BSOD multiple times with different errors


  1. Posts : 4
    windows 7 Ultimate x64
       #1

    BSOD multiple times with different errors


    Hi, been trying to fix my computer on my own by reading other people error messages that are the similar to mine. Finally got fed up and figured it couldn't hurt to post my own. I have seen 0x0000007E, 0x0000001A, 0x0000001E. I have updated the mouse and keyboard drivers. I have updated the video card drivers but one part keeps failing (i think its the C++ cause i already have it). Uninstalled the nightly build of VLC cause I thought that was the cause at one point. Any information would be a great help.

    Thanks.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    TresNight said:
    Hi, been trying to fix my computer on my own by reading other people error messages that are the similar to mine. Finally got fed up and figured it couldn't hurt to post my own. I have seen 0x0000007E, 0x0000001A, 0x0000001E. I have updated the mouse and keyboard drivers. I have updated the video card drivers but one part keeps failing (i think its the C++ cause i already have it). Uninstalled the nightly build of VLC cause I thought that was the cause at one point. Any information would be a great help.

    Thanks.
    Nothing direct but I am betting it is your Norton. I would remove and replace it with Microsoft Security essentials.

    http://us.norton.com/support/kb/web_...080710133834EN

    Virus, Spyware & Malware Protection | Microsoft Security Essentials



    I would also run these two tests

    These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.


    1-Memtest.

    *Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

    *Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.

    RAM - Test with Memtest86+



    2-Driver verifier

    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
    Driver Verifier - Enable and Disable
      My Computer


  3. Posts : 4
    windows 7 Ultimate x64
    Thread Starter
       #3

    So did the first test 8 passes no errors. will continue to try the driver verifier next. I did uninstall norton to see if that will do anything.
      My Computer


  4. Posts : 28,845
    Win 8 Release candidate 8400
       #4

    TresNight said:
    So did the first test 8 passes no errors. will continue to try the driver verifier next. I did uninstall norton to see if that will do anything.

    Sounds like a plan
      My Computer


  5. Posts : 4
    windows 7 Ultimate x64
    Thread Starter
       #5

    I started the driver verify but windows tries to start normally i consistently get the bsod error code 0x000000C9 (0x000000000000023E, 0xFFFFF88001704308, 0xFFFFF9800C15AEE, 0x0000000000000000). When I get into safe mode do I run my computer for 36 hours to stress the drivers? I am unclear as to what I am suppose to do once the computer crashes.
      My Computer


  6. Posts : 28,845
    Win 8 Release candidate 8400
       #6

    TresNight said:
    I started the driver verify but windows tries to start normally i consistently get the bsod error code 0x000000C9 (0x000000000000023E, 0xFFFFF88001704308, 0xFFFFF9800C15AEE, 0x0000000000000000). When I get into safe mode do I run my computer for 36 hours to stress the drivers? I am unclear as to what I am suppose to do once the computer crashes.

    Upload the dmp file created when it crashed


    We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

    The procedure:

    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
    *If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


    To ensure minidumps are enabled:

    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
      My Computer


  7. Posts : 4
    windows 7 Ultimate x64
    Thread Starter
       #7

    Well my F8 right now will only pull up the boot device option. For some odd reason my computer can't see the system restore that I made. So thanks for the help. Ill just wipe my raid and reload everything.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:48.
Find Us