Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD x119 - And random monitor signal failures.

17 Dec 2011   #1

Windows 7 Home Premium x64
 
 
BSOD x119 - And random monitor signal failures.

Hi everyone!

Yesterday i got my PC back from repairation due, my monitor not having signal randomly after a while of pc usage. And the computer is still runing.

Before i sent it in i tried different monitors, and i still had the same issue.
I also tried to reinstall Windows 7 but with no succes.

When it got repaired they changed my GFX Card, my Cooler and my RAM which they actually replaced with some others, which are worse, but nevermind.


So yesterday i got a BSOD with the error x119 a Kernel error or something. But it hasnt happend today after fixing up some drivers, so i think it works now.

The problem is that my computer still just randomly "disconnects" from my monitor even though the computer is still running, but it works agian after restarting.

And my GFX was laying under 40 celcius before the random disconnects happend, now its at 40+ celcius.

I just cant figure out what the problem is, i've runned a MemTest which didnt found anything.

Please help

Btw i made a mistake the bug checkcode was -
0x109 (0xA3A039D898BEF51C, 0x0, 0xFFE67FF08B7BF6C5, 0x101)

and

0xD1 (0xFFFFFA800C490010, 0x2, 0x0, 0xFFFFF8800299A0DC)

My System SpecsSystem Spec
.

17 Dec 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Xizors View Post
Hi everyone!

Yesterday i got my PC back from repairation due, my monitor not having signal randomly after a while of pc usage. And the computer is still runing.

Before i sent it in i tried different monitors, and i still had the same issue.
I also tried to reinstall Windows 7 but with no succes.

When it got repaired they changed my GFX Card, my Cooler and my RAM which they actually replaced with some others, which are worse, but nevermind.


So yesterday i got a BSOD with the error x119 a Kernel error or something. But it hasnt happend today after fixing up some drivers, so i think it works now.

The problem is that my computer still just randomly "disconnects" from my monitor even though the computer is still running, but it works agian after restarting.

And my GFX was laying under 40 celcius before the random disconnects happend, now its at 40+ celcius.

I just cant figure out what the problem is, i've runned a MemTest which didnt found anything.

Please help




We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
17 Dec 2011   #3

Windows 7 Home Premium x64
 
 

ERROR.zip

Code:
Crash dump directory: C:\WINDOWS\Minidump

Crash  dumps are enabled on your computer.


On Fri  16-12-2011 23:04:36 GMT your computer crashed
crash  dump file:  C:\WINDOWS\Minidump\121711-18392-01.dmp
This was  probably caused by the following module: ntoskrnl.exe  (nt+0x7CC40) 
Bugcheck code: 0x109  (0xA3A039D898BEF51C, 0x0, 0xFFE67FF08B7BF6C5,  0x101)
Error: CRITICAL_STRUCTURE_CORRUPTION
file  path: C:\WINDOWS\system32\ntoskrnl.exe
product:  Microsoft® Windows® Operativsystem
company: Microsoft  Corporation
description: NT-kerne og -system
Bug  check description: This indicates that the kernel has  detected critical kernel code or data corruption.
This  might be a case of memory corruption. More often memory corruption  happens because of software errors in buggy  drivers, not because of  faulty RAM modules. 
The crash took place in the Windows kernel.  Possibly this problem is caused by another driver which cannot be  identified  at this time. 


On Fri 16-12-2011 22:59:34 GMT your computer crashed
crash dump file:  C:\WINDOWS\Minidump\121711-20482-01.dmp
This was  probably caused by the following module: ntoskrnl.exe  (nt+0x7CC40) 
Bugcheck code: 0xD1 (0xFFFFFA800C490010, 0x2, 0x0, 0xFFFFF8800299A0DC)
Error:  DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path:  C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft®  Windows® Operativsystem
company: Microsoft  Corporation
description: NT-kerne og -system
Bug   check description: This indicates that a kernel-mode  driver attempted  to access pageable memory at a process IRQL that was too high.
This appears to be a typical  software driver bug and is not likely to be caused by a hardware problem. 
The  crash took place in the Windows kernel. Possibly this problem is caused  by another  driver which cannot be identified at this time.   ___________

2 crash dumps have been found and  analyzed. 
Read the topic general suggestions for  troubleshooting system crashes for more information.  http://www.resplendence.com[...]
No BSOD has occured today though.



UPDATE

It just happend agian it was a BSOD but i didnt see the blue screen the monitor just didnt have a signal:

http://www.**************/?h5k2kca1beq1a48

I also found some "Live kernel reports":

http://www.**************/?fdh6hjnaklpm11s
My System SpecsSystem Spec
.


18 Dec 2011   #4

Windows 7 Home Premium x64
 
 

Bump...

My computer just shutoff without a warning.
When i tried to start it agian, the computer was running but none of my fans were running, and nothing showed up on the screen.
My System SpecsSystem Spec
18 Dec 2011   #5

Windows 7 Home Premium x64
 
 

Do i really have to bump agian?
My System SpecsSystem Spec
18 Dec 2011   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Xizors View Post
Bump...

My computer just shutoff without a warning.
When i tried to start it agian, the computer was running but none of my fans were running, and nothing showed up on the screen.

Your .dmp file shows a stop error of 0x124 which is a general hardware error .
Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress
Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.



You can read more on this error and what to try here...
Stop 0x124 - what it means and what to try
My System SpecsSystem Spec
18 Dec 2011   #7

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Xizors View Post
Bump...

My computer just shutoff without a warning.
When i tried to start it agian, the computer was running but none of my fans were running, and nothing showed up on the screen.

Your .dmp file shows a stop error of 0x124 which is a general hardware error .
Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress
Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.



You can read more on this error and what to try here...
Stop 0x124 - what it means and what to try
Thank you so much, but can you tell me what RAID is because im sure if im running it?
Or better formulated, how can i tell if i have RAID drivers?
BTW im not overclocking, i dont even know how to do it
My System SpecsSystem Spec
18 Dec 2011   #8

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Xizors View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Xizors View Post
Bump...

My computer just shutoff without a warning.
When i tried to start it agian, the computer was running but none of my fans were running, and nothing showed up on the screen.

Your .dmp file shows a stop error of 0x124 which is a general hardware error .
Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress
Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.



You can read more on this error and what to try here...
Stop 0x124 - what it means and what to try
Thank you so much, but can you tell me what RAID is because im sure if im running it?
Or better formulated, how can i tell if i have RAID drivers?
BTW im not overclocking, i dont even know how to do it
REad here for RAID. RAID - Wikipedia, the free encyclopedia
My System SpecsSystem Spec
18 Dec 2011   #9

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Xizors View Post
Quote   Quote: Originally Posted by zigzag3143 View Post


Your .dmp file shows a stop error of 0x124 which is a general hardware error .
Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.



You can read more on this error and what to try here...
Stop 0x124 - what it means and what to try
Thank you so much, but can you tell me what RAID is because im sure if im running it?
Or better formulated, how can i tell if i have RAID drivers?
BTW im not overclocking, i dont even know how to do it
REad here for RAID. RAID - Wikipedia, the free encyclopedia
So its basicly 2 harddisks combined? Or just having 2 harddisks?
Because i only got 1.
My System SpecsSystem Spec
18 Dec 2011   #10

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Xizors View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Xizors View Post

Thank you so much, but can you tell me what RAID is because im sure if im running it?
Or better formulated, how can i tell if i have RAID drivers?
BTW im not overclocking, i dont even know how to do it
REad here for RAID. RAID - Wikipedia, the free encyclopedia
So its basicly 2 harddisks combined? Or just having 2 harddisks?
Because i only got 1.
If you have one drive you dont have raid.
My System SpecsSystem Spec
Reply

 BSOD x119 - And random monitor signal failures.





Thread Tools



Similar help and support threads for2: BSOD x119 - And random monitor signal failures.
Thread Forum
BSOD during random actions, no signal after computer sleeps BSOD Help and Support
Solved Random freeze, random BSOD, no signal to screen BSOD Help and Support
Random BSOD and boot failures on new computer BSOD Help and Support
BSODs, freezes, random rebooting and signal loss to monitor BSOD Help and Support
Random crashes, failures to sleep BSOD Help and Support
Random restarts, BSOD, and OC failures BSOD Help and Support
No monitor signal, keyboard and mouse dead at random Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:47 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33