Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on shutdown or reset, error 0x9f.

02 Dec 2011   #1
Eurosnob

Windows 7 Ultimate x64
 
 
BSOD on shutdown or reset, error 0x9f.

As per the title I get freezes on reset or shutdown attempts about 95% of the time.

I recently replaced the PSU with a much beefier unit after the original melted so the system is getting plenty of power.

W7 Ultimate x64 (full retail), system is < 2 years old.

Any suggestion are welcome.

Thanks.


My System SpecsSystem Spec
.

02 Dec 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Eurosnob View Post
As per the title I get freezes on reset or shutdown attempts about 95% of the time.

I recently replaced the PSU with a much beefier unit after the original melted so the system is getting plenty of power.

W7 Ultimate x64 (full retail), system is < 2 years old.

Any suggestion are welcome.

Thanks.

Related to RTL2832UBDA.sys USB DVB BDA Drive from REALTEK SEMICONDUCTOR Corp.. Re-install with the newest version available.
My System SpecsSystem Spec
02 Dec 2011   #3
Eurosnob

Windows 7 Ultimate x64
 
 

Roger. Will give it a go and report back.
My System SpecsSystem Spec
.


02 Dec 2011   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Eurosnob View Post
Roger. Will give it a go and report back.

Let us know if you need help
My System SpecsSystem Spec
02 Dec 2011   #5
Eurosnob

Windows 7 Ultimate x64
 
 

Help?

I can't find it in device manager to get it to update the driver. Suggestions?
My System SpecsSystem Spec
02 Dec 2011   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Eurosnob View Post
Help?

I can't find it in device manager to get it to update the driver. Suggestions?
Check show hidden> look under USB
My System SpecsSystem Spec
Reply

 BSOD on shutdown or reset, error 0x9f.




Thread Tools





Similar help and support threads
Thread Forum
BSOD after shutdown, error 0x00000d1, shutdown not complete
Hi guys, I have a problem :cry:, from a few days now I have these BSOD, and could not imagine why, can't remember if I installed anything wrong. Maybe you can help i will attach the archive so I hope it will work. I tried to uninstall the video driver, didn't help. error is Bug Check...
BSOD Help and Support
BSOD on shutdown - DRIVER_POWER_STATE_FAILURE 0x9F 0x3
I would greatly appreciate some help in tracking down this problem. Thank you so much for your valuable time and expertise! THANK YOU. Problem: Upon shutdown, Windows 7 will say shutting down for about 8 minutes and then blue screen. Otherwise, the pc runs fine; it just won't shutdown. ...
BSOD Help and Support
BSOD when S3/reboot resume, DRIVER_POWER_STATE_FAILURE error 0x9f
Dears, We use Intel Cedar trail platform. When we run S3/reboot long time test, system occurs BSOD issue. The error message is DRIVER_POWER_STATE_FAILURE, and error code is 0x9f. The detail information is in attachment. Any suggestion for us? Thanks for your help.
BSOD Help and Support
BSOD, ntoskrnl.exe, error code 0x9F
hi, i just got this computer three days ago and everytime i shut the lid to let it to go sleep or standby, i open it back up the computer is off and when i boot it back on it comes up saying is bluescreened and always refers back to ntoskrnl. any help? fifth time this has happened. ive done...
BSOD Help and Support
Computer on and idling and get bsod, previously was error 0x9F
Acer Aspire X3400, Windows 7 Ultimate x64 (fresh install) and I get a bsod when the computer is idle. I am attaching the zip file with all the dump files, perfmon, etc. per the Read Me. Any help would be appreciated as I have been battling this issue for a while now.
BSOD Help and Support
Reset button goes to windows did not shutdown properly screen
I have a gaming case and when i press the reset button on top.it all goes ok ,but then the windows did not shutdown properly screen,it gives me options start in normal mod,,safe mode et.t.c ANy help why it dows this. The pc restarts fine and shutsdown ok too!!!
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:47.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App