BSOD on reboot/sd


  1. spotlight
    Posts : 3
    Windows 7 Home Premium 64 bit
       New #1

    BSOD on reboot/sd


    Hi, i have just upgraded my computer, and have installed a fresh copy of Windows 7 HP x64. Problem is i get a BSOD on every reboot or shut-down. Making it hard to install any further windows updates.

    My specs are:
    KINGSTON HYPERX 120GB SSD
    KINGSTON DDR3 HYPERX 8GB 1600MHZ CL9 (2X4GB)
    INTEL CORE I5 2500K
    GIGABYTE GA-Z68X-UD3H-B3
    GeForce 8800 GTS

    Hard drives are not set up in raid, i have activated ahci in bios, and upgraded my firmware on the ssd disk.

    Running out of ideas here now, any help would be apreciated!
    1. attachment for dump files and perfomon.
      My Computer
    Quote Quote

  3. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #2

    spotlight said:
    Hi, i have just upgraded my computer, and have installed a fresh copy of Windows 7 HP x64. Problem is i get a BSOD on every reboot or shut-down. Making it hard to install any further windows updates.

    My specs are:
    KINGSTON HYPERX 120GB SSD
    KINGSTON DDR3 HYPERX 8GB 1600MHZ CL9 (2X4GB)
    INTEL CORE I5 2500K
    GIGABYTE GA-Z68X-UD3H-B3
    GeForce 8800 GTS

    Hard drives are not set up in raid, i have activated ahci in bios, and upgraded my firmware on the ssd disk.

    Running out of ideas here now, any help would be apreciated!
    1. attachment for dump files and perfomon.
    These were all Related to AppleChargerSrv.exe Apple Charger FOR iPhone, iPad, and iPod from Giga-Byte Technology

    I would remove it as it isnt necessary. Usb will charge it just fine

    I would also DL the update readiness tool and update to SP-1



    Ensure you install the correct 64 or 32bit option for your system)
    Download the System Update Readiness Tool (64bit)
    Download the System Update Readiness Tool (32bit)

    ISC Diary | Windows 7 / 2008 R2 Service Pack 1 Problems

    links courtesy jmh
      My Computer
    Quote Quote

  4. spotlight
    Posts : 3
    Windows 7 Home Premium 64 bit
    Thread Starter
       New #3

    Worked like a charm!
    Thanks m8
      My Computer
    Quote Quote

  6. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #4

    spotlight said:
    Worked like a charm!
    Thanks m8
    Glad to see you are working. Let us know if it acts up.
      My Computer
    Quote Quote

 

  Related Discussions
From time to time, I temporarily disable my NIC by going to "Network and Sharing Center" -> "Change adapter settings" -> (select LAN adapter) -> "Disable". I do this to prevent any network access to one of my computers for a while. When I'm done, I re-enable the NIC and most of the time,...
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 2057 Additional information about the problem: BCCode: 116 BCP1: FFFFFA8010C69010 BCP2: FFFFF880069CD6AC BCP3: FFFFFFFFC000009A
- x64; - the original installed OS on the system: Windows 7 fresh install; - full retail version; - What is the age of system (hardware): less than one year; - What is the age of OS installation: less than three months. Hello, this morning my elitebook 8540w suddenly rebooted and during...
I purchased my HP Compaq 8710p laptop from Purdue University in May of 2008. A little after that it was stolen from me. Thankfully I had it LoJack secured, and they were able to recover it in London. When I got my computer back, however, the Windows XP that it had come pre-installed with was...
This is quite possibly the strangest error sequence I've come across in all my years working with computers. My system has issues. Unfortunately. Possibly more than one. But I do know that for about the last month, up until this morning, any attempt to turn on my system would require the...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 21:22.
Find Us