Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer with hall.dll+ntoskrnl.exe BSODS like crazy (BF3 + SWTOR)

25 Nov 2011   #1
no00wa

Windows 7 SP1
 
 
Computer with hall.dll+ntoskrnl.exe BSODS like crazy (BF3 + SWTOR)

Been having these problems for a while now, recently replaced a videocard because that clearly was one source of these BSODS. Still one card in there that doesn't overclock like a normal 6950 should (and needs too much voltage for super mild core OCs), but i don't think it has anything to do with the BSODS.

This is just getting out of hand, been playing with OCs for a while till i started getting a lot of trouble with it. After a while i "gave up" and tried everything at stock and slowly increasing speeds, one thing at a time. Now im getting BSODs with super mild OC's/No OC's (Videocards stock, CPU at 103.0x42 while it can run at 100x48 and sometimes i run it even at stock) and they come and go randomly. this ONLY happens in games and can happen after 2 mins or after 2 hours, completely random.

I'm starting to think there's just something completely different wrong with my computer and this is very frustrating, especially since im in computers myself. Could someone have a look at these files pretty please and see if there's anything out of the ordinary?

Me, myself, suspects the motherboard is at fault since BCLK speeds of even 104mhz or 103.5 give BSODS like its christmas time.


My System SpecsSystem Spec
.
25 Nov 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by no00wa View Post
Been having these problems for a while now, recently replaced a videocard because that clearly was one source of these BSODS. Still one card in there that doesn't overclock like a normal 6950 should (and needs too much voltage for super mild core OCs), but i don't think it has anything to do with the BSODS.

This is just getting out of hand, been playing with OCs for a while till i started getting a lot of trouble with it. After a while i "gave up" and tried everything at stock and slowly increasing speeds, one thing at a time. Now im getting BSODs with super mild OC's/No OC's (Videocards stock, CPU at 103.0x42 while it can run at 100x48 and sometimes i run it even at stock) and they come and go randomly. this ONLY happens in games and can happen after 2 mins or after 2 hours, completely random.

I'm starting to think there's just something completely different wrong with my computer and this is very frustrating, especially since im in computers myself. Could someone have a look at these files pretty please and see if there's anything out of the ordinary?

Me, myself, suspects the motherboard is at fault since BCLK speeds of even 104mhz or 103.5 give BSODS like its christmas time.
Unfortunately DMP files dont give that level of detail. These are all hardware related of course, and my normal reaction would be to say reset everything to stock, but you seem to have a good grasp of it.

I do notice a large number of "unusual" drivers. One of these may be throwing the hware BSOD. I doubt it but it cant help to check.

To that end I would run driver verifier.

Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
26 Nov 2011   #3
no00wa

Windows 7 SP1
 
 

Thanks for the quick reply!

I would say im pretty resourceful, at least someone with a little knowledge (or goodluck with my education haha) but this is baffling me.

Anyways, did as you said andddddd (almost didn't make a restore disk, so glad i did ) it crashes INTO Windows. Since i had "no GUI boot" on, i couldn't boot into safe mode and had to restore it straight away .

It crashes every single time booting into windows, couldn't find anything with automagic repair but restored successfully. Created atleast 4 new dumps but unfortunately the restore threw 3 (and a lot of others) of them away?

Hope this helps:



Edit; this appears to be Daemon Tools / Sata settings for my Blu-Ray burner but i'll wait till i hear from you!
My System SpecsSystem Spec
.

26 Nov 2011   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by no00wa View Post
Thanks for the quick reply!

I would say im pretty resourceful, at least someone with a little knowledge (or goodluck with my education haha) but this is baffling me.

Anyways, did as you said andddddd (almost didn't make a restore disk, so glad i did ) it crashes INTO Windows. Since i had "no GUI boot" on, i couldn't boot into safe mode and had to restore it straight away .

It crashes every single time booting into windows, couldn't find anything with automagic repair but restored successfully. Created atleast 4 new dumps but unfortunately the restore threw 3 (and a lot of others) of them away?

Hope this helps:



Edit; this appears to be Daemon Tools / Sata settings for my Blu-Ray burner but i'll wait till i hear from you!
This one is Related to dtsoftbus01.sys Virtual Bus Driver from DT Soft Ltd;. I would remove it to test.
My System SpecsSystem Spec
27 Nov 2011   #5
no00wa

Windows 7 SP1
 
 

I've deleted the drivers/program from Daemon tools, made a new restore point and tried the procedure again.

So far, no problems (after 12 hours which i find "enough" to test for, for now) so any other ideas that i might try out?

Edit: Just rebooted my computer and got 2 Blue screens right away, seems to be MSI afterburner but i kind of need that program to test? :P Not right now but it's been running stable all day yesterday at stock speeds. 1 day doesn't say much though, had that before. Maybe i will delete it for the time being but i've included the files so you can have a peek!
My System SpecsSystem Spec
27 Nov 2011   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by no00wa View Post
I've deleted the drivers/program from Daemon tools, made a new restore point and tried the procedure again.

So far, no problems (after 12 hours which i find "enough" to test for, for now) so any other ideas that i might try out?

Edit: Just rebooted my computer and got 2 Blue screens right away, seems to be MSI afterburner but i kind of need that program to test? :P Not right now but it's been running stable all day yesterday at stock speeds. 1 day doesn't say much though, had that before. Maybe i will delete it for the time being but i've included the files so you can have a peek!
These were Related to RTCore64.sys MSI Afterburner from Micro-Star Int'l Co. Ltd. You only need this (i believe) if you are overclocking). iwould remove it.
My System SpecsSystem Spec
Reply

 Computer with hall.dll+ntoskrnl.exe BSODS like crazy (BF3 + SWTOR)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
New Rig Crashing hall.dll 0x4ce7c669 + ntoskrnl.exe 0x51fb06cd
Specs Asus Maximus 7 Hero i7 4790k 4Ghz 8mb Cache 16GB Ram NVDIA GeForce GTX 760 2GB PSU 630W Thermaltake 1TB HDD I checked the dump file with with OSR Online - The Home Page for Windows Driver Developers
BSOD Help and Support
Random BSOD every start up - 3hours ntoskrnl.dll hall.dll pagefile err
it says hardware failure, but not sure. various error codes and causes. memtest checked, hdd ok.
BSOD Help and Support
Random ntoskrnl.exe BSODs if I am not currently at the computer
So over the past 3 days my computer has blue screened about 5 times, yet I'm never there to witness it, it always crashes if I leave it alone for 10 minutes to go get food or finish up something around the house. Last time it crashed I decided I'd stop using my computer and watch it to see what may...
BSOD Help and Support
Random BSODs ntoskrnl.exe+26ee0 & ntoskrnl.exe+5063dc
I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium. My guess is that the issue is driver...
BSOD Help and Support
Uhmm, Kinda Lost... BSODs like crazy!
Windows 7 . . . - 64 bit - New Build - Retail, Ultimate Age of OS is less than two weeks. Been through several lengthy memtest sessions. Thought I had found the bad module and removed it, though BSODs persist. Thank you all for any help I can get.
BSOD Help and Support
Random BSoDs driving me Crazy!
Error codes are usually Page_Fault_in_non_paged_area IRQL_NOT_LESS_OR_EQUAL DRIVER_IRQL_NOT_LESS_OR_EQUAL SYSTEM_SERVICE_EXCEPTION Occasionally I will also have the failing system file shown to be atikmdag.sys or atipmdag.sys, related to my graphics card, however I removed my gpu and its...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App