Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD for a while now Fresh install and I get another one

08 Oct 2011   #1
bashcache

windows 7 x64
 
 
BSOD for a while now Fresh install and I get another one

First off I think it's my graphic card drivers that have been giving me problems so in a fresh install I hoped to fix that but I had one BSOD last night. I would be thankful if someone could have a quick look at my dumps. It says I'm not using a virus program in the file but I am using Microsoft Security Essentials and MalwareBytes.

Installed my Drivers in Driver Genius.

Operating System 64 bit Windows 7 Retail.

Using a Radeon Hd5670


Who Crashed gave me this.


This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF800031A7909, 0xFFFFF88003FE1A50, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.





My System SpecsSystem Spec
.
08 Oct 2011   #2
bashcache

windows 7 x64
 
 

Just had another BSOD whilst watching a Video on my pc.

On Sat 08/10/2011 13:06:44 GMT your computer crashed
crash dump file: C:\Windows\Minidump\100811-36613-01.dmp
uptime: 00:33:28
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x1A (0x41287, 0x0, 0x0, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
My System SpecsSystem Spec
08 Oct 2011   #3
jcgriff2

Windows 7 - Vista
 
 

Hi -

The 0x1a = memory management error & could be RAM. Run memtest86+ -
Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

0x3b could also be RAM, given the 0xc0000005 exception = memory access violation.

The 0xc..5 could also involve a rogue driver.

See if Driver Verifier flags a 3rd party driver - http://www.sysnative.com/0x1/Driver_Verifier.htm

Regards. . .

jcgriff2

`



BSOD SUMMARY
Code:
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\100811-40014-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Fri Oct  7 20:27:47.613 2011 (GMT-4)
System Uptime: 0 days 1:34:08.815
Probably caused by : ntkrnlmp.exe ( nt!CmpGetNameControlBlock+12e )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x3B
PROCESS_NAME:  CCleaner64.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!CmpGetNameControlBlock+12e
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`031a7909 fffff880`03fe1a50 00000000`00000000
BiosVersion = 0603   
BiosReleaseDate = 08/23/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
My System SpecsSystem Spec
.

08 Oct 2011   #4
bashcache

windows 7 x64
 
 

I will leave Memtest on overnight.


Thanks
My System SpecsSystem Spec
08 Oct 2011   #5
jcgriff2

Windows 7 - Vista
 
 

It needs to run 1 stick at a time; alternate the slots.

Regards. . .

jcgriff2

`
My System SpecsSystem Spec
12 Oct 2011   #6
bashcache

windows 7 x64
 
 

Hi

I ran the tests and Memtest comes back fine for both sticks individually. I have had a few Blue Screens since the weekend but not as many as I was getting. Last night it crashed whilst Verifier was running so I have uploaded the files and It would be great if someone could have a look at them.


Who Crashed gives me

On Wed 12/10/2011 02:41:41 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101211-35365-01.dmp
uptime: 1 day, 08:29:29
This was probably caused by the following module: ntfs.sys (Ntfs+0x5A88)
Bugcheck code: 0x24 (0x1904FB, 0xFFFFF8800A1C3718, 0xFFFFF8800A1C2F70, 0xFFFFF880012F1527)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


Cheers
My System SpecsSystem Spec
Reply

 BSOD for a while now Fresh install and I get another one




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - Fresh install
Hi, I have a Lenovo Windows 7 64bit Computer where I'm getting a BSOD. I've attached the file if someone can help me determine what is causing the crash. I uninstalled and reinstalled the software but I'm wondering if it has something to do with QuickBooks - I see there are error messages in...
BSOD Help and Support
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
BSOD after fresh install
I was instructed by the PC shop to re-install windows 7 after they were unable to find any hardware problems which were causing my system to BSOD or randomly reboot. Today I did a fresh install of Windows 7 Pro 64-bit, Office 2010 and install all important security updates. Within hrs of...
BSOD Help and Support
BSOD crashes after fresh install of 7 64bit install
Hello from a first timer here. I'm using HP pavilion DV7-1195nr, 4gig, 9600m gt 1gig. I had Vista 64bit Prem. that ran just fine, and I did the Win 7 Prem. upgrade. It seems to run smooth until I started getting bsod. I decided to do a full install of Win 7 Prem from my upgrade disc. I...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App