Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x00000d1 about 5 hours apart


25 Oct 2011   #1

WINDOWS 7 PRO 64BIT
 
 
BSOD 0x00000d1 about 5 hours apart

Okay was having issues with vista freezing up so did a clean install formatted the drive and installed 7 pro 64 bit, then started installing accessories

I have 2 USB to Serial Adapters same type Gigaware that seem to be causing the problem

WHO crashed shows
System Information (local)
--------------------------------------------------------------------------------
computer name: BEAUCORNER-PC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 6433177600 total
VM: 2147352576, free: 1952710656

--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.

On Tue 10/25/2011 8:25:43 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\102511-27643-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0xD1 (0x8, 0x2, 0x0, 0xFFFFF88000EFC946)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

On Tue 10/25/2011 8:25:43 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: svk2pl64.sys (Svk2pl64+0x9A93)
Bugcheck code: 0xD1 (0x8, 0x2, 0x0, 0xFFFFF88000EFC946)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\svk2pl64.sys
product: Gigaware USB to Serial Cable
company: Gigaware
description: Gigaware USB to Serial Cable
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: svk2pl64.sys (Gigaware USB to Serial Cable, Gigaware).
Google query: svk2pl64.sys Gigaware DRIVER_IRQL_NOT_LESS_OR_EQUAL

It shows this each time over and over

Thanks Jason


My System SpecsSystem Spec
.

25 Oct 2011   #2

Windows 8.1 Pro x64
 
 

My System SpecsSystem Spec
25 Oct 2011   #3

Win 8 RP, Win 7, XP
 
 

Attaching more than one USB to Serial Adapter is maybe the problem.
If the OS is stable when there are no USB to Serial Adapters attached, try plugging in only one and see if OS is still stable.

You can search for an update of driver software from the manifacturer.

Are "USB to Serial" and a separate "Serial" device listed in device manager ? What is the serial device you are attaching to the cable ?
My System SpecsSystem Spec
.


25 Oct 2011   #4

WINDOWS 7 PRO 64BIT
 
 
Boyans Update

Boyans, I am attaching a weather station to each serial cord, in device manager there is just two entries under ports gigaware com 4 and gigaware com 5
My System SpecsSystem Spec
25 Oct 2011   #5

WINDOWS 7 PRO 64BIT
 
 

Quote   Quote: Originally Posted by yowanvista View Post

I have updated the driver to the newest thing I can find. How can i completely remove it and then try to reinstall it
My System SpecsSystem Spec
25 Oct 2011   #6

WINDOWS 7 PRO 64BIT
 
 

Added files above per posting insturctions
My System SpecsSystem Spec
25 Oct 2011   #7

Win 8 RP, Win 7, XP
 
 

Quote   Quote: Originally Posted by darnalljason View Post
Boyans, I am attaching a weather station to each serial cord, in device manager there is just two entries under ports gigaware com 4 and gigaware com 5
Do the weather station(s) come with some driver to install ?
The driver and adapter from Gigaware just transform the USB to a serial port - the device you attach to a serial port usually has a driver !

To uninstall a driver - in Device Manager select device, right click - select Uninstall.
My System SpecsSystem Spec
25 Oct 2011   #8

WINDOWS 7 PRO 64BIT
 
 

Quote   Quote: Originally Posted by boyans View Post
Quote   Quote: Originally Posted by darnalljason View Post
Boyans, I am attaching a weather station to each serial cord, in device manager there is just two entries under ports gigaware com 4 and gigaware com 5
Do the weather station(s) come with some driver to install ?
The driver and adapter from Gigaware just transform the USB to a serial port - the device you attach to a serial port usually has a driver !

To uninstall a driver - in Device Manager select device, right click - select Uninstall.

The weather station doesnt have a driver, I install a 3rd party application called virtual weather station that shows what the weather station is showing on the display on the computer screen in that software you just tell it what serial port and what speed, and then it shows up.
My System SpecsSystem Spec
25 Oct 2011   #9

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by darnalljason View Post
Quote   Quote: Originally Posted by yowanvista View Post

I have updated the driver to the newest thing I can find. How can i completely remove it and then try to reinstall it
You'll have to remove the software associated to this driver.
Dump files still blame Svk2pl64.sys, the Gigaware driver
The only fix to stop these BSODs would be to completely uninstall it
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88000efc946, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80001d16100
 0000000000000008 

CURRENT_IRQL:  2

FAULTING_IP: 
Wdf01000!imp_WdfObjectGetTypedContextWorker+1e
fffff880`00efc946 4c8b5110        mov     r10,qword ptr [rcx+10h]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  fffff880022469b0 -- (.trap 0xfffff880022469b0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffffffffffff8
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000efc946 rsp=fffff88002246b40 rbp=fffff88002246c58
 r8=fffff88005a15190  r9=0000057ff8a30a01 r10=fffffa8008680010
r11=00000000c0000120 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
Wdf01000!imp_WdfObjectGetTypedContextWorker+0x1e:
fffff880`00efc946 4c8b5110        mov     r10,qword ptr [rcx+10h] ds:d1a0:00000000`00000008=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80001ae31e9 to fffff80001ae3c40

STACK_TEXT:  
fffff880`02246868 fffff800`01ae31e9 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02246870 fffff800`01ae1e60 : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`075cf6f0 : nt!KiBugCheckDispatch+0x69
fffff880`022469b0 fffff880`00efc946 : 00000000`00000002 0000057f`f8a48458 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`02246b40 fffff880`05a09a93 : fffffa80`0772d1a0 0000057f`f8a30a98 00000000`00000001 0000057f`f8a30a01 : Wdf01000!imp_WdfObjectGetTypedContextWorker+0x1e
fffff880`02246b90 fffffa80`0772d1a0 : 0000057f`f8a30a98 00000000`00000001 0000057f`f8a30a01 fffffa80`0756d710 : Svk2pl64+0x9a93
fffff880`02246b98 0000057f`f8a30a98 : 00000000`00000001 0000057f`f8a30a01 fffffa80`0756d710 fffff880`05a08005 : 0xfffffa80`0772d1a0
fffff880`02246ba0 00000000`00000001 : 0000057f`f8a30a01 fffffa80`0756d710 fffff880`05a08005 fffff880`021e1040 : 0x57f`f8a30a98
fffff880`02246ba8 0000057f`f8a30a01 : fffffa80`0756d710 fffff880`05a08005 fffff880`021e1040 00000000`00000022 : 0x1
fffff880`02246bb0 fffffa80`0756d710 : fffff880`05a08005 fffff880`021e1040 00000000`00000022 00000000`00000001 : 0x57f`f8a30a01
fffff880`02246bb8 fffff880`05a08005 : fffff880`021e1040 00000000`00000022 00000000`00000001 00000000`00000000 : 0xfffffa80`0756d710
fffff880`02246bc0 fffff880`021e1040 : 00000000`00000022 00000000`00000001 00000000`00000000 fffffa80`0756d710 : Svk2pl64+0x8005
fffff880`02246bc8 00000000`00000022 : 00000000`00000001 00000000`00000000 fffffa80`0756d710 fffff880`05a07e51 : 0xfffff880`021e1040
fffff880`02246bd0 00000000`00000001 : 00000000`00000000 fffffa80`0756d710 fffff880`05a07e51 fffffa80`075cf6f0 : 0x22
fffff880`02246bd8 00000000`00000000 : fffffa80`0756d710 fffff880`05a07e51 fffffa80`075cf6f0 00000000`00000000 : 0x1


STACK_COMMAND:  kb

FOLLOWUP_IP: 
Svk2pl64+9a93
fffff880`05a09a93 ??              ???

SYMBOL_STACK_INDEX:  4

SYMBOL_NAME:  Svk2pl64+9a93

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Svk2pl64

IMAGE_NAME:  Svk2pl64.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4bb4512d

FAILURE_BUCKET_ID:  X64_0xD1_Svk2pl64+9a93

BUCKET_ID:  X64_0xD1_Svk2pl64+9a93

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD 0x00000d1 about 5 hours apart




Thread Tools



Similar help and support threads for2: BSOD 0x00000d1 about 5 hours apart
Thread Forum
BSOD Every 4 hours or so BSOD Help and Support
BSOD after shutdown, error 0x00000d1, shutdown not complete BSOD Help and Support
BSOD 0x00000D1 While playing Civ 5, DX11 only. BSOD Help and Support
BSOD playing SC2, error 0x00000d1 BSOD Help and Support
BSOD when computer is idle. No BSOD when playing games for hours. BSOD Help and Support
6 hours of Prime95 and 2.5 hours of OCCT. PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:59 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33