Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: It takes about 30 minute logon process and randomly freezes and crash

31 Oct 2011   #1

Windows 7 Ultimate 32 bit OS Version: 6_1_7600 Service Pack: 0_0
 
 
It takes about 30 minute logon process and randomly freezes and crash

Hi all,

Everything was fine in my Windows 7 Ultimate 32 bit OS, one day it started working with crashes and I end up with new formatting and reinstalling OS. But after that the crashes and errors rested. The simbtoms are:

1. It takes about 30 minutes the OS logon process, after that sometimes it crashes and I get BSOD

2. When it logs on it freezes randomly, and after I get explorer not responfing error

3. Windows has recovered from unexcepted error (really I don't remember the correct name of error)

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: c5
BCP1: 0E000000
BCP2: 00000002
BCP3: 00000000
BCP4: 83160795
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103111-24055-01.dmp
C:\Windows\Temp\WER-29218-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Event viewer logs:

Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.

DETAIL - The configuration registry database is corrupt.
for C:\Users\Default.Default-PC\AppData\Local\Microsoft\Windows\\UsrClass.dat

Windows cannot load classes registry file.
DETAIL - The configuration registry database is corrupt.


The device, \Device\Harddisk0\DR0, has a bad block.

Data error on device.

Device: \Device\RaidPort0
Model: ST9500325AS
Firmware Version: 0003
Serial Number: 6VECZ629
Port: 0


I have done:

1. sfc /scannow

2. chkdsk /r /f

3. Tried to scan hard drive with software DTI Surface Scanner, and end up read error cycleing.

I attached the screens of my OS errors , from EventViewer Logs and from cmd and MINIDUMP FILES.

After this all I have the same state of OS with the same errors. I will appreicate for your help.

thanx guys!


My System SpecsSystem Spec
.

31 Oct 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hayk View Post
Hi all,

Everything was fine in my Windows 7 Ultimate 32 bit OS, one day it started working with crashes and I end up with new formatting and reinstalling OS. But after that the crashes and errors rested. The simbtoms are:

1. It takes about 30 minutes the OS logon process, after that sometimes it crashes and I get BSOD

2. When it logs on it freezes randomly, and after I get explorer not responfing error

3. Windows has recovered from unexcepted error (really I don't remember the correct name of error)

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: c5
BCP1: 0E000000
BCP2: 00000002
BCP3: 00000000
BCP4: 83160795
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103111-24055-01.dmp
C:\Windows\Temp\WER-29218-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Event viewer logs:

Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.

DETAIL - The configuration registry database is corrupt.
for C:\Users\Default.Default-PC\AppData\Local\Microsoft\Windows\\UsrClass.dat

Windows cannot load classes registry file.
DETAIL - The configuration registry database is corrupt.


The device, \Device\Harddisk0\DR0, has a bad block.

Data error on device.

Device: \Device\RaidPort0
Model: ST9500325AS
Firmware Version: 0003
Serial Number: 6VECZ629
Port: 0


I have done:

1. sfc /scannow

2. chkdsk /r /f

3. Tried to scan hard drive with software DTI Surface Scanner, and end up read error cycleing.

I attached the screens of my OS errors , from EventViewer Logs and from cmd and MINIDUMP FILES.

After this all I have the same state of OS with the same errors. I will appreicate for your help.

thanx guys!
1-SFC reports errors it could not fix. Repair install

2-chkdsk reports bad blocks repaired

3-DMP's show memory exceptions



please run these

These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.


1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
31 Oct 2011   #3

Windows 7 Ultimate 32 bit OS Version: 6_1_7600 Service Pack: 0_0
 
 

zigzag3143,

Thank you very much for your quick replay... I downloaded end installed DriverScanner as you mentioned in the begining of your post, so it found some new drivers for my devices, I updated them... and I am going to test my OS a few days for to make sure these changes fixed the problem or not, if no I will continue to follow next step you adviced.... thanx again!
My System SpecsSystem Spec
.


01 Nov 2011   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hayk View Post
zigzag3143,

Thank you very much for your quick replay... I downloaded end installed DriverScanner as you mentioned in the begining of your post, so it found some new drivers for my devices, I updated them... and I am going to test my OS a few days for to make sure these changes fixed the problem or not, if no I will continue to follow next step you adviced.... thanx again!
I dont recommend driver scanner nor any other scanner type app. I recommend you go the mfr's site manually and get them. They are usually newer.,
My System SpecsSystem Spec
Reply

 It takes about 30 minute logon process and randomly freezes and crash




Thread Tools



Similar help and support threads for2: It takes about 30 minute logon process and randomly freezes and crash
Thread Forum
No crash, everything just freezes for about a minute, then resumes? General Discussion
Stored Word Document takes one Minute to close Why? Microsoft Office
How to send user to logon screen after 15 minute idle? Customization
windows 7 64 bit home premium startup takes a minute to load General Discussion
mouse takes 1 minute to start after boot Hardware & Devices
One minute freezes BSOD Help and Support
anyone know how to delay auto logon a minute or two Customization

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:43 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33