BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing.

*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp
0x4ce7c669

Minidump is attached

Windows 7
4 GB ram
Intel Q9450
Gigabit MB
Raptor HD

Full data is now attached

Bump, Anybody?

jonnyd91 said:

Windows 7
4 GB ram
Intel Q9450
Gigabit MB
Raptor HD

Full data is now attached

Click to expand...

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress

Click to expand...

Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.


You can read more on this error and what to try here... http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

ehhh, i think if it keeps doing it ill just use it as an excuse to upgrade then