Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Same BSOD everytime - Page fault in non-paged area


05 Nov 2011   #1

Windows 7 Home 64bit
 
 
Same BSOD everytime - Page fault in non-paged area

As above

lately i have been getting quite a number of BSODs, even though there were no hardware changes.

error code : 0x00000050

according to the bluescreenviewer, it was caused by ntoskrnl.exe & ntfs.sys

took out my rams, cleaned the 'golden' area. makes no difference

attached is the dump file

any help much appreciated

thanks !!


My System SpecsSystem Spec
.

06 Nov 2011   #2

Windows 7 Home 64bit
 
 

help?
My System SpecsSystem Spec
06 Nov 2011   #3

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by enrell View Post
As above

lately i have been getting quite a number of BSODs, even though there were no hardware changes.

error code : 0x00000050

according to the bluescreenviewer, it was caused by ntoskrnl.exe & ntfs.sys

took out my rams, cleaned the 'golden' area. makes no difference

attached is the dump file

any help much appreciated

thanks !!

We need more than one DMP to spot a trend as to its cause if you have more upload them.
My System SpecsSystem Spec
.


06 Nov 2011   #4

Windows 7 Home 64bit
 
 

uploaded 3 more..
My System SpecsSystem Spec
06 Nov 2011   #5

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by enrell View Post
uploaded 3 more..

These crashes were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.



1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+



2-Driver verifier


Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
11 Nov 2011   #6

Windows 7 Home 64bit
 
 

hi there

ran 7 passes with memtest with no errors detected

going to try the driver verifier now
My System SpecsSystem Spec
12 Nov 2011   #7

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by enrell View Post
hi there

ran 7 passes with memtest with no errors detected

going to try the driver verifier now



Good luck
My System SpecsSystem Spec
Reply

 Same BSOD everytime - Page fault in non-paged area




Thread Tools



Similar help and support threads for2: Same BSOD everytime - Page fault in non-paged area
Thread Forum
Solved Page fault in non paged area - BSOD BSOD Help and Support
BSOD Page Fault in non Paged Area BSOD Help and Support
BSOD - Page Fault in Non Paged Area BSOD Help and Support
Bsod ci.dll page fault in a non paged area BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:30 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33