Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on clean install of windows 7 and windows update

21 Oct 2011   #1
simwalsh

Windows 7 64 Bit Home Premium
 
 
BSOD on clean install of windows 7 and windows update

Hi there,

Just bought an upgrade to RAM, graphics, processor and motherboard this week and have been having problems with it since.

I keep getting BSOD whether is be memory_management, NTFS.sys , or usbhub.sys. on clean installs on a range of new and old hard drives.

I have run memtest and is gave and error first time but haven't been able to replicate the error since.

System spec is currently:

Asus p8p67 LE
i5-2500K
Nvidia 8800GTS 640MB (haven't installed HD6850 yet)
4GB RAM Corsair XMS3 2x2GB CMX4GX3MA1600C9 xmp
Toughpower 650W
WD 640GB HDD/ 2TB EARS/2TB EAXS

attached is dump file. any ideas what is going wrong?


My System SpecsSystem Spec
.

21 Oct 2011   #2
panais

Windows 7 Ultimate 64bit SP1
 
 

Hi.

Run Disk Check
Check the Automatically fix file system errors box.
Check the Scan for and attempt recovery of bad sectors box

Run SFC /SCANNOW Command - System File Checker

Run RAM - Test with Memtest86+


Finish and post back with results.
My System SpecsSystem Spec
23 Oct 2011   #3
simwalsh

Windows 7 64 Bit Home Premium
 
 

Hi there,
Ran first test, no errors.
second, no errors.

ran memtest and had interesting results
1st Test: two sticks
Failed on test 6 pass 1
2nd test one stick in each channel
no errors
3rd test other stick in each channel
failed on each one
test 7 and test 8

so i'm guessing it's one stick of faulty RAM?
My System SpecsSystem Spec
.


23 Oct 2011   #4
Corazon

Windows 7 Professional SP1 32-bit
 
 

It would seem that way.

But may I ask, did you install a fresh copy of Windows after upgrading all your hardware or are you reusing an existing system?
My System SpecsSystem Spec
24 Oct 2011   #5
simwalsh

Windows 7 64 Bit Home Premium
 
 

I installed a fresh copy of windows on a range of hard drives and 32-bit and 64-bit versions ultimate and home premium.

I've sent the RAM back so hope the new sticks will work out better. The stick that does work has operated flawlessly on windows update etc.
My System SpecsSystem Spec
24 Oct 2011   #6
simwalsh

Windows 7 64 Bit Home Premium
 
 

Thanks for all your help @panais and @Corazon
My System SpecsSystem Spec
Reply

 BSOD on clean install of windows 7 and windows update




Thread Tools





Similar help and support threads
Thread Forum
BSOD during or right after Windows 7 clean install
Dear members, this is about PCs consisting of: Asus P9X79 PRO, BIOS 4607, Intel i7-3930k, Samsung SSD 830 (system/software), Samsung H204UI (data), AMD FirePro V4900, Windows 7 Professional 64bit The PCs have been self-built in 2011 and ran simulation software nearly 24/7 until April 2013,...
BSOD Help and Support
BSOD Windows 7 64-bit Clean Install
Hey I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest),HDD (windows),SSD(windows),GPU (Furmark) BSOD: 1. Running only windows update, no drivers or any other software installed. 2. Running windows update and using browser (Google Chrome), AV (Microsoft Security...
BSOD Help and Support
BSoD after clean install of Windows
Hello. I've had the BSoD twice now, both times while my system was sleeping. Something would wake it up, and then BSoD it. This has happened twice. I'm going to include both minidumps in the zip file for your perusal. Usually, I can figure out, and fix, what causes BSoDs, but not this one. Not when...
BSOD Help and Support
Windows 7 Clean Install BSOD
I just recently installed windows 7 on my hp tx1320us and it worked fine. I did the upgraded install and everything was great. But because it was a used computer, and it was running slow, I decided to reinstall with a custom/clean install. This worked ok but it wiped all my drivers including the...
BSOD Help and Support
BSOD After Clean Install of Windows 7
Hi: I hope you can help me solve my blue screen problem. My computer is an HP Pavilion a6242n which had a OEM Windows Vista installed. It has a AMD Athlon 64 x2 processor, 3072 mb Memory, 320 g Harddrive, dvd burner, Nvidia Geforce 6150 SE graphics card. The computer is 2 years old I did a...
BSOD Help and Support
BSOD Windows 7 RC 7100 x64 at Clean Install
hey guys! i just downloaded windows 7 rc x64. at first i wanted to upgrade from 7000, but after the first reboot i saw blue... (BSOD) :huh: then i thought, it would be better to do a clean install, burned the ISO on DVD and again saw BSOD even before installation progress has started (after...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App