Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD during stress testing on new computer


10 Oct 2011   #1

Windows 7 Ultimate x64
 
 
BSOD during stress testing on new computer

I recently built a PC with the following Specs:
MOBO:P8P67 Deluxe 3.0 1850 BIOS
CPU:Intel Core i7-2600K
RAM:G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin SDRAM DDR3 1600 (PC3 12800)
Graphics cardsual EVGA GeForce GTX 570 HD Superclocked 1280 MB GDDR5 with SLI Link Enabled
PSU:Rosewill LIGHTNING 800W ATX12V/EPS12V
CPU cooler:Corsair Hydro Series H70 w/ 2 fans cooling liq
OS: Windows 7 Ultimate x64

I have experienced this before the stress test by playing games for several hours (6+) and at first I thought it was a heat issue. so I carefully began to watch the temps however my CPU never goes above 35c on load (19c idle), the video cards never seem to go above 50c, ram runs around 34c and mobo gives a temp of about 38c. no issue with heat.

I noticed that BCCode often referred to people coming back from hibernation or sleep however i can run the stress test on a clean boot and it will still fail.

BIOS is set to default setting with everything to auto. I have seen people talk about needing more power but i would assume even with dual video cards 800w power supply is adequate. is that possible?

This is a clean install from around 9/30 and all Drivers are up-to-date however i am using a beta bios according to asus. I moved up to it cause it says it improved system stability. Also i am using a beta driver from nvidia now as well, however before the update to this driver I was still getting this issue.

I am willing to give any info and am decently able to answer most questions about my build but this problem seems to escape me. Any help will be most graciously accepted. I am more than willing to experiment with settings and learn how to debug this issue if you have any guidance i would appreciate that as well.

See Attachments below for dump and PC health report.


My System SpecsSystem Spec
.

10 Oct 2011   #2

Windows 7 Ultimate 64bit SP1
 
 

Hi omnage welcome to SF


You need to update your,


Marvell MV91xx AHCI/RAID software\driver

Marvell - Support



Finish
with this steps and post back with any results.
My System SpecsSystem Spec
10 Oct 2011   #3

Windows 7 Ultimate x64
 
 

currently running prime95 test again to see if i get the fail. was reading that it could be a ram voltage problem and not being high enough. adding like .2 bring it from 1.34 to 1.5 or something. will do further research on that as well. will know about the driver failing in a second or so when it decides to drop. takes 15 or so minutes.
Edit: Ok so while i was waiting for the enevitable fail i went searching for drivers from a non asus site and found some re-running test. will have new update soon.
My System SpecsSystem Spec
.


10 Oct 2011   #4

Windows 7 Ultimate x64
 
 

Still nope help see attachment below. Dies without even showing a blue screen still.
My System SpecsSystem Spec
10 Oct 2011   #5

Windows 7 Ultimate 64bit SP1
 
 

Did you followed the step in my first reply?


Do you overclock anything?
My System SpecsSystem Spec
10 Oct 2011   #6

Windows 7 Ultimate x64
 
 

Yes current driver state for Marvell MV91xx AHCI/RAID driver is 1.2.0.1006.

No overclocking has been done. infact when i reinstalled windows i placed the bios back at default settings and ensured that nothing was overclock and it was set to normal/auto. i have yet to change anything.
My System SpecsSystem Spec
10 Oct 2011   #7

Windows 7 Ultimate 64bit SP1
 
 

The minidump you uploaded is exact the same.
My System SpecsSystem Spec
10 Oct 2011   #8

Windows 7 Ultimate x64
 
 

clearing logs and rerunning tests. will upload when done... not sure why it was exactly the same.. driver in device manager lists both sata and controller as 1.2.1006. otherwise same error is occurring as before.
My System SpecsSystem Spec
10 Oct 2011   #9

Windows 7 Ultimate x64
 
 

Ok well let me know where you see them at so i can look (which file do you find driver version numbers, maybe i missed one) or i can post a png of my device manager showing driver info... but i deleted the logs and re ran the test again, still failed, generated new reports and zipped them together.
My System SpecsSystem Spec
10 Oct 2011   #10

Windows 7 Ultimate x64
 
 

Here is where i stand. on this issue.
I have run the following test and they have all succeded
sandra CPU stress test - passed, no errors
Memtest86 - passed, no errors
prime95 small fft, passed for 22k no errors - ran for 5 hours

Next up is as follows
furmark
prime95 Inplace large ffts
sandra burn-in
- I do not expect to see an issue less it has something to do with power problems as i believe it might be a voltage regulation problem, any suggestions? I also noticed it occurrs when the ram and CPU are both being stressed. however i have yet to test the video cards.

Also during these tests no componant reach a temp higher than 38c. highest being during memtest86 which the ram did hit 37.6c. Temp is more than ok
My System SpecsSystem Spec
Reply

 BSOD during stress testing on new computer




Thread Tools



Similar help and support threads for2: BSOD during stress testing on new computer
Thread Forum
Solved BSOD while stress test and playing games BSOD Help and Support
ntkrnlmp.exe bsod / spontaneous rebooting under cpu stress BSOD Help and Support
Bsod during stress test 0xa BSOD Help and Support
Overclocking Stress Test BSOD? BSOD Help and Support
BSOD 124 only during gaming, not during stress test BSOD Help and Support
Memory management stress testing: Lol, I love 7 Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:32 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33