BSOD Playing Skyrim and Idle, various errors

Hi Guys,

I am by no means a computer expert so please bear with me here. I recently purchased all the necessary parts for my new computer and had it built by a friend who has done various builds for me in the past. I have been getting frequent BSODs. At first I thought it was related entirely to Skyrim, but I have also had a BSOD while burning a DVD and at idle. My system specs are as follows:

Intel i5 2500k
Asus P8Z68-V
Asus Gtx 570
8gb Corsair Vegeance LP 1600mhz 2x4
Corsair Series 3 90GB SSD
Thermaltake TR2 1200Watt PS
Windows 7 Ultimate 64x

It is a retail version of Windows and everything is brand new.

I have done the following:

Malware test using Malwarebyte's Anti-Malware and have found nothing.
Uniblue DriverScanner is showing all drivers up to date.
I ran Prime95 and had no issues (temps stayed normal)
I ran FurMarks and had no issues (again normal temps)
I ran MemTest and the RAM passed without issue.
I used HD Tune on the SSD and there also did not appear to be any problems.
I have disabled Avira AV and still have the BSOD
I updated the firmware on my SSD
I updated by bios
I have installed, uninstalled, and reinstalled by GFX drivers.

Nothing appears to be working and I would really like to get this issue resolved as soon as possible. Fortunately, since I just bought the parts at a local computer store I can return them for a direct swap if one of the parts is the issue.

I have attached the memory dumps. Hopefully a .RAR is okay.

Thanks in advance for all the help.

Appears to be related to your OS

Please run a system file check to verify and repair it

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

It may need to be run up to three times before sucessful

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.

Hello,

The SFC scan returned errors and it says were fixed. I ran the scan again to be sure, and no errors were found the second time through. If the BSOD returns I will post the report log from the SFC. If not, then thank you very much!

BSOD happened again. I guess that wasnt enough.

I've zipped the report from the SFC and also attached my .dmp. I have never seen a .dmp that looks like this.

Hopefully there is another fix.

Cogburn said:

BSOD happened again. I guess that wasnt enough.

I've zipped the report from the SFC and also attached my .dmp. I have never seen a .dmp that looks like this.

Hopefully there is another fix.

The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error.

A- CHKDSK /R /F:

Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.


B- Elevated Command Prompt:

Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"


C-CHKDSK LogFile:

Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter

Expand the Windows logs heading, then select the Application log file entry.

Double click on the Source column header.

Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).

Copy/paste the results into your next post.