|12 Oct 2011||#1|
| || |
BSOD during Win7 install (IRQL_NOT_LESS_OR_EQUAL) error 0x0000000a
Never had any problems with WinXP. Tried to upgrade to Windows 7 64bit and during install I already get BSODs. Removed all memory modules and install could finish, but still occasionally get BSODs.
I have Corsair CM2X1024-6400 XMS6405v5.1 memory modules with an Asus P5N-E SLI motherboard (came bundled as these modules were recommended for the P5N-E).
I have set all BIOS settings to whatever others have recommended in the past for this mainboard, but still the BSODs occur. Here's the result of the CPU-Z validator:
CPU-Z Validator 3.1
Below the results of CPU-Z memory and SPD Slots (each slot same module and results).
I have also tried replacing memory with other modules, and I have tried using the default settings in the BIOS... no results
I tried also changing the timings to 4/4/4/13 and trc=15 (other than the default 5/5/5/18 and trc=22 or the 5/5/5/12 and trc=18 mentioned in other threads) but that makes it crash @ SP1 install too... it does seem more stable since changing it to 4/4/4/13...
If there could be a way to get it back to stable like it is with XP (my XP drive still works, and is stable, but for several reasons I now really need to switch to Windows 7)...
Also attached an example minidump and the BlueScreenView results of many others. They just points to ntoskernel.exe+705c0 so I still have no idea where to look...
Response much appreciated!
Is Windows 7 . . . -- YES - x86 (32-bit) or x64 ? -- x64 - the original installed OS on the system? -- XP, but Windows 7 install was on blank empty drive - an OEM or full retail version? -- Full Retail - What is the age of system (hardware)? -- 4 years (20/06/2007) - What is the age of OS installation (have you re-installed the OS?) -- 0 days
|My System Specs|
|12 Oct 2011||#2|
| || |
Also added the stuff mentioned in BSOD - Posting Instructions:
During running Windows_NT6_BSOD_jcgriff2 it rebooted, so I think I experienced one of it's many BSODs (even though I didn't see it).
And I also edited first post for the Basic System Spec (although it is already in my profile as well).
|My System Specs|
|Similar help and support threads for2: BSOD during Win7 install (IRQL_NOT_LESS_OR_EQUAL) error 0x0000000a|
|BSOD when trying to install Win7 64 on a new mobo, error 0x0000000A||BSOD Help and Support|
|IRQL_NOT_LESS_OR_EQUAL; Log In/Win7 Startup BSOD 0x0000000a||BSOD Help and Support|
|BSOD upon restart of PC error: 0X0000000A IRQL_NOT_LESS_OR_EQUAL||BSOD Help and Support|
|irql_not_less_or_equal BSOD, error 0x0000000A||BSOD Help and Support|
|New install WIN7 error IRQL_NOT_LESS_OR_EQUAL.||Installation & Setup|
|BSOD IRQL_NOT_LESS_OR_EQUAL error 0x0000000a||BSOD Help and Support|
|Win7 Install Error: BSOD IRQL_NOT_LESS_OR_EQUAL||BSOD Help and Support|