Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: My fix for resolving issue where dual layer DVD burning fails

02 Nov 2011   #1
starwhite

Windows 7 Ultimate x32
 
 
My fix for resolving issue where dual layer DVD burning fails

I was unable to burn any dual layer DVD media. I went into log and error message informed me that I had a corrupt AC3 codec. I simply downloaded a new codec and installed it. Problem solved.


My System SpecsSystem Spec
.
02 Nov 2011   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by starwhite View Post
I was unable to burn any dual layer DVD media. I went into log and error message informed me that I had a corrupt AC3 codec. I simply downloaded a new codec and installed it. Problem solved.
Thanks for sharing your solution. Really appreciate it
My System SpecsSystem Spec
02 Nov 2011   #3
starwhite

Windows 7 Ultimate x32
 
 

You're welcome. I have had this problem for awhile, I am sorry I did not give error code, but I have done much research on the web. You'd be surprised at how many people have lost the ability to burn dual layer discs in Windows vista and Seven. 4.7 GB disks are unaffected. Very few solutions. Also while burning its a good idea to temporarily disable your antivirus! Speeds the process up more than you would believe! Here is the error copied from Windows 7 event viewer. Program I used to burn with is Cyberlink's Power2go. But burning dual layer failed in DVDFab, Imgburn as well.

Faulting application name: Power2Go.exe, version: 7.0.0.1906, time stamp: 0x4e146c31
Faulting module name: ac3filter.ax_unloaded, version: 0.0.0.0, time stamp: 0x48747189
Exception code: 0xc0000005
Fault offset: 0x089386c0
Faulting process id: 0xcc4
Faulting application start time: 0x01cc990e9132b747
Faulting application path: C:\Program Files\CyberLink\Power2Go\Power2Go.exe
Faulting module path: ac3filter.ax
My System SpecsSystem Spec
.

Reply

 My fix for resolving issue where dual layer DVD burning fails




Thread Tools




Similar help and support threads
Thread Forum
Burning Dual Layer DVDs - DVD+RW & Software
All-- Not sure that I'm posting in the right forum...but: Is there anyone out there who has experience with the burning (dual layer) of DVDs using DVD+RW media? Should the DVD+RWs support dual layer? I have two (stock) LG GH22NS50 ATA drives that claim to support dual layer burning? What...
Music, Pictures & Video
W7 not reading Dual Layer disk
My machine needed a new mother board and so I upgraded to W7 from Vista, same Optical and hard drives installed. I burned files in a dual layer disk in Vista as backup. Now having upgraded the PC to Windows 7, Windows manager lists all the sub directories and the files but then only opens...
Drivers
How to know if your CD/DVD is Dual-Layer compatible
My drive is this: Tsstcorp cddvdw ts-l633b ata device I have no idea if it is able to burn dual-layer discs. How can I find out if it is able to? I have googled it without any results. /Ocek
Hardware & Devices
Dual Layer DVD burning in 7 Pro
Hi all, new to the forums. Has anyone encountered any issues with Dual Layer DVD burning in Windows 7 Professional 32bit? Since moving from XP, I have been unable to do so. I have tried using Imgburn, Clonecd, and have tried swapping DVD drives with another machine...in all cases it's ended in a...
Hardware & Devices
Windows 7 DVD-R Dual Layer Discs Burning Failures Fix.
Source - Windows 7 DVD-R Dual Layer Discs Burning Failures Fix - Available from Microsoft - Softpedia
Software
Burning fails in Windows 7
I've tried Nero 8 &9, cdburnerXP, Roxio, Ashampoo and "every" disc fails to burn using these programs. On the otherhand Imgburn works fine. I'm running Windows 7 Professional and had Ultimate running with the same outcome. Latest version with all updates. It's as if anything that doens't burn in...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App