Cant Get into windows automatic BSOD

vierasniper · 14 Nov 2011

hey guys its been a while, but im afraid i have to ask too much of you guys. I recently bought several upgrades to jump on the z68 chipset. I got 2500k, 8 gigs of Ripjaws, and a P8Z68 V-Pro Motherboard. I was able to install everything perfectly without a hitch, the mobo recognized all 8 gigs and the speed and the i5 as well. The one thing im having problems with is getting into windows. i have connected my sata for my boot drive into all the sata controllers on the board with no success. The drive is recognized with my old and the new sata cables but when it start loading in crashes into BSOD. anyone have seen or know anything about my case? any help is of course appreciated and thnkas in advanced. i'll gladly offer any more information if needed.

play2mefish · 14 Nov 2011

So what your telling us is, I upgraded my old system with a newer MB and now the system will not start? IF that is the case, then that is why Windows is not starting. You might install your Windows Sestup disc and run the repair option to see if it will resolve your problem. But most likely you will need to do a complete reinstall. So make a backup of your data files before you do anything else.

vierasniper · 14 Nov 2011

in laymans terms yes. let me see if i can give the repair disk a whirl.

if it helps the error code im getting is 0x0000007b

vierasniper · 15 Nov 2011

I'd hate to double post but I'm having no luck with the repair disc. I also tried to get the dump files but my performance report crashes and it doesn't specify why. I'd really like to avoid a back up and reinstall. I don't have a set up disk since it's OEM, I do have a repair if they're the same.

My Evo sent this on its own.

vierasniper · 16 Nov 2011

Nobody at all?

My Evo sent this on its own.