windows 7 Ultimate 64bit SP1
       #2

    Hi strat welcome to SF :)

    You must be very careful when using CCleaner or other programs for pc <<cleaning>>

    The most recent minidumps points to hardware fault.

    Though For first step please try to use a System restore point.

    System Restore

    System Recovery Options

    Finish
    with this step and post back with any results.
      My Computer


  3. Posts : 4
    Windows 7 Ultimate x64
    Thread Starter
       #3

    I tried a system restore, but there are "no restore points on your computer's system drive".
      My Computer


  4. Posts : 4
    Windows 7 Ultimate x64
    Thread Starter
       #4

    I have uninstalled and reinstalled the most current driver for my graphics card.
    I just got a blue screen about 15 minutes ago playing League of Legends.

    Thought I installed graphics drivers correctly, but apparently not.
    Graphics drivers are now up to date.
    Last edited by strat; 28 Sep 2011 at 20:52. Reason: Attached minidump
      My Computer


  5. Posts : 5,405
    Windows 7 Ultimate 64bit SP1
       #5

    The first\oldest minidumps points to that,crash occur during running XSplit.Core.ex
    http://www.xsplit.com/download/

    If its possible uninstall XSplit.

    The new\recent minidump points to system file.

    Please run system-file-checker you may need to run the sfc 2-3 times to fix everything.

    Then update your windows using the windows update.

    Finish with the above step and post back with any results.
    Last edited by panais; 29 Sep 2011 at 04:59.
      My Computer


  6. Posts : 4
    Windows 7 Ultimate x64
    Thread Starter
       #6

    I've ran system file checker, updated as much as I could through Windows and uninstalled XSplit.
    Problems still persist.
    I've attached the recent BSOD's that have happened even after these suggestions.
      My Computer


  7. Posts : 28,845
    Win 8 Release candidate 8400
       #7

    strat said:
    I've ran system file checker, updated as much as I could through Windows and uninstalled XSplit.
    Problems still persist.
    I've attached the recent BSOD's that have happened even after these suggestions.
    These 3 were apc mismatch caused by a driver please run these two tests.


    1-Memtest.

    *Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

    *Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.

    RAM - Test with Memtest86+



    2-Driver verifier

    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
    Driver Verifier - Enable and Disable
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:51.
Find Us