Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD Black screen crash

21 Oct 2011   #1

Windows 7 Ultimate x64
 
 
BSOD Black screen crash

Hi

Someone who solved a similiar prob pls help me

I have a big prob with the pc, screen goes black and i cant do anything.
Must use the on/off botton to reboot it, when this happens the major prob comes.
No boot found on pc, pc wont boot then i go to the bios and the hd is not in there.
I must play with the pc restarting it and if im lucky the hd ''comes'' back and i can reboot and system starts. I can go check the event log to see the errors.
Several times now happened to that system was slow. It freeze and i cant do anything.
I tho i found a solution, i have read some theads with similiar probs
I did boot the pc in clean mood and deactive the half of the services. I was hoping this would help, but not even after 8 hours happened the same thing.
I have several errors in the log
*A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
*The Network Location Awareness service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
*The previous system shutdown at 13:03:22 on ‎2011-‎10-‎21 was unexpected.
*The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
I dont know if this happens when pc goes sleep or it was on many hours. This happens, in the screen settings there are no hibernate or sleep all options are on never, and no screen saver.
I tried another hd as bootdevice also coz i tho it was some prob with the hd but was the same prob with the other one also. I think this happens when i havent used the pc a long time but then the next question, why it doesnt find the boot on startup?
Im gettin upswet with it.
Help me guys

My System SpecsSystem Spec
24 Oct 2011   #2

Windows 7 Ultimate x64
 
 
Black screen help pls

someone out there who could help me?
My System SpecsSystem Spec
24 Oct 2011   #3

Windows 7 Professional x64
 
 

Hello,

First off, check your system temperatures with Speedfan, after it has been running a little while. If the temps are normal, run each of the three Prime95 tests, and watch for heat problems as well as errors.

Hardware - Stress Test With Prime95

Also, create a Memtest86 CD: RAM - Test with Memtest86+

When the computer crashes, immediately boot to the Memtest86 CD and run the test for about 30 minutes.
My System SpecsSystem Spec
.


25 Oct 2011   #4

Windows 7 Ultimate x64
 
 
testing speedfan

Quote   Quote: Originally Posted by Jonathan_King View Post
Hello,

First off, check your system temperatures with Speedfan, after it has been running a little while. If the temps are normal, run each of the three Prime95 tests, and watch for heat problems as well as errors.

www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

Also, create a Memtest86 CD: www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

When the computer crashes, immediately boot to the Memtest86 CD and run the test for about 30 minutes.


Hi Jonathan

Thanx for reply. I did run the prime95 about 10 hours or more.
I also did install speedfan. Here is some of it:
The GpU is on 52-54-55 so it has warn sign. I guess its too high.
Temp 1: 68-69
Temp 2: 40-41-42 they jump up and down. No warn but red
Temp 3: 128c
Hd0: 30 c

Im not sure about how the prime95 works, I have never done such things before.
I created a user account and try to follow the readme file.
i will now try the memtest.
I dont see any errors in prime95 when the prog is running.
Does it have some log files?
My System SpecsSystem Spec
25 Oct 2011   #5

Windows 7 Professional x64
 
 

I am unaware of any log files for Prime95. Just look at the status boxes during the tests, see if any workers stopped because they encountered an error.

You might also consider opening up the side of your case, cleaning out any dust with a can of compressed air ("electronics cleaner"), and then aiming a fan right at the motherboard while running Prime95. See if the temperatures in Speedfan decrease any.
My System SpecsSystem Spec
25 Oct 2011   #6

Windows 7 Ultimate x64
 
 

the temp is getting higher on gpu 60-61
when i use the pc.
anyway
I dont see any errors. I did clean the inside and the fans yesterday. i even did clean the power inside.
I get crazy. i will try all this memtests.
I think does temps are high, what do u think?
My System SpecsSystem Spec
25 Oct 2011   #7

Windows 7 Ultimate x64
 
 

can i run the stress test with this temps?
My System SpecsSystem Spec
25 Oct 2011   #8

Windows 7 Ultimate x64
 
 
stress test

Quote   Quote: Originally Posted by Jonathan_King View Post
Hello,

First off, check your system temperatures with Speedfan, after it has been running a little while. If the temps are normal, run each of the three Prime95 tests, and watch for heat problems as well as errors.

www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

Also, create a Memtest86 CD: www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

When the computer crashes, immediately boot to the Memtest86 CD and run the test for about 30 minutes.
Hi

The temps decrease when i have closed the prime95,
temp 1: 39 temp2 : 36 gpu: 59( still warn sign) How much should that be? what is normal for it?

Can i run the stress test with this temps?
My System SpecsSystem Spec
26 Oct 2011   #9

Windows 7 Professional x64
 
 

It looks like your temps are a little warm, but not too bad. You really shouldn't be having problems with those temps, but we've seen some strange things.

Still run the stress tests, and let us know if there are any errors.
My System SpecsSystem Spec
26 Oct 2011   #10

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
It looks like your temps are a little warm, but not too bad. You really shouldn't be having problems with those temps, but we've seen some strange things.

Still run the stress tests, and let us know if there are any errors.
oh yeah, i was running now the tourture test prime95 for some 4 hours or so,
and it happened again. Screen went black. Then it wont restart.
It just did the first display on restart adn nothing more.
SO i had to press reset, then ok,
I started the msi temperature and it was warning me, system will shut down gpu is 108
I was looking at it several times on the tourture test and temps was on 69-70 for hours.
temp 1 and temp 2 a little higher than yesterdays.
now what to do? I havent seen the error or anything in the test that was running coz i cant sit and watch the test nonstop. but atleast the other prog warned me for the gpu.
What should i do?
My System SpecsSystem Spec
Reply

 BSOD Black screen crash





Thread Tools



Similar help and support threads for2: BSOD Black screen crash
Thread Forum
Random Crash, Freeze, Black Screen or BSOD shortly after startup. BSOD Help and Support
BSOD Plannetside 2 (steam) black screen> reboot> BSOD crash report BSOD Help and Support
Solved Black screen crash & restarts, no BSOD BSOD Help and Support
Black Screen Crash in games, no BSOD. BSOD Help and Support
Random Black screen and crash BSOD Help and Support
Black screen crash BSOD Help and Support
Black Screen Crash BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:03 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33