Blue screen help!

Page 1 of 3 123 LastLast

  1. Posts : 17
    win7 home premium 64bit
       #1

    Blue screen help! new dmp file attached


    First post, seeking for help on blue screen

    BCCode: 1e
    BCP1: FFFFFFFFC0000005
    BCP2: FFFFF8800525EF66
    BCP3: 0000000000000000
    BCP4: FFFFFFFFFFFFFFFF
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1


    AMD-A6-3650 APU with Radeon HD graphic
    8GB memory
    500G HDD
    Win7 home premium 64bit
    Last edited by opelrsx; 13 Nov 2011 at 13:29.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    opelrsx said:
    First post, seeking for help on blue screen

    BCCode: 1e
    BCP1: FFFFFFFFC0000005
    BCP2: FFFFF8800525EF66
    BCP3: 0000000000000000
    BCP4: FFFFFFFFFFFFFFFF
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1


    AMD-A6-3650 APU with Radeon HD graphic
    8GB memory
    500G HDD
    Win7 home premium 64bit

    These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.


    1-Memtest.
    *Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

    *Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.
    RAM - Test with Memtest86+



    2-Driver verifier

    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
    Driver Verifier - Enable and Disable
      My Computer


  3. Posts : 17
    win7 home premium 64bit
    Thread Starter
       #3

    verifier turned on, blue screen again

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 4105

    Additional information about the problem:
    BCCode: a
    BCP1: 0000000000000000
    BCP2: 0000000000000002
    BCP3: 0000000000000001
    BCP4: FFFFF80002ADF0F3
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1
      My Computer


  4. Posts : 17
    win7 home premium 64bit
    Thread Starter
       #4

      My Computer


  5. Posts : 28,845
    Win 8 Release candidate 8400
       #5

    opelrsx said:

    Did you run memtest and verifier?
      My Computer


  6. Posts : 17
    win7 home premium 64bit
    Thread Starter
       #6

    zigzag3143 said:
    opelrsx said:

    Did you run memtest and verifier?
    Yes I did.

    memtest reports no error.

    Turned verifier on, had 2 blue screen so far
      My Computer


  7. Posts : 28,845
    Win 8 Release candidate 8400
       #7

    opelrsx said:
    zigzag3143 said:
    opelrsx said:

    Did you run memtest and verifier?
    Yes I did.

    memtest reports no error.

    Turned verifier on, had 2 blue screen so far
    Upload the verifier DMP's
      My Computer


  8. Posts : 17
    win7 home premium 64bit
    Thread Starter
       #8

    Here is the complete folder.. thank you!!
      My Computer


  9. Posts : 17
    win7 home premium 64bit
    Thread Starter
       #9

    still need help, thanks!!
      My Computer


  10. Posts : 28,845
    Win 8 Release candidate 8400
       #10

    opelrsx said:
    Here is the complete folder.. thank you!!



    Best advice that I've seen about this error (from here: https://www.sevenforums.com/crashes-d...tml#post356791 )
    What you're looking for will be in one of the following categories:

    a) BIOS bug
    b) a driver whose activity is causing the target processor to lock up
    c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)
    So, check the drivers
    Then check the inside of the case (temperature, voltage, dust, etc).
    Then run some hardware stress tests

    Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
    Try this free stress test: Free Software - GIMPS
    Prime95 Setup:
    - extract the contents of the zip file to a location of your choice
    - double click on the executable file
    - select "Just stress testing"
    - select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
    - "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
    The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
    Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
    The Test selection box and the stress.txt file describes what components that the program stresses.
    Then try replacing parts.
    Then look up the versions of your BIOS to see what changes were done.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:33.
Find Us