Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help with BS on shutdown

08 Oct 2011   #1

Windows 7 ultimate 32bit
 
 
Help with BS on shutdown

Hiya guys

I have recently discovered a blue screen when I shut down my machine, I am using windows 7, obviously

When I shut down it basically goes to the blue screen and the error message (or at least a part I can catch) says INTERNAL_POWER_ERROR. It then reboots after dumping physical memory and on reboot it performs a disk check on my internal additional hard drive.

I am sorry its all a bit vague is there a way of getting the error code so I can paste it here?

The only thing was, I had a Trojan but avg removed it and I now can't see what it was to see if this is what is making the BS error. I believe it could be virus related as chrome won't load, just shows a White page, all other browsers work fine - just need to make sure the virus is removed and system is back to normal (ps scanned with avg and superantispyware)

Thanks


My System SpecsSystem Spec
.

08 Oct 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Welsh View Post
Hiya guys

I have recently discovered a blue screen when I shut down my machine, I am using windows 7, obviously

When I shut down it basically goes to the blue screen and the error message (or at least a part I can catch) says INTERNAL_POWER_ERROR. It then reboots after dumping physical memory and on reboot it performs a disk check on my internal additional hard drive.

I am sorry its all a bit vague is there a way of getting the error code so I can paste it here?

The only thing was, I had a Trojan but avg removed it and I now can't see what it was to see if this is what is making the BS error. I believe it could be virus related as chrome won't load, just shows a White page, all other browsers work fine - just need to make sure the virus is removed and system is back to normal (ps scanned with avg and superantispyware)

Thanks

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
08 Oct 2011   #3

Windows 7 ultimate 32bit
 
 

Thanks for the info will try get the file posted here asap

Thanks again!!
My System SpecsSystem Spec
.


08 Oct 2011   #4

Windows 7 ultimate 32bit
 
 

Hi

This is the contents of the minidump folder. Hope you are able to help me from this information

Thanks again for your patiants.
My System SpecsSystem Spec
08 Oct 2011   #5

Windows 7 - Vista
 
 

Hi -

All 7 dumps have the same bugcheck -

0xa0 = error occurred while handling a power IRP (I/O request packet). This is a power policy manager failure.

Disconnect any external devices.

BIOS looks old, but I can't say with any certainty that it is involved -
Code:
BiosVendor = Phoenix Technologies, LTD
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
SystemFamily =  
SystemVersion = R01-A4
SystemSKU =  
BaseBoardManufacturer = Acer                 
BaseBoardProduct = F672CR             
BaseBoardVersion = R01-A4
Check Acer Support for BIOS update - http://support.acer.com/us/en/product/default.aspx

I see an old version of LogMeIn in the dumps. Update the app - https://secure.logmein.com/

If BSODs persist, run Driver Verifier - http://www.sysnative.com/0x1/Driver_Verifier.htm

It also could be unknown hardware failure.

Regards. . .

jcgriff2

`


BSOD SUMMARY
Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100811-91556-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Sat Oct  8 05:28:32.783 2011 (GMT-4)
System Uptime: 0 days 1:11:46.623
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 861f1518 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100811-113911-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Sat Oct  8 04:16:06.431 2011 (GMT-4)
System Uptime: 0 days 11:38:34.159
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 861ed768 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100711-98389-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Fri Oct  7 16:36:51.275 2011 (GMT-4)
System Uptime: 0 days 1:47:59.115
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 861e7cd0 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100711-112975-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Fri Oct  7 14:47:49.521 2011 (GMT-4)
System Uptime: 0 days 0:24:01.361
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 861ed7b0 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100711-85909-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Fri Oct  7 14:17:44.697 2011 (GMT-4)
System Uptime: 0 days 0:23:35.537
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 861f5588 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100711-104130-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Fri Oct  7 13:53:31.028 2011 (GMT-4)
System Uptime: 0 days 0:23:59.868
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 861e6d18 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100711-101556-01.dmp]
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Fri Oct  7 13:28:27.141 2011 (GMT-4)
System Uptime: 2 days 7:57:03.721
BUGCHECK_STR:  0xA0
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  wininit.exe
FAILURE_BUCKET_ID:  0xA0_nt!PopAllocateIrp+a0
Bugcheck code 000000A0
Arguments 00000001 00000006 85de73b8 00000000
BiosVersion = R01-A4
BiosReleaseDate = 09/20/2007
SystemManufacturer = Acer                 
SystemProductName = Aspire M1610
MaxSpeed:     1800
CurrentSpeed: 1800
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
by jcgriff2     
             
         J. C. Griffith, Microsoft MVP   
             
           https://mvp.support.microsoft.com/profile/Griffith   

           www.sysnative.com
             
           www.jcgriff2.com 

ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии

  
My System SpecsSystem Spec
08 Oct 2011   #6

Windows 7 ultimate 32bit
 
 

So I need to upgrade the bios but unplug and external devices? I have a internal additional hard drive - maybe it's that?

So it doesn't look virus related then?

Thanks again for your help! There was an update for logmein yesterday, I think it failed...
My System SpecsSystem Spec
08 Oct 2011   #7

Windows 7 - Vista
 
 

My pleasure.

Why do you think you may be infected? It's difficult from this end to tell if infection is present. I'll inquire here to see what you can run.

I suggested removing external devices because of the power policy manager failure. I'm not sure if this is hardware failure or not.

Why did LogMeIn install fail? Check these areas for additional crash info -

1. WERCON -
START | type view | "View all Problem Reports" | 2x-click on line item for additional crash info

2. Reliability Monitor -
START | type perfmon /rel

3. Event Viewer -
START | type eventvwr.msc | Custom Views | Administrative Events

Regards. . .

jcgriff2

`
My System SpecsSystem Spec
08 Oct 2011   #8

Windows 7 ultimate 32bit
 
 

Thanks Jeff, I updated bios and ran a few more anti virus checks to make sure and on restart it seems to have worked

Thanks again for your help much appreciated!
My System SpecsSystem Spec
08 Oct 2011   #9

Windows 7 - Vista
 
 

If not already done, I'd suggest that you run Malwarebytes. Instructions are from a Microsoft MVP, Security -
____________________________________________________________________________
____________________________________________________________________________

Please download Malwarebytes' Anti-Malware to your desktop.

  • Double-click mbam-setup.exe and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
  • If an update is found, it will download and install the latest version.
  • Once the program has loaded, be sure Quick scan is selected, then click Scan.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Be sure that everything is checked, EXCEPT items in System Restore as shown in this sample:
  • Click Remove Selected.
  • When disinfection is completed, a log will open in Notepad and you may be prompted to Restart. (See the Note below)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
  • Please post contents of that file in your next reply.
** Note **


If MBAM encounters a file that is difficult to remove, you will be presented with 1 of 2 prompts. Click OK to either and let MBAM proceed with the disinfection process. If asked to restart the computer, please do so immediately
____________________________________________________________________________
____________________________________________________________________________
Glad to hear BIOS update successful.

Regards. . .

John

My System SpecsSystem Spec
Reply

 Help with BS on shutdown




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 01:14 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33