Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Internet disconnects then CPU lagspikes,try to shutdown and I get BSOD

02 Nov 2011   #1
Bobbeh123

Windows 7 Home Premium 64bit
 
 
Internet disconnects then CPU lagspikes,try to shutdown and I get BSOD

Hello all, two times since I got this new computer it has ended up Bluescreening.

I have noticed that during both of these times, my internet stops working. A process (which i believe relates to my Ralink Wireless LAN Card) called "svchost.exe" takes a lot of memory and the service name is "wudfsvc". Then I check the performance tab and my CPU's performance spikes 25-40% constantly. Then, the only time I receive the bluescreen is when I try to shut down my computer (if my cpu usage isn't spiking and I do have access to the internet, it shuts down fine and normal, it is only during this weird random event that I get bluescreen trying to shut down). I had installed drivers for my videocard, but that is about it. I did NOT install any drivers relating to my LAN card.

Please note that this occurs randomly and that particular service is always running at 150k memory usage. However, the only time I get this bluescreen is when the CPU usage starts to spike, my internet goes down and I try to shut down my computer.

Upon restarting my computer if this happens, it gets stuck on the splashscreen. So I end up turning it off completely and doing a normal boot up and the computer works perfectly fine.

ALIENWARE AURORA R3

i5-2400 3.10 ghz
radeon 6950

Is Windows 7 . . .
- x64
- Windows 7
- OEM
- 2 week old computer


My System SpecsSystem Spec
.
02 Nov 2011   #2
Veniathan

Windows 7 Ultimate x64
 
 

You should not worry about svchost.exe

It's a system file, it usualy does indeed use alot of memory. Shutting it down will lead to instability.

So its not the problem, other then that. I do not know honestly ..
My System SpecsSystem Spec
02 Nov 2011   #3
Bobbeh123

Windows 7 Home Premium 64bit
 
 

So is this a unfixable BSOD?
My System SpecsSystem Spec
.

02 Nov 2011   #4
Jonathan_King

Windows 7 Professional x64
 
 

Hello,

It seems there may be some malware on your system:
Code:
Event[749]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2011-10-31T20:29:31.000
  Event ID: 1116
  Task: N/A
  Level: Warning
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Brett-PC
  Description: 
Microsoft Antimalware has detected malware or other potentially unwanted software.
 For more information please see the following:
http://go.microsoft.com/fwlink/?linkid=37020&name=HackTool:Win32/Keygen&threatid=2147593794
     Name: HackTool:Win32/Keygen
     ID: 2147593794
     Severity: Medium
     Category: Tool
     Path: file:_C:\$Recycle.Bin\S-0-0-00-0000000000-1697062364-0000000000-0000\$R41NBWJ.exe;file:_C:\Users\Brett\AppData\Local\Temp\Rar$DR94.456\Malwarebytes Anti-Malware 1.50.1.1100\Keygen MBAM.1.50 and later (FFF)\w00t.exe;file:_C:\Users\Brett\Desktop\w00t.exe
     Detection Origin: Local machine
     Detection Type: Concrete
     Detection Source: Real-Time Protection
     User: Brett-PC\Brett
     Process Name: C:\Program Files (x86)\SUPERAntiSpyware\SUPERAntiSpyware.exe
     Signature Version: AV: 1.115.963.0, AS: 1.115.963.0, NIS: 10.7.0.0
     Engine Version: AM: 1.1.7801.0, NIS: 2.0.7707.0
Run a scan with Malwarebytes, and also run a Full Scan with MSE.

Install the latest Realtek ethernet drivers from here: 218.210.127.131/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

Code:
Rt64win7.sys    Mon Mar 22 05:57:14 2010 (4BA73EFA)
Code:
Event[1527]:
  Log Name: System
  Source: RTL8167
  Date: 2011-10-30T15:54:01.078
  Event ID: 1
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Brett-PC
  Description: 
Realtek PCIe GBE Family Controller is disconnected from network.
Run the McAfee removal tools shown here: service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100507

Other than that, start on some hardware tests. Run each of the three Prime95 tests: Hardware - Stress Test With Prime95

...Summary of the dumps:
Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Oct 25 23:14:07.979 2011 (UTC - 4:00)
System Uptime: 0 days 1:06:51.228
*** WARNING: Unable to verify timestamp for btmusb.sys
*** ERROR: Module load completed but symbols could not be loaded for btmusb.sys
*** WARNING: Unable to verify timestamp for usbhub.sys
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_usbhub.sys
BiosReleaseDate = 05/25/2011
SystemProductName = Aurora-R3
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Nov  1 23:59:08.360 2011 (UTC - 4:00)
System Uptime: 0 days 9:56:46.609
*** WARNING: Unable to verify timestamp for usbhub.sys
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
Probably caused by : usbhub.sys ( usbhub+12a60 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xFE
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xFE_usbhub+12a60
BiosReleaseDate = 05/25/2011
SystemProductName = Aurora-R3
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
My System SpecsSystem Spec
02 Nov 2011   #5
Bobbeh123

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Hello,

It seems there may be some malware on your system:
Code:
Event[749]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2011-10-31T20:29:31.000
  Event ID: 1116
  Task: N/A
  Level: Warning
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Brett-PC
  Description: 
Microsoft Antimalware has detected malware or other potentially unwanted software.
 For more information please see the following:
http://go.microsoft.com/fwlink/?linkid=37020&name=HackTool:Win32/Keygen&threatid=2147593794
     Name: HackTool:Win32/Keygen
     ID: 2147593794
     Severity: Medium
     Category: Tool
     Path: file:_C:\$Recycle.Bin\S-0-0-00-0000000000-1697062364-0000000000-0000\$R41NBWJ.exe;file:_C:\Users\Brett\AppData\Local\Temp\Rar$DR94.456\Malwarebytes Anti-Malware 1.50.1.1100\Keygen MBAM.1.50 and later (FFF)\w00t.exe;file:_C:\Users\Brett\Desktop\w00t.exe
     Detection Origin: Local machine
     Detection Type: Concrete
     Detection Source: Real-Time Protection
     User: Brett-PC\Brett
     Process Name: C:\Program Files (x86)\SUPERAntiSpyware\SUPERAntiSpyware.exe
     Signature Version: AV: 1.115.963.0, AS: 1.115.963.0, NIS: 10.7.0.0
     Engine Version: AM: 1.1.7801.0, NIS: 2.0.7707.0
Run a scan with Malwarebytes, and also run a Full Scan with MSE.

Install the latest Realtek ethernet drivers from here: 218.210.127.131/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

Code:
Rt64win7.sys    Mon Mar 22 05:57:14 2010 (4BA73EFA)
Code:
Event[1527]:
  Log Name: System
  Source: RTL8167
  Date: 2011-10-30T15:54:01.078
  Event ID: 1
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Brett-PC
  Description: 
Realtek PCIe GBE Family Controller is disconnected from network.
Run the McAfee removal tools shown here: service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100507

Other than that, start on some hardware tests. Run each of the three Prime95 tests: Hardware - Stress Test With Prime95

...Summary of the dumps:
Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Oct 25 23:14:07.979 2011 (UTC - 4:00)
System Uptime: 0 days 1:06:51.228
*** WARNING: Unable to verify timestamp for btmusb.sys
*** ERROR: Module load completed but symbols could not be loaded for btmusb.sys
*** WARNING: Unable to verify timestamp for usbhub.sys
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_usbhub.sys
BiosReleaseDate = 05/25/2011
SystemProductName = Aurora-R3
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Nov  1 23:59:08.360 2011 (UTC - 4:00)
System Uptime: 0 days 9:56:46.609
*** WARNING: Unable to verify timestamp for usbhub.sys
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
Probably caused by : usbhub.sys ( usbhub+12a60 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xFE
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xFE_usbhub+12a60
BiosReleaseDate = 05/25/2011
SystemProductName = Aurora-R3
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
-malwarebytes removed the malware.
-the system is stable (i ran before i left for work)
I installed the ethernet drivers. Should I uninstall my old Ralink drivers now? The only problem if I do that is I won't have wifi access??


Lastly, what do I do about "DRIVER_POWER_STATE_FAILURE", will the ethernet drivers fix both of my BSODs?
My System SpecsSystem Spec
03 Nov 2011   #6
Jonathan_King

Windows 7 Professional x64
 
 

The only thing I notice that might suggest an issue with your Ralink card is the usbhub.sys bugcheck. Given that your Ralink card is USB, there might be some correlation.

If the BSODs persist, try unplugging the wireless adapter for a few days, see if it makes a difference. You could also try just uninstalling the drivers and letting Windows reinstall some compatible ones. You should still have wireless access, but perhaps lost some functionality such as Wake on Lan and power savings.
My System SpecsSystem Spec
07 Nov 2011   #7
Bobbeh123

Windows 7 Home Premium 64bit
 
 

alright well.. i seem to have persisting BSODs. i've had one since the last two. It is caused by "ntoskrnl.exe" but I'm not sure what the problem is EXACTLY. Here is how/when it happens: I attempt to shut down the computer and it hangs on "Shutting down" and ends up BSODing after a while. Then it restarts and hangs on splashscreen until eventually I have to do a hard reset. This only happens rarely because sometimes I can shut down just fine. Please help, i'd love to shut down my computer every day without the fear of a BSOD

btw, the wireless adapter isn't USB.
My System SpecsSystem Spec
09 Nov 2011   #8
Bobbeh123

Windows 7 Home Premium 64bit
 
 

I still need help with this problem I posted the BSOD files above.
My System SpecsSystem Spec
09 Nov 2011   #9
Jonathan_King

Windows 7 Professional x64
 
 

Are you aware that your Officejet printer is disabled? If you're not using it, disconnect it completely. For that matter, disconnect all USB devices that aren't essential to the basic usage of the computer.

Also, uninstall AlienRespawn, as it seems to be hanging:
Code:
Event[794]:
  Log Name: System
  Source: Service Control Manager
  Date: 2011-11-06T14:31:26.661
  Event ID: 7011
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Brett-PC
  Description: 
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SftService service.
Finally, if that fails, we should resort to standard software troubleshooting methods, non-BSOD-specific. Try a selective startup: Run Selective Startup using System Configuration

...Summary of the dumps:
Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Nov  7 18:55:29.157 2011 (UTC - 5:00)
System Uptime: 0 days 3:49:36.406
Probably caused by : usbehci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_usbehci.sys
BiosReleaseDate = 05/25/2011
SystemProductName = Aurora-R3
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
My System SpecsSystem Spec
09 Nov 2011   #10
Bobbeh123

Windows 7 Home Premium 64bit
 
 

Thanks, I've been having printer issues before.. so this could very well be the case. Also, ending the Alienrespawn process has allowed me to shut down my computer successfully before. Thanks!!

I'll get back to you if it still persists. (I completely disconnected the printer, although I still have my xbox 360 controller hooked up along with a webcam)

EDIT: I uninstalled ALL of my network adapters and restarted my computer. It just reinstalled them, so hopefully that will solve my problems? I have no idea at this point because I've tried new drivers already. Also, I have unplugged all USB devices from the computer.
My System SpecsSystem Spec
Reply

 Internet disconnects then CPU lagspikes,try to shutdown and I get BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Internet disconnects for a second
Hello, I just got a new computer and I'm having internet problems. I used to use an old XP desktop with direct connection and it stayed connected, used my vista laptop with direct connection and it stayed connected, and now with my new W7 desktop the internet does not stay connected. It just...
Network & Sharing
Internet Disconnects
So heres the deal. Ive recently upgraded from windows XP 32 bit to Windows 7 64bit, this ofcourse means Ive formatted my harddrives and made a clean install. But now Ive realised, that whenever I try to download a large file which takes several minutes, my computer will disconnect from the router...
Network & Sharing
Wireless Internet Disconnects
Hi I put Windows 7 Pro 64bit on my computer about 2 weeks ago and I'm using a Belkin wireless USB adaptor to connect to the Internet. I am connecting via Windows and NOT a 3rd party utility. Some days the wireless connection is solid, but the majority of the time, the wireless drops and I...
Network & Sharing
Internet disconnects for no reason
My Internet connection can go for days with no problem and then for half a day will disconnect every few minutes. The strange thing is that all I have to do to get it back is to disconnect the cable from my computer and reconnect it and in seconds I have Internet again. My internet provider cannot...
Network & Sharing
Lagspikes on internet
Hi I dont know why, but i get 3-4 lagspikes every 30 seconds when surfing on the internet.. No sort of lag spikes if i do anything thats not internet related.. have Acer Aspire 5930G
Network & Sharing
VPN disconnects INTERNET
Hi, I am using CISCO Anyconnect. But regardless of what VPN, what happens is that connecting to VPN disconnects me from Internet which doesnot happen with XP. Is there a solution for this with anyone, please.
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 23:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App