Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Getting from IDE to ACHI without BSOD

12 Nov 2011   #1
killbox

Windows 7 enterprise 64bit
 
 
Getting from IDE to ACHI without BSOD

Hi guys, I'm having problem getting from IDE mode to ACHI. I had the achi mode working in the first place, but I had to do a repair install due to some bad drivers, and now it's back to IDE mode again.

I've tried to change the achi in regedit to 0, where it was and then change to achi mode in bios, but then I get a bsod. Any suggestions?


My System SpecsSystem Spec
.

13 Nov 2011   #2
killbox

Windows 7 enterprise 64bit
 
 

I've tried setting it to 1 in regedit as well without success. I've gotten mails from sevenforums with replys, but they down show up here :/
My System SpecsSystem Spec
21 Nov 2011   #3
killbox

Windows 7 enterprise 64bit
 
 

I got it to work by choosing raid in bios.
My System SpecsSystem Spec
.


Reply

 Getting from IDE to ACHI without BSOD




Thread Tools





Similar help and support threads
Thread Forum
ACHI or IDE for new SSD installation
Hi all, I just got done installing an SSD in my older PC with Windows 7 64bit OS. Before installing the SSD I went into Bios and set it to ACHI mode, because I have read that is the best for SSD performance. However, I still have my old Windows XP installation on the HDD installed in my PC and...
Hardware & Devices
Achi vs ide
I think one of my hdds is failing and tried to run Seagate tools for Dos that I downloaded from Seagate's site and burned to a cd. The cd loads, but says "no devices recognized." I called Seagate and they said to change to Ide in the BIOS. In researching online, many people are saying...
Performance & Maintenance
BSOD often since moving from IDE to ACHI
Had numerous BSOD's since updating from IDE to ACHI using the upgrade tool from the MSoft website. Enabled verifier.exe earlier and rebooted - immediately a BSOD with a message about a rogue driver - please update your driver but did not state which one. Managed to reboot to disable the verifer...
BSOD Help and Support
Do I need to install a driver for ACHI?
Hi guys. I got all the hardware for my new build and since I will be using a SSD, I will need to turn on ACHI. It's my first time with it. Always been on IDE before. So, my main question is : Do I need to install a driver? Does Windows come with one? My secondary question is : Will it...
Drivers
ACHI Problems
Okay, my system is accurate under my profile...so on with my question. Thanks again to this forum, it has been a lifesaver! I just got the Corsair 800D case. One of the features is the Hot Swappable drive bays in the front. I thought I had previously enabled AHCI but I enabled AHCI for the...
Hardware & Devices
achi driver for ga-p35-ds3
I saw this topic by crispy Thred 7 http://www.sevenforums.com/drivers/43049-gigabyte-ga-p35-ds3-raid-driver.html sine then gigabyte have released these drivers for SATA GIGABYTE GA-P35-DS3 (Rev. 1.0) | Emaplaadid - Driver
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App