Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: frequent BSOD after new processor install

24 Oct 2011   #1
maxamillion125

windows 7 64bit
 
 
frequent BSOD after new processor install

I went from a AMD phemom x2 550 BE (85 watt) to a AMD Phenom x6 1090T (125 watt). After flashing my motherboard and installing the new 1090T I'm getting constant BSOD's Could it be the extra 45 watts that the 1090T needs causing BSOD's?

Windows 7 64 bit
Zalman 500w
GTX 460
2 dvd drives
1 hd
AMD Phemon x6 1090T
4GB ddr2
Gigabyte GA-MA785G-UD3H


My System SpecsSystem Spec
.

24 Oct 2011   #2
maxamillion125

windows 7 64bit
 
 

Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Tue 10/25/2011 2:02:20 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102411-20155-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x1A (0x403, 0xFFFFF6800005C090, 0xF6A0000114467867, 0xFFFFF6000005C090)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Tue 10/25/2011 1:59:52 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102411-15896-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0xA (0xFFFFFA0005C9EA40, 0x7, 0x1, 0xFFFFF80003890BF3)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Mon 10/24/2011 11:02:56 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102411-16489-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x34 (0x50853, 0xFFFFF88003376528, 0xFFFFF88003375D80, 0xFFFFF8000391A690)
Error: CACHE_MANAGER
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a problem occurred in the file system's cache manager.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Mon 10/24/2011 10:42:30 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102411-16645-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x50 (0xFFFFF89E041E9978, 0x0, 0xFFFFF88013223D78, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Mon 10/24/2011 3:28:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102411-17206-01.dmp
This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x49CAC)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8801326BCAC, 0xFFFFF88008B401B0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\nvlddmkm.sys
product: NVIDIA Windows Kernel Mode Driver, Version 285.27
company: NVIDIA Corporation
description: NVIDIA Windows Kernel Mode Driver, Version 285.27
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 285.27 , NVIDIA Corporation).
Google query: nvlddmkm.sys NVIDIA Corporation SYSTEM_SERVICE_EXCEPTION




On Mon 10/24/2011 2:10:35 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102311-20592-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x50 (0xFFFFF8000BC4C9C0, 0x0, 0xFFFFF88004A2FD98, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
My System SpecsSystem Spec
25 Oct 2011   #3
Zer0K3wL

windows 7 sp1 x64
 
 

My System SpecsSystem Spec
.


25 Oct 2011   #4
maxamillion125

windows 7 64bit
 
 

Thanks, I tried all of those solutions and none worked. I'm still getting BSOD's. When I tried installing windows hot fix it said, The windows update is not applicable to your computer. Any other suggestions?
My System SpecsSystem Spec
26 Oct 2011   #5
maxamillion125

windows 7 64bit
 
 

Well, I think I figured it out. When I flashed my board it set my ram to 5- 5- 5- 15. It is supposed to be 4- 4- 4- 12. I made the changes and it hasn't BSOD yet......
My System SpecsSystem Spec
Reply

 frequent BSOD after new processor install




Thread Tools





Similar help and support threads
Thread Forum
Random BSOD after new processor install 000000007F
Hello all, I thought I'd breathe a few more years of life into my old 775 rig and install a new quad-core processor. Unfortunately, this has turned into a much bigger hassle than I expected. Long story short, currently I'm able to run for several hours, but then unexpectedly I'll get a BSOD...
BSOD Help and Support
Various/Frequent BSOD trying to install Audio Interfaces
Hello All, Over the last couple of weeks I've been attempting to connect and install two different audio interfaces. One was a Tascam US800 (which I gave up on and returned due to BSODs) After updating all drivers and the system bios, I tried to install a MOTU 800 which more often than not...
BSOD Help and Support
Frequent BSOD for various reasons on new 7 Install
Hello and thanks in advance for the help! I am in desperate need as I have a lot of work to do over the next week. Basically three years ago I built a computer, running XP, which served me well until a month ago when it became increasingly unreliable. It eventually wouldn't start at all until a...
BSOD Help and Support
Frequent BSOD after new OS/memory install
- Windows 7 Ultimate x64 Full retail version installed 2 months ago - XP original installed OS on the system ? - Full retail version - Dell D630 laptop 5 yrs old - 4GB memory from Crucial installed 2 months ago I've been having frequent BSODs after upgrading memory and installing Windows 7. ...
BSOD Help and Support
BSOD More frequent after new ram install
Hey guys, new here, found site through google :D I have a serious problem here, I bought this laptop less than 1 year ago at best buy. Its a Toshiba Satellite M645, Windows 7 home premium 64bit, 4gb ram (When i bought it), 500gb hdd, core i5 cpu. Ever since i bought it I've had BSOD's about...
BSOD Help and Support
Frequent BSOD after install of Windows 7
Hey there, I don't want to waste much of your time so I'll just list my issue: Installed windows 7 Pro 64bit Begun to have BSOD apparently caused by ntoskrnl.exe (About once a week) Didn't happen once when I was using XP 32bit Have tried updating drivers and uninstalling known incompatible...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App