Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue screen help!

12 Nov 2011   #1
opelrsx

win7 home premium 64bit
 
 
Blue screen help! new dmp file attached

First post, seeking for help on blue screen

BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8800525EF66
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


AMD-A6-3650 APU with Radeon HD graphic
8GB memory
500G HDD
Win7 home premium 64bit


My System SpecsSystem Spec
.
12 Nov 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by opelrsx View Post
First post, seeking for help on blue screen

BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8800525EF66
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


AMD-A6-3650 APU with Radeon HD graphic
8GB memory
500G HDD
Win7 home premium 64bit

These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.


1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.
RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
13 Nov 2011   #3
opelrsx

win7 home premium 64bit
 
 

verifier turned on, blue screen again

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80002ADF0F3
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
My System SpecsSystem Spec
.

13 Nov 2011   #4
opelrsx

win7 home premium 64bit
 
 

My System SpecsSystem Spec
13 Nov 2011   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by opelrsx View Post

Did you run memtest and verifier?
My System SpecsSystem Spec
13 Nov 2011   #6
opelrsx

win7 home premium 64bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by opelrsx View Post

Did you run memtest and verifier?
Yes I did.

memtest reports no error.

Turned verifier on, had 2 blue screen so far
My System SpecsSystem Spec
13 Nov 2011   #7
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by opelrsx View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by opelrsx View Post

Did you run memtest and verifier?
Yes I did.

memtest reports no error.

Turned verifier on, had 2 blue screen so far
Upload the verifier DMP's
My System SpecsSystem Spec
13 Nov 2011   #8
opelrsx

win7 home premium 64bit
 
 

Here is the complete folder.. thank you!!
My System SpecsSystem Spec
14 Nov 2011   #9
opelrsx

win7 home premium 64bit
 
 

still need help, thanks!!
My System SpecsSystem Spec
14 Nov 2011   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by opelrsx View Post
Here is the complete folder.. thank you!!



Best advice that I've seen about this error (from here: http://www.sevenforums.com/crashes-d...tml#post356791 )
Quote:
What you're looking for will be in one of the following categories:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)
So, check the drivers
Then check the inside of the case (temperature, voltage, dust, etc).
Then run some hardware stress tests

Quote:
Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Try this free stress test: Free Software - GIMPS
Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.
Then try replacing parts.
Then look up the versions of your BIOS to see what changes were done.
My System SpecsSystem Spec
Reply

 Blue screen help!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Unable to start - black screen or empty blue screen w cursor??
Hello, My laptop will not boot. I end up with an empty black screen or a blue screen with no icons, just a cursor. I get choices for 'normal startup' or ' repair' but not safe mode. Any help appreciated.
General Discussion
Geforce 7300 LE - Blue screen of death - Multiple lines down screen.
Today I booted my computer up to be promoted with a black screen, I gave it a good half an hour before forcing it to shutdown, to which when I booted it back up. Was then promoted with a blue screen about the video card not being able to lead, that happened twice. I then booted it into safe...
Graphic Cards
Blue Screen Error but no actual blue screen pops up
While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to...
BSOD Help and Support
Blue Screen out of the Blue, Was working fine for 9+ hours then c...
Well i had my computer on all day since i woke up @ 8 in the morning gaming and what not. It had finally crashed on me while i was playing dirt 2 a couple of mins ago. I had fixed all my previouse blue screen problems by not using any AMD OverDrive Settings for my Radeon HD 4850. My specs...
BSOD Help and Support
Help with blue screen auto reboot, Stop: 0x0000007B error screen
Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App