Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD only after using LAN cable cat.5e

21 Nov 2011   #11
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

For complete secure install:

i) Find your driver here, save it to your desktop
ii) Download Driver sweeper, for the leftover files
iii) Uninstall your driver from the Control Panel
iv) While rebooting, go into safe-mode without internet (tip: plugout your LAN cable or disconnect wireless)
v) Run Driver Sweeper, click all the Nvidia components and analyse them
vi) Clean them all
vii) Head into Windows, without internet
viii) Install the Driver from the desktop

On the newest dump:

Delete your Agnitum Firewall Driver software. If you're having trouble finding an actual Anti-virus and firewall, use MSSE, and enable Windows Firewall with it.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800188d9dc, fffff880041d83a8, fffff880041d7c00}

Unable to load image \SystemRoot\system32\DRIVERS\afwcore.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afwcore.sys
*** ERROR: Module load completed but symbols could not be loaded for afwcore.sys
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )
Fairly easy.

Fred.


My System SpecsSystem Spec
.
22 Nov 2011   #12
Rosa

Windows 7 Home Premium 64bit
 
 

Should I select the newest NVIDIA driver or should I select an older version (which older version)?
My anti-virus program is Bullguard, should I delete that?
My System SpecsSystem Spec
22 Nov 2011   #13
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Quote   Quote: Originally Posted by Rosa View Post
Should I select the newest NVIDIA driver or should I select an older version (which older version)?
My anti-virus program is Bullguard, should I delete that?
Try an older one.

On the antivirus, just keep it, but make sure you get rid of Agnitum Firewall.

Fred.
My System SpecsSystem Spec
.

22 Nov 2011   #14
panais

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by FredeGail View Post
Quote   Quote: Originally Posted by Rosa View Post
Should I select the newest NVIDIA driver or should I select an older version (which older version)?
My anti-virus program is Bullguard, should I delete that?
Try an older one.

On the antivirus, just keep it, but make sure you get rid of Agnitum Firewall.

Fred.
I totally agree with FredeGail onthis ""get rid of Agnitum Firewall""
My System SpecsSystem Spec
22 Nov 2011   #15
Rosa

Windows 7 Home Premium 64bit
 
 

I've searched for Agnetum, but I can't find it on my computer. I don't think it's there, anyway I'm gonna try and follow these steps:

Quote:
i) Find your driver here, save it to your desktop
ii) Download Driver sweeper, for the leftover files
iii) Uninstall your driver from the Control Panel
iv) While rebooting, go into safe-mode without internet (tip: plugout your LAN cable or disconnect wireless)
v) Run Driver Sweeper, click all the Nvidia components and analyse them
vi) Clean them all
vii) Head into Windows, without internet
viii) Install the Driver from the desktop
hope it helps
My System SpecsSystem Spec
22 Nov 2011   #16
Rosa

Windows 7 Home Premium 64bit
 
 

Sorry forgot the attachment.
My System SpecsSystem Spec
22 Nov 2011   #17
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

I just figured that, that firewall is a part of the Bullgard.

Head here and download the uninstaller.

Run it, and then download MSSE

Hope this helps.
Fred.
My System SpecsSystem Spec
22 Nov 2011   #18
Rosa

Windows 7 Home Premium 64bit
 
 

Well I just finished and it works. Knock on wood I hope it stays like this!! Thank you all so much and I'll keep u posted.
My System SpecsSystem Spec
23 Nov 2011   #19
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Quote   Quote: Originally Posted by Rosa View Post
Well I just finished and it works. Knock on wood I hope it stays like this!! Thank you all so much and I'll keep u posted.
This should do the job.
You're welcome.

Fred.
My System SpecsSystem Spec
30 Nov 2011   #20
Rosa

Windows 7 Home Premium 64bit
 
 

Everything was fine for a couple of days, and now this again! Please help........... again
My System SpecsSystem Spec
Reply

 BSOD only after using LAN cable cat.5e




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Difference between Audio Cable and Aux Cable
Hello I have a quick question! what is the difference between Audio Cable and Aux Cable? Is there any difference in sound quality or in Left Right Channel Sound? I'm asking because I recently bought Edifier C2 2.1ch Sound System for my PC that has an External Amplifier that has Aux Input as well....
Sound & Audio
BSOD when connecting TV via HDMI cable
Whenever I try to connect my computer to my tv it ends up with a BSOD. Ive tried the basic dumb stuff with no success. Can someone please help me. Thanks
BSOD Help and Support
Will this cable work to extend coaxial cable for cable box?
Getting a new TV and placing it in a different spot than where the old TV is and I realized the coaxial cable coming from the wall isn't going to reach the new location for cable box's "Cable IN" connection. Can I use this as an extension? It looks right to me but I just want to be sure.
Chillout Room
Digital Cable Advisor fails, can't install cable card. . . why?
http://img198.imageshack.us/img198/83/cableadvisor.png Uploaded with ImageShack.us http://img51.imageshack.us/img51/4821/playreadfail.png Uploaded with ImageShack.us HD Radeon 6870 Graphics card
Media Center
Network Cable Unplugged error: cable is plugged in
Hello, Since last night, my LAN connection has been giving me the error "Network cable unplugged." I have tried swapping the cable with another, swapping the ports on the router, restarting the router, power cycling the router, turning off the router and my computer and then turning them back...
Network & Sharing
Network cable unplugged message when using ethernet cable
Hi, I have a brand new Dell Precision Workstation with Windows 7 Professional 64 bit. I have not been able to connect to networks or the internet. It does not recognize that it is plugged into the network/internet via an ethernet cable. The computer has a Broadcom NetLink Gigabit Ethernet adapter...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App