Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need help with BSOD fresh format and same drivers i've using before..


12 Dec 2011   #1

Windows 7 Ultimate x64
 
 
Need help with BSOD fresh format and same drivers i've using before..

hey I've just had a fresh format with the drivers I've been using for months (stored on a different HHD) and now my PC will randomly blue screen when either just sitting or a windows update so yeah I've got the mini-dumps so I'll upload them if anyone can give me some help as I'm stumped..

Attachment 187906


My System SpecsSystem Spec
.

12 Dec 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by spicymouse View Post
hey I've just had a fresh format with the drivers I've been using for months (stored on a different HHD) and now my PC will randomly blue screen when either just sitting or a windows update so yeah I've got the mini-dumps so I'll upload them if anyone can give me some help as I'm stumped..

Attachment 187906

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!



1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
My System SpecsSystem Spec
13 Dec 2011   #3

Windows 7 Ultimate x64
 
 

yeah i ran memtest later that night and one of ram dims was dead =/ one of the gold connectors was burnt problem solved cheers
My System SpecsSystem Spec
.


13 Dec 2011   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by spicymouse View Post
yeah i ran memtest later that night and one of ram dims was dead =/ one of the gold connectors was burnt problem solved cheers
Hope it is under warranty.
My System SpecsSystem Spec
13 Dec 2011   #5

Windows 7 Ultimate x64
 
 

yeah oddly enough i only got the new set of ram about a week ago..
My System SpecsSystem Spec
Reply

 Need help with BSOD fresh format and same drivers i've using before..




Thread Tools



Similar help and support threads for2: Need help with BSOD fresh format and same drivers i've using before..
Thread Forum
BSOD while trying to update drivers and windows on fresh install BSOD Help and Support
BSOD Installing drivers after a fresh windows install, Code 0xf4 BSOD Help and Support
getting BSOD after updates/drivers on fresh install (new machine) BSOD Help and Support
Do I need to format my SSD before doing a fresh Win 7 intall? Hardware & Devices
Fresh Install - format? Installation & Setup
BSOD even after fresh format and install BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:08 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33