Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a

04 Oct 2011   #1
talkiestwinner

Windows 7 64bit
 
 
BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a

This has been happening ever since I built my computer. I tried memtest86, but it said I had 400,000 errors, and it was checking my CPU for some reason.

I'm running Windows 7 on a 64bit computer. It isn't even a month old yet, I had to install the OS, full retail.

I appreciate any help I can receive.


My System SpecsSystem Spec
.
04 Oct 2011   #2
Terronium 12

Windows 10 Technical Preview - x64
 
 

Without looking at the dumps (someone with more experience in that area than myself will surely chime in), I can tell you right now that one (if not both) of your DIMMs are no good. Run the test again with one stick installed for about, I'd say 4-5 passes, if it fails then go to the next stick. If it happens again you need new RAM.

It could also be an OC-related error, if applicable. Perhaps there's not enough voltage, perhaps you're not running the proper timings.
My System SpecsSystem Spec
04 Oct 2011   #3
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by talkiestwinner View Post
This has been happening ever since I built my computer. I tried memtest86, but it said I had 400,000 errors, and it was checking my CPU for some reason.

I'm running Windows 7 on a 64bit computer. It isn't even a month old yet, I had to install the OS, full retail.

I appreciate any help I can receive.
If memtest says there are that many errors it is either the memory or the mobo slot.
My System SpecsSystem Spec
.

04 Oct 2011   #4
talkiestwinner

Windows 7 64bit
 
 

I think it is the mobo slots, but I've tried nearly all of them at this point. I'll probably fiddle with the RAM some more. As for wattage: I'm running a 550w PSU. I thought that would be enough. I'm thinking the problem is most likely the RAM slots, and if so, I will be very disappointed. I would still like someone to look at the dump files as I am not able to.
My System SpecsSystem Spec
04 Oct 2011   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by talkiestwinner View Post
I think it is the mobo slots, but I've tried nearly all of them at this point. I'll probably fiddle with the RAM some more. As for wattage: I'm running a 550w PSU. I thought that would be enough. I'm thinking the problem is most likely the RAM slots, and if so, I will be very disappointed. I would still like someone to look at the dump files as I am not able to.

All three point to memory management. Usually a driver. You can run driver verifier to confirm it.

Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

My System SpecsSystem Spec
04 Oct 2011   #6
talkiestwinner

Windows 7 64bit
 
 

I tried Verifier.exe, but invariably it would crash giving me a SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION. After closing Verifier.exe through running "verifier /restart", which I read turns it off, I still got the same BSOD message about a special pool. Is this indicative of anything? I would assume MEMORY_CORRUPTION means it's my memory. I didn't let it run for 36 hours straight, because undoubtedly it would crash within a short amount of time and each time it would give me the same message without giving me any sort of feedback.
My System SpecsSystem Spec
04 Oct 2011   #7
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by talkiestwinner View Post
I tried Verifier.exe, but invariably it would crash giving me a SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION. After closing Verifier.exe through running "verifier /restart", which I read turns it off, I still got the same BSOD message about a special pool. Is this indicative of anything? I would assume MEMORY_CORRUPTION means it's my memory. I didn't let it run for 36 hours straight, because undoubtedly it would crash within a short amount of time.
Special pool.... May just mean a driver and not the physical ram. When it crashed it should have created a new DMP and that might tell us which. Please upload the MDPS.
My System SpecsSystem Spec
04 Oct 2011   #8
talkiestwinner

Windows 7 64bit
 
 

Okay, I updated the DMPs that I uploaded prior. The last one is the SPECIAL_POOL error. I ran verifier, and I believe I still am, and I knew that I could get the error when I restarted or turned off my computer. For some reason I had deleted the old files, so I ran it again and got the error. I'm sure it will persist now until I find a way to shut off verifier, but oh well.

On a side note: I have been getting the MEMORY_MANAGEMENT error when I end a game of League of Legends. It has happened while I've been playing other games as well (Borderlands).
My System SpecsSystem Spec
04 Oct 2011   #9
Beast52702

Win 7 64bit Ultimate
 
 

Terronium 12 was talking about the voltage to your ram modules, not the wattage of your power supply. If the RAM is not getting sufficient voltage it will not run correctly at its given timings. You can adjust the ram voltage in the bios. Bios can be accessed at startup by pressing whatever key is denoted for system setup(usually says on bottom or top of screen). It may take a few restarts to figure out which key it is, depending on the speed of your boot menu.

I would look up the specs for your specific ram and ensure that the voltage setting in the bios atleast meets the minimum voltage.

All that aside, that many errors in memtest86+ points pretty strongly to corrupt memory. Very rare to get a mobo with all bad ram slots
My System SpecsSystem Spec
04 Oct 2011   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Most recent DMP was Related to Gigabyte Easy Energy Saver it's a motherboard utility that manage the power of CPU, fan and may others. Note: Located in \%Program Files%\Gigabyte\EasySaver\.

I would remove to test, or failing that update it to the newest version available.

Also related was gdrv.sys 3/12/2009 11:22:29 PM (Related to gdrv.sys Microsoft Register Server.). It is dated before win 7 was released so I suspect this OS was an upgrade.

Please run a system file check

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.



My System SpecsSystem Spec
Reply

 BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a




Thread Tools




Similar help and support threads
Thread Forum
BSOD when Stress Testing, MEMORY_MANAGEMENT 0x0000001a
Hello, I have recently been stress testing my system to ensure that it is 100% stable before i proceed to overclocking. I first ran P-95 a couple of times and each time i got a BSOD after about 10 minutes. I thought i fresh install of windows would fix the problem, so i tried that. No luck, i...
BSOD Help and Support
BSOD (MEMORY_MANAGEMENT, 0x0000001a)
Hey, since 2 days ago I'm getting BSOD's at seemingly random intervals. I've provided an SF Dump in the attachments, and here's the error; Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1043 Additional information about the problem: ...
BSOD Help and Support
BSOD Memory_Management 0x0000001A
Hi all, I've been experiencing numerous BSOD on a new build Zotac ID90 running Windows 7. The BSOD message is always "MEMORY_MANAGEMENT" leading me to suspect that this may be an indication of faulty RAM. I'm about to run a series of memtest86+ tests but wondered if anyone can spot anything else...
BSOD Help and Support
New build memory_management BSOD (0x0000001a)
Hi I've recently finished a new build but for the first 2 boots of every day I get the memory_management BSOD and then I will not happen again until the next day no matter what I do. I have also had the Page Fault in Nonpaged Area BSOD and multiple process exceptions if window actually starts...
BSOD Help and Support
BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a
This is unbearable. Win7-64b Had constant mem management bsods when putting together a new system, ran verifier and mem test for going on 13hrs and both came up fine. Replaced the motherboard and still had the same errors, thought it might be a corrupt install so clean installed win7...
BSOD Help and Support
BSOD Memory_Management Stop: 0x0000001a
Hi, I have a VOSTRO 1500 upgraded from Windows XP to Windows 7 However, after the upgrade i've been getting the bluescreen attached. Please advise? anyone..? Thanks!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App