Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD ntoskrnl.exe 09f Driver_State_Power_Failure


30 Oct 2011   #1

Windows 7 Ultimate x64
 
 
BSOD ntoskrnl.exe 09f Driver_State_Power_Failure

Just built a new system and it intermittently BSOD's only happens when I'm not around.

Here are my computer specifications:

Intel Core i5-2500K 3.3GHz (Stock clock)
Gigabyte GA-Z68XP-UD4
16GB GSKILL Sniper Series 8GB PC3-12800
ASUS ENGTX560 Ti DCII/2DI/1GD5
ANTEC True Power Quattro 850 Watt
Seagate ST3250410AS (250GB)
Seagate ST3320613AS (320GB)

What BlueScreenView shows.

Code:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

DRIVER_POWER_STATE_FAILURE

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x1000009f (0x0000000000000004, 0x0000000000000258, 0xfffffa800ca8a680, 
0xfffff80000b9c3d0)

*** ntoskrnl.exe - Address 0xfffff800030924da base at 0xfffff80003013000 DateStamp 
0x4e02aaa3
I did a bit of hunting and some say it could be "Intel's Rapid Storage Technology" I had initially used the driver that came with the Motherboard but I updated from Intels website so far so good but I'm no expert in the area of debugging so I thought I would come and post my mini dump here to see what other's can figure out that I can't.

http://cl.ly/2d3v2E0y1c1y1t1M2g2K/103011-19515-01.zip



There's the link to my dump file.

My System SpecsSystem Spec
.

30 Oct 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by defektion View Post
Just built a new system and it intermittently BSOD's only happens when I'm not around.

Here are my computer specifications:

Intel Core i5-2500K 3.3GHz (Stock clock)
Gigabyte GA-Z68XP-UD4
16GB GSKILL Sniper Series 8GB PC3-12800
ASUS ENGTX560 Ti DCII/2DI/1GD5
ANTEC True Power Quattro 850 Watt
Seagate ST3250410AS (250GB)
Seagate ST3320613AS (320GB)

What BlueScreenView shows.

Code:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

DRIVER_POWER_STATE_FAILURE

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x1000009f (0x0000000000000004, 0x0000000000000258, 0xfffffa800ca8a680, 
0xfffff80000b9c3d0)

*** ntoskrnl.exe - Address 0xfffff800030924da base at 0xfffff80003013000 DateStamp 
0x4e02aaa3
I did a bit of hunting and some say it could be "Intel's Rapid Storage Technology" I had initially used the driver that came with the Motherboard but I updated from Intels website so far so good but I'm no expert in the area of debugging so I thought I would come and post my mini dump here to see what other's can figure out that I can't.

http://cl.ly/2d3v2E0y1c1y1t1M2g2K/103011-19515-01.zip



There's the link to my dump file.
With only one DMP file to work with it is almost impossible to id. If you have more upload them.. i can tell you the active module at the time of the crash was Related to EtronHub3.sys eXtensible Hub Driver. from Etron Technology Inc

I would re-install the newest version available.
My System SpecsSystem Spec
30 Oct 2011   #3

Windows 7 Ultimate x64
 
 

yeah it happens intermittently if it's more frequent I'll post more!

EDIT: Thanks for your help too! That was quick! I updated the Etron driver so we'll see if this works.
My System SpecsSystem Spec
.


30 Oct 2011   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by defektion View Post
yeah it happens intermittently if it's more frequent I'll post more!

EDIT: Thanks for your help too! That was quick! I updated the Etron driver so we'll see if this works.

Good luck and let us know if you need help

K
My System SpecsSystem Spec
Reply

 BSOD ntoskrnl.exe 09f Driver_State_Power_Failure




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:35 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33