Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD during Macrium Image creation

04 Nov 2011   #31
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Pagefile changed to 4092MB

Re-ran torture test for an hour and all workers passed without errors.

CPU max temps nice and stable at:
Core0 57
Core1 52
Core2 54
Core3 54

I guess its DRAM up to 1.56v now?

Regards,
Golden


My System SpecsSystem Spec
.
04 Nov 2011   #32
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I had the same error about the swap file being too small on one core. I let it continue and it started.

Temps look good Colin, new thermal paste job?
My System SpecsSystem Spec
04 Nov 2011   #33
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Temps look good Colin, new thermal paste job?
New cooler mate.....Corsair H60 water colling kit. It comes with pre-installed film of thermal paste which makes it much easier.
My System SpecsSystem Spec
.

04 Nov 2011   #34
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Cool (pun intended) Colin. I've wondered it the Corsair H coolers are any good.
My System SpecsSystem Spec
05 Nov 2011   #35
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

If you passed the torture test, run your system at these setting for a while and see if you get a crash.
You might run memtest86+ again and see if it throws any errors.

If it passed the Prime95 torture test, it might be stable now.

Let us know if you get anymore crashes.
My System SpecsSystem Spec
05 Nov 2011   #36
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Appologies for jumping in your thread Colin.

Dave do those settings in Prime95 stressing the CPU or mostly RAM?
My System SpecsSystem Spec
05 Nov 2011   #37
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Thanks Dave.

Last night I increased DRAM = 1.560v, and also turned on the "Turbo" RAM performance mode, and then ran the torture test for 2 hours - all workers passed without errors.

Should I step DRAM back down again to 1.500v?

Regards,
Golden
My System SpecsSystem Spec
05 Nov 2011   #38
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Appologies for jumping in your thread Colin.

Dave do those settings in Prime95 stressing the CPU or mostly RAM?
It tests both in the 'Torture Test', the other tests are mostly for testing the CPU but some RAM is used there also.


Quote   Quote: Originally Posted by Golden View Post
Thanks Dave.

Last night I increased DRAM = 1.560v, and also turned on the "Turbo" RAM performance mode, and then ran the torture test for 2 hours - all workers passed without errors.

Should I step DRAM back down again to 1.500v?

Regards,
Golden
Yes.

Keep notes on the settings and results, for future reference.
My System SpecsSystem Spec
05 Nov 2011   #39
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by Dave76 View Post
Quote   Quote: Originally Posted by Britton30 View Post
Appologies for jumping in your thread Colin.

Dave do those settings in Prime95 stressing the CPU or mostly RAM?
It tests both in the 'Torture Test', the other tests are mostly for testing the CPU but some RAM is used there also.
Thanks!



Quote   Quote: Originally Posted by Dave76 View Post
Keep notes on the settings and results, for future reference.
Important, making mental notes (in my case) is like using disappearing ink.
My System SpecsSystem Spec
06 Nov 2011   #40
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Know the feeling


And, your welcome.
My System SpecsSystem Spec
Reply

 BSOD during Macrium Image creation




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System image/repair disc creation and use questions
Hello, * Before I begin I will add that I am aware of the excellent tutorials available here and will be using them =) * I need to migrate to a hard drive that already has windows 7 HP 64bit on it. I do not however want the registry information and all of the drivers and bloat-ware that...
Backup and Restore
Accessing Macrium Image
I'm in some pretty deep water right now. I made an image with macrium, but when I mount it as drive and try to access my user folders access is denied. Does anyone have any ideas on how I can access it? Let me know if you need more specific information.
Backup and Restore
Whats your SSD image creation time
Whats your SSD image creation time in GB/min or GB/sec Note: This thread is only intended to measure the "Performance" of how fast your SSD can create an image and nothing more, Any other questions should be posted in the Backup and Restore forum where they can be properly answered. With...
Performance & Maintenance
Image creation and restoration
I'm a long time user of Norton Ghost and Acronis TruImage for imaging my installations. Now that Windows has that capability I am wondering how it stacks up. Has anyone here used it to restore their entire system partition? Did it work ok for you? Other concerns: Does it allow you to have...
Performance & Maintenance
Backup and system image creation do not work
It seems a bit ridiculous to write about the subject. (soon I can say year after year) Microsoft is very well aware of this - and other related problems. Yet - no correction. Be it MS or Nokia, I give them all they deserve, here we go: I had this problem (error code 0x8078012D) with backup and...
Backup and Restore
System Image creation question
Hi all. Running a nice shiny new copy of win 7 home premium and have set about backing up the install. The system has two disks, both sata, a 230 GB basic disk for the OS and boot partitions and a 1TB dynamic for my data. When i try to create a system image of the system drive (C:) to a...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App