Windows failed to start and can't find operating system

Page 3 of 7 FirstFirst 12345 ... LastLast

  1. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #21

    You can get http://www.ultimatebootcd.com/download.html and use parted magic's subprogram TestDisk to repair it. The step by step guide is TestDisk Step By Step - CGSecurity

    It is a somewhat complicated process, but it is all laid out there for you to use.

    Edit: updated the site to get ultimatebootcd. The downloads are in the mirrors at the bottom of the page.
      My Computer


  2. Posts : 19
    Windows 7 Home Premium 32bit
    Thread Starter
       #22

    Right now I pretty much have no idea what's going on, but guessing from what Diskpart says about Disk 0 I'm thinking what I did made my problem worse (no partitions?! where did C go?):

    LIST DISK

    Disc # / Status / Size / Free / Dyn / Gpt
    Disk 0 / Online / 232 GB / 232 GB
    Disk 1 / No Media / 0 B / 0 B

    DETAIL DISK

    Disk ID: 06094833
    Type: SATA
    Status: Online
    Path: 0
    Target: 0
    LUN ID: 0
    Location Path: (not going to type this unless it will be useful)
    Current read-only state: No
    Boot Disk: No
    Pagefile disk: No
    Hibernation file disk: No
    Crashdump disk: No
    Clustered disk: No

    There are no volumes.

    SEL DISK 0 -> LIST PART

    There is no partitions on this disk to show.

    writhziden, do you still recommend trying TestDisk?
      My Computer


  3. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #23

    I highly recommend trying TestDisk. I helped someone with a similar problem on an external drive earlier in the week, and I found that a partition recovery tool is the only possibility of recovering the lost partition (and in this case, the operating system as well).
      My Computer


  4. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #24

    silvergreen said:
    Right now I pretty much have no idea what's going on, but guessing from what Diskpart says about Disk 0 I'm thinking what I did made my problem worse (no partitions?! where did C go?)
    Basically, it appears your partitions were deleted. TestDisk should be able to pick the partitions up that were deleted and recover the partitions.

    Edit: The nice thing about having deleted the partitions, since you never reformatted the drive, everything is still on there and TestDisk should be able to recover the partition as NTFS instead of the RAW (unformatted) partition. Under no circumstances should you format your drive. That is imperative.
      My Computer


  5. Posts : 19
    Windows 7 Home Premium 32bit
    Thread Starter
       #25

    I'm planning to try TestDisk, but before I do that: can anyone please explain in simple terms what happened after I ran those commands in Diskpart? Before I had a rough understanding of what the results were saying - the C drive was there, but the computer couldn't recognize it because it was RAW, it was 232GB, etc. Now after running those commands I have NO clue why Disk 0 doesn't have any partitions or volumes or why it says C is Removable and has a No Media status...or why I got that "no bootable sectors" message. I'm not a tech person at all, so maybe this will teach me to run commands I don't understand, but I'd really appreciate any insight that can help me understand the current situation. What went wrong?
      My Computer


  6. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #26

    silvergreen said:
    I'm planning to try TestDisk, but before I do that: can anyone please explain in simple terms what happened after I ran those commands in Diskpart? Before I had a rough understanding of what the results were saying - the C drive was there, but the computer couldn't recognize it because it was RAW, it was 232GB, etc. Now after running those commands I have NO clue why Disk 0 doesn't have any partitions or volumes or why it says C is Removable and has a No Media status...or why I got that "no bootable sectors" message. I'm not a tech person at all, so maybe this will teach me to run commands I don't understand, but I'd really appreciate any insight that can help me understand the current situation. What went wrong?
    My guess is that since you did the third of the three steps first, it corrupted the boot data and deleted your partition. Then running all three again was unable to recover that corruption. I may be wrong, but this is my guess.

    Edit: Deleted your partition is probably wrong. I think it hid the partition somehow. Anyway, I need to make a run to the store to pick up some last minute items for Thanksgiving. I'll be back to check on your progress with TestDisk. Good luck!
      My Computer


  7. Posts : 10,796
    Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
       #27

    diskpart didn't screw up your disk. Those commands are display commands only.
    Writing a new mbr and bootsector shouldn't be a problem as well. Maybe a stupid virus is the problem. try testdisk
      My Computer


  8. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #28

    Kaktussoft said:
    diskpart didn't screw up your disk. Those commands are display commands only.
    Writing a new mbr and bootsector shouldn't be a problem as well. Maybe a stupid virus is the problem. try testdisk
    I was speaking of this post:

    Kaktussoft said:
    Go into recovery environment and start "command prompt"
    bootsect /nt60 C: /mbr
    bootrec /fixmbr
    bootrec/fixboot

    post results. Are you able to boot now? C still listed as RAW?
    and then this one:

    silvergreen said:
    Oh, man....I mistyped the first two lines (accidentally wrote "nbr" instead of "mbr") and didn't realize the commands didn't go through. The third, however (bootrec/fixboot) did.

    Then I realized my mistake and retyped the three commands and restarted the computer. Upon restart, I got: "No bootable devices--strike F1 to retry boot, F2 for setup utility. Press F5 to run onboard diagnostics." F1 doesn't do anything; F2 takes me to the BIOS configuration page.

    Did I make the problem worse? Is there anything I can do? I can still access the Recovery Options using my recovery disc...but now I am almost missing the original "Windows failed to start" message, which was less terrifying than this one.
    I know it was not Diskpart that caused the problem.
      My Computer


  9. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #29

    Silvergreen, what's the status on the TestDisk? Any luck?
      My Computer


  10. Posts : 19
    Windows 7 Home Premium 32bit
    Thread Starter
       #30

    Well, it took me a while to run TestDisk (I had to ask for help from a friend) and just rebooted....only to get a new error message:

    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. Choose your language settings, and then click next
    3. Click "repair your computer."

    Status: 0xc0000000e

    Info: The boot selection failed because a required device is inaccessible.


    Looks like I'm back where I started...?
      My Computer


 
Page 3 of 7 FirstFirst 12345 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:34.
Find Us