Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSODs after installing Windows 7 x64 RTM

17 Nov 2011   #1
vrosa

Windows 10 Build 9926
 
 
BSODs after installing Windows 7 x64 RTM

As far as I could see the most usual BSODs are:
IRQ_NOT_EQUAL_OR_LESS
PFI_LIST_NOT_FOUND.

Windows 7 x64 RTM (7600)
Intel C2D E6300 @ 1.86 GHz
4GB of Corsair DDR2 800 @ 667 (2x2GB)
MOBO Gygabyte 945GM-S2
HD WD Server Series (quite old)

The DMP Files are attached.

Plz help me !


My System SpecsSystem Spec
.
17 Nov 2011   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

Hello vrosa

These crashes were caused by memory corruption.

> Run these two tests to verify your memory and find which driver is causing the problem.


1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.


Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.


Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+


2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .


Then, here's the procedure:

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).


If you can't get into Windows because it crashes too soon, try it in Safe Mode.

If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
17 Nov 2011   #3
vrosa

Windows 10 Build 9926
 
 

Thanks alot JMH
My System SpecsSystem Spec
.

Reply

 BSODs after installing Windows 7 x64 RTM




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSODs after installing Windows 7 x64 onto new SSD
So I built my computer about 5 years ago and it ran pretty solidly with Windows XP and then Windows 7 Professional x32 until recently. I bought a SSD and installed Windows 7 x64 on it, whilst keeping the original Windows 7 Professional x32 on a HDD. After a short while I began to get BSODs...
BSOD Help and Support
Random BSODs since installing new SSD
Recently I upgraded my motherboard, cpu and after that my SSD. I first reinstalled Win7 on a freshly formatted drive and had no problems for a week. Last week I got a 250GB Samsung 840 EVO and promptly wiped the old HDD and reinstalled on the SSD. I downloaded a fresh set of drivers from Asus to...
BSOD Help and Support
BSODs since installing new GPU
Hello all, Ever since I upgraded from an AMD 6950 to AMD 7970 (Gigabyte) I've been getting not only random "video driver has failed and successfully recovered" messages, but also BSODs. None have happened while playing games, ironically, but while doing non-computer intensive tasks such as...
BSOD Help and Support
BSODs after installing HD 6770
Hi All, Iíve come across a series of BSODs since installing my new HD 6770. A bit of googling came up with results indicating a a history of BSODs with the card. Below are the specs of my computer. CPU: AMD Phenom II X4 940 Black Edition MB: ASUS M4A78-E DDR2 Motherboard RAM: Corsair...
BSOD Help and Support
Bsods after installing windows 7
OS Windows 7 Ultimate SP1 x64 CPU Amd Phenom B50 Quad Core 3,2 Ghz Memory 6 GB RAM DDR 3 1337 Ghz Graphics Card HIS Ati Radeon HD 5670 1GB GDDR 5
BSOD Help and Support
random BSODs after installing GFX
My friend has installed an 8800gts with thermalright heatsink. Now, he tells me that he gets BSOD (IRQL not less or equal, Memory Management dump, software hardware change) while playing games like Alien Breed Impact, Crysis and Pandora Tomorrow (which for a few days ran ok)...his and my config is...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App