Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a

04 Oct 2011   #1
LAE

Win 7 Ultimate 64-bit
 
 
BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a

This is unbearable.

Win7-64b

Had constant mem management bsods when putting together a new system, ran verifier and mem test for going on 13hrs and both came up fine.
Replaced the motherboard and still had the same errors, thought it might be a corrupt install so clean installed win7 64-bit and it was fine for a day or so and now the errors are popping up again.

3 Bsods this morning:

SYSTEM_SERVICE_EXCEPTION 0x0000003b
MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a
NTFS_FILE_SYSTEM 0x00000024

in that order.

Thought it might be a corrupt hdd but not ive just no idea. I think i have no choice but to replace the ram. It happens at random, and often would happen a couple minutes into ever start up, as soon as everything was loaded and i started using the computer it would bsod. Then when restarting all would be fine.

Any ideas?


My System SpecsSystem Spec
.
04 Oct 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by LAE View Post
This is unbearable.

Win7-64b

Had constant mem management bsods when putting together a new system, ran verifier and mem test for going on 13hrs and both came up fine.
Replaced the motherboard and still had the same errors, thought it might be a corrupt install so clean installed win7 64-bit and it was fine for a day or so and now the errors are popping up again.

3 Bsods this morning:

SYSTEM_SERVICE_EXCEPTION 0x0000003b
MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a
NTFS_FILE_SYSTEM 0x00000024

in that order.

Thought it might be a corrupt hdd but not ive just no idea. I think i have no choice but to replace the ram. It happens at random, and often would happen a couple minutes into ever start up, as soon as everything was loaded and i started using the computer it would bsod. Then when restarting all would be fine.

Any ideas?


These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.


1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
05 Oct 2011   #3
LAE

Win 7 Ultimate 64-bit
 
 

As I said in my original post, I ran verifier and memtest (13hrs) and both came up clean. I'm at wrk at the moment but ill run the sticks again individually and in all slots.

Surely its hardware considering the clean install??
My System SpecsSystem Spec
.

05 Oct 2011   #4
LAE

Win 7 Ultimate 64-bit
 
 

Now this is weird, i used the cd memtest n left it running on the different ram sticks, the 3rd however did not want the computer to start. It couldn't make it past post. Nice ive found the dodgey one.

swapped em out put the other two back in and started the computer up. EXTREMELY slow, seriously taking 2-4minutes to open simple programs and some webpages aren't fully opening.
I figured it might be the verifier getting to work and left it be, fell asleep and come back to a restarted computer.

bsod:
DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION 0x000000d6

so the verifier has found something. Both a dodgy stick and a dodgy driver?

100511-110901-01.dmp is the last verifier induced bsod. what to do now?
My System SpecsSystem Spec
05 Oct 2011   #5
LAE

Win 7 Ultimate 64-bit
 
 

anyone?

tried the ram that i thought was bad in the other slots and it worked, then tried it back in the first and it worked fine. So confused now.
Memtests show nothing, i really have no idea what the problem is now. corrupt hdd?

The computer is running extremely slow now, 10+minutes to loadup, all programs are taking 30sec-1min to load.
This shouldn't be a slow computer, I7 3.4 cpu, 6gb ddr3 ram, good hdd, good gfx card.

wtf is going on?? only saving grace now is that there has been no bsods.

EDIT: ok so verifier was still running forgot to disable it, it has returned to normal speed but im still wary of the bsod's. i want it sorted. shall i return the ram?
My System SpecsSystem Spec
06 Oct 2011   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by LAE View Post
Now this is weird, i used the cd memtest n left it running on the different ram sticks, the 3rd however did not want the computer to start. It couldn't make it past post. Nice ive found the dodgey one.

swapped em out put the other two back in and started the computer up. EXTREMELY slow, seriously taking 2-4minutes to open simple programs and some webpages aren't fully opening.
I figured it might be the verifier getting to work and left it be, fell asleep and come back to a restarted computer.

bsod:
DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION 0x000000d6

so the verifier has found something. Both a dodgy stick and a dodgy driver?

100511-110901-01.dmp is the last verifier induced bsod. what to do now?
While not driver verifed most recent crash was Related to CFRMD.sys Safe Delete Filter from COMODO Security Solutions Inc.

I would remove and replace comodo with Microsoft Security Essentials

How to uninstall Comodo Firewall?

Virus, Spyware & Malware Protection | Microsoft Security Essentials
My System SpecsSystem Spec
Reply

 BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD, error 0x0000001A (MEMORY_MANAGEMENT) while idle
Hello, I have the following system: - ASUS Z87-Pro M/B running the latest BIOS 1802 and drivers - Intel Core i7-4770K - 16GB (2x8GB) Kingston KHX24C11T3K2/16X Beast DDR3 2400 - 1xSSD 128GB (Samsung 840 Evo) - 2xHDD 500GB each, one with Windows 7 Ultimate x64 SP1 and the other with Arch...
BSOD Help and Support
BSOD (MEMORY_MANAGEMENT, 0x0000001a)
Hey, since 2 days ago I'm getting BSOD's at seemingly random intervals. I've provided an SF Dump in the attachments, and here's the error; Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1043 Additional information about the problem: ...
BSOD Help and Support
BSOD Memory_Management 0x0000001A
Hi all, I've been experiencing numerous BSOD on a new build Zotac ID90 running Windows 7. The BSOD message is always "MEMORY_MANAGEMENT" leading me to suspect that this may be an indication of faulty RAM. I'm about to run a series of memtest86+ tests but wondered if anyone can spot anything else...
BSOD Help and Support
New build memory_management BSOD (0x0000001a)
Hi I've recently finished a new build but for the first 2 boots of every day I get the memory_management BSOD and then I will not happen again until the next day no matter what I do. I have also had the Page Fault in Nonpaged Area BSOD and multiple process exceptions if window actually starts...
BSOD Help and Support
BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a
This has been happening ever since I built my computer. I tried memtest86, but it said I had 400,000 errors, and it was checking my CPU for some reason. I'm running Windows 7 on a 64bit computer. It isn't even a month old yet, I had to install the OS, full retail. I appreciate any help I can...
BSOD Help and Support
BSOD Memory_Management Stop: 0x0000001a
Hi, I have a VOSTRO 1500 upgraded from Windows XP to Windows 7 However, after the upgrade i've been getting the bluescreen attached. Please advise? anyone..? Thanks!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App