Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No pattern BSOD, also in safe mode - New Build - limited info :/


31 Oct 2011   #1

Windows 7 Home Premium 64bit
 
 
No pattern BSOD, also in safe mode - New Build - limited info :/

Hi guys,

first time poster, long time lurker. Very recently built a new system, and now experiencing BSOD, frustrating as i was super-happy with the build process. Unfortunately, i can't provide too much information as the pc even bsod's in safe-mode, and i can't get on long enough to get much info. Just managed to, hopefully, get the whole jcgriff2 thingy,attached here.

have reinstalled twice, and get the same BSOD soon after login, regardless of activity. as mentioned, i also get it in safe mode. My initial idea of culprits is mobo or SSD disk, but quite the novice here and very much asking for help. will update here with any info i can get, here's hoping

the BSOD message reads interrupt Exception Not handeled.

My System SpecsSystem Spec
.

31 Oct 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by keyboardcat View Post
Hi guys,

first time poster, long time lurker. Very recently built a new system, and now experiencing BSOD, frustrating as i was super-happy with the build process. Unfortunately, i can't provide too much information as the pc even bsod's in safe-mode, and i can't get on long enough to get much info. Just managed to, hopefully, get the whole jcgriff2 thingy,attached here.

have reinstalled twice, and get the same BSOD soon after login, regardless of activity. as mentioned, i also get it in safe mode. My initial idea of culprits is mobo or SSD disk, but quite the novice here and very much asking for help. will update here with any info i can get, here's hoping

the BSOD message reads interrupt Exception Not handeled.
All of these were Related to mv91xx.sys magni Windows Driver from Marvell Semiconductor, Inc. I would re-install newest driver available.
My System SpecsSystem Spec
01 Nov 2011   #3

Windows 7 Home Premium 64bit
 
 

brilliant, will give that a try when i get home today. Any tips on, ahem, how to do it? I normally get BSOD within a few minutes of logging on, is there a file i can have ready on a thumb drive or something to speed up the process?

Have also attached the minidump here in case further info is needed.
My System SpecsSystem Spec
.


01 Nov 2011   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by keyboardcat View Post
brilliant, will give that a try when i get home today. Any tips on, ahem, how to do it? I normally get BSOD within a few minutes of logging on, is there a file i can have ready on a thumb drive or something to speed up the process?

Have also attached the minidump here in case further info is needed.

Still the same cause mv91xx.sys
My System SpecsSystem Spec
02 Nov 2011   #5

Windows 7 Home Premium 64bit
 
 

downloaded latest drivers from Marvell drivers , thought i'd get this in here in case people have the same issues, worked a treat. marked as solved
My System SpecsSystem Spec
Reply

 No pattern BSOD, also in safe mode - New Build - limited info :/




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:45 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33