Quote: Originally Posted by suman1300
I have a problem suddenly in my computer. My computer has two hard disk drives(500 gb each) and in both h/disk Windows 7 ulti. 64 bit installed(in one trial version). But recently I have a mysteries problem. Suddenly one of my h.disk failed to boot and shows no h disk available... and that time i installed a copy of Windows 7 in another hdisk and found the disk no 1 not accessible. I installed a data reco soft. to recover data from hd 1 and only at that time the hd-1 was accessible. After that I format the hd-1 and clean install Windows 7 ulti 64 bit. It was working fine few days. But one day it shows a blue screen of death. Then again I boot the machine with hd-2.... shut down the pc.....restart and then found the hd-1 one was again accessible. But shows the following error " Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
OS Version: 6_1_7600
Service Pack: 0_0
Files that help describe the problem:
Read our privacy statement online:
If the online privacy statement is not available, please read our privacy statement offline:
My question is why the hd shows blue screen of death repeatedly? Is any prob. due to installation of Windows 7 in both hd? kindly help me.
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.