Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a

05 Oct 2011   #11
talkiestwinner

Windows 7 64bit
 
 

I appreciate the help, but I ran a system file scan and it yielded no errors. I uninstalled the power save from GIGABYTE, which wasn't very useful in the first place, and yet I'm still getting the SPECIAL_POOL error.

On a different note, I've checked in my BIOS that my DRAM Voltage is at 1.51V, but my RAM specs say (Newegg.com - Patriot Gamer 2 Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model PGD38G1333ELK) 1.65V is the voltage that it should be at. I think that might be the problem for the MEMORY_MANAGEMENT error, and I can always system restore to get rid of the special pool error to a time before I started verifier.exe.

I have also had a PNF error, which is about the third one down in the list. I think it might go hand in hand with the Memory Management one, but I'm not quite sure. If you want to check it, that would be fine, but if not, It doesn't matter right now.


My System SpecsSystem Spec
.
05 Oct 2011   #12
talkiestwinner

Windows 7 64bit
 
 

I'm sorry, but I'm going to go ahead and bump this. I want to try and up the voltage on my RAM, and I believe I know how. Would this possibly solve the problem?
My System SpecsSystem Spec
05 Oct 2011   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by talkiestwinner View Post
I'm sorry, but I'm going to go ahead and bump this. I want to try and up the voltage on my RAM, and I believe I know how. Would this possibly solve the problem?
Wish I could give you a definitive answer, but it might or might not. If you know how and the machine isnt under warranty I would give it a shot.
My System SpecsSystem Spec
.

05 Oct 2011   #14
talkiestwinner

Windows 7 64bit
 
 

Could it damage the RAM? If so I don't really care, but if it can damage other components I probably won't attempt it. I'm only looking to vamp it up to 1.65V (which is the spec) from 1.5.
My System SpecsSystem Spec
05 Oct 2011   #15
Sub Styler

Windows 7 Ultimate x64
 
 

Bumping the voltage up to meet it's rated spec will not damage the ram or the board and if it does then will be covered by warranty. Memory that doesnt use XMP (and often Memory that does) isnt always detected correctly by the BIOS. You can safely change all the RAM settings in the BIOS to exactly match that or the RAM for the best possible chance at stability. This includes the bus speed, latency and voltage.

If you believe only the voltage to be an issue then just change that.

If the other settings dont look right either then you may have tune the bus and latency aswell. Depending on the Motherboard and BIOS changing the Bus frequency of the ram may directly alter the bus speed of the CPU, in this case you may need to change them from linked to unlinked or possibly change the ratio. It's getting a bit technical now so if you are unsure get the shop to do it.

DO NOT EXCEED THE RATED VOLTAGE, THIS WILL VOID YOUR WARRANTY AND IS LIKELY TO DAMAGE YOUR RAM.
My System SpecsSystem Spec
Reply

 BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when Stress Testing, MEMORY_MANAGEMENT 0x0000001a
Hello, I have recently been stress testing my system to ensure that it is 100% stable before i proceed to overclocking. I first ran P-95 a couple of times and each time i got a BSOD after about 10 minutes. I thought i fresh install of windows would fix the problem, so i tried that. No luck, i...
BSOD Help and Support
BSOD (MEMORY_MANAGEMENT, 0x0000001a)
Hey, since 2 days ago I'm getting BSOD's at seemingly random intervals. I've provided an SF Dump in the attachments, and here's the error; Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1043 Additional information about the problem: ...
BSOD Help and Support
BSOD Memory_Management 0x0000001A
Hi all, I've been experiencing numerous BSOD on a new build Zotac ID90 running Windows 7. The BSOD message is always "MEMORY_MANAGEMENT" leading me to suspect that this may be an indication of faulty RAM. I'm about to run a series of memtest86+ tests but wondered if anyone can spot anything else...
BSOD Help and Support
New build memory_management BSOD (0x0000001a)
Hi I've recently finished a new build but for the first 2 boots of every day I get the memory_management BSOD and then I will not happen again until the next day no matter what I do. I have also had the Page Fault in Nonpaged Area BSOD and multiple process exceptions if window actually starts...
BSOD Help and Support
BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a
This is unbearable. Win7-64b Had constant mem management bsods when putting together a new system, ran verifier and mem test for going on 13hrs and both came up fine. Replaced the motherboard and still had the same errors, thought it might be a corrupt install so clean installed win7...
BSOD Help and Support
BSOD Memory_Management Stop: 0x0000001a
Hi, I have a VOSTRO 1500 upgraded from Windows XP to Windows 7 However, after the upgrade i've been getting the bluescreen attached. Please advise? anyone..? Thanks!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App