Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Constant BSOD after previous problems

20 Dec 2011   #21
Jwoodall92

Windows Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
Quote   Quote: Originally Posted by Jwoodall92 View Post
Heres the .csv
I didnt run it for too long, I was going to start a game so that you could see the temperatures maybe spike if thats the problem but then realised you have to stop the logging for it to create the document.. I didnt experience any BSOD's whilst it was running.
You shouldn't need to stop the logging for it to create the document. When I run it, it creates the document in realtime.

Temperatures look good for that set. See what happens if you Blue Screen.
Here you go, it was pretty sudden on start up, like literally as soon as the game started loading it just cut out.


My System SpecsSystem Spec
.
20 Dec 2011   #22
Jwoodall92

Windows Ultimate x64
 
 

Just trying all the RAM sticks in different slots, I have 3 possible slots (1 obstructed by the CPU fan) and i've so far tried 2 of the slots, each time with just the 1 stick in the 1 slot and its cut out every single time.

I've just thought, my brother has a PC in the same house, I could try his CPU in my PC and see if the problem persists? I've checked and its compatible..
My System SpecsSystem Spec
20 Dec 2011   #23
writhziden

Windows 7 Home Premium 64 Bit
 
 

Temperatures are within tolerances for all components... Don't see anything obvious in the log that would point toward the issue. Recommend memory module swapping or processor setting changes next. If you do not want to do memtest until a later date, that is fine. Just test the memory through gaming and see if any configurations provide stability.
My System SpecsSystem Spec
.

20 Dec 2011   #24
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Jwoodall92 View Post
Just trying all the RAM sticks in different slots, I have 3 possible slots (1 obstructed by the CPU fan) and i've so far tried 2 of the slots, each time with just the 1 stick in the 1 slot and its cut out every single time.

I've just thought, my brother has a PC in the same house, I could try his CPU in my PC and see if the problem persists? I've checked and its compatible..
If it isn't too much hassle to you or your brother, you could try it. It may be a problem with your CPU or your motherboard.
My System SpecsSystem Spec
20 Dec 2011   #25
Jwoodall92

Windows Ultimate x64
 
 

Just finished trying all possible RAM in all possible slots, same result each time.
I'm now gonna try changing processor settings and RAM settings but a little lost on what to actually change.
RAM is currently at the minimum ratio (1:2 running at 960 MHz) and the processor running at x11, 2640 MHz.
Theres loads of options such as AMD Cool N Quiet, CPU-NB ratio, EC Firmware, advanced clock calibration, auto overclock technology and multistep OC booster which I have no clue about and this is only the processor. What sort of things should I be changing? Just stick to lowering the CPU ratio for the processor and FSB/DRAM ratio for the RAM?

These are the possible options for the RAM, i've already listed the options for the CPU above. They're all in the ADVANCE DRAM CONFIGURATION menu.
DRAM timing mode
DRAM drive strength
DRAM advance control
1T/2T memory timing
DCT Unganged mode
bank interleaving
power down enable
MemClk Tristate CD/ATLVID
My System SpecsSystem Spec
20 Dec 2011   #26
writhziden

Windows 7 Home Premium 64 Bit
 
 

Try to find a forum for your motherboard, memory, and/or CPU and see what others have recommended. It really varies depending on what your hardware is capable of.
My System SpecsSystem Spec
20 Dec 2011   #27
Jwoodall92

Windows Ultimate x64
 
 

Just put my brothers processor in and on startup its told me one of my disks need to be checked for consistency..
My System SpecsSystem Spec
20 Dec 2011   #28
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Jwoodall92 View Post
Just put my brothers processor in and on startup its told me one of my disks need to be checked for consistency..
That is pretty common after blue screen errors. System crashes can cause the system to shut down unexpectedly and data being written to the hard disk becomes corrupted.
My System SpecsSystem Spec
20 Dec 2011   #29
Jwoodall92

Windows Ultimate x64
 
 

Yep, pretty sure its the processor, just ran the game for a good 15 minutes and before it was 2 minutes max.
Thanks for your help though man.
Wish it turned out to just be a stick of RAM that was faulty though..
My System SpecsSystem Spec
20 Dec 2011   #30
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Jwoodall92 View Post
Yep, pretty sure its the processor, just ran the game for a good 15 minutes and before it was 2 minutes max.
Thanks for your help though man.
Wish it turned out to just be a stick of RAM that was faulty though..
No problem. Sorry it was the processor causing the issue; that's usually pretty rare. Is the processor still under warranty?
My System SpecsSystem Spec
Reply

 Constant BSOD after previous problems




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Constant problems after getting SSD.
I recently got an SSD about a month back (60gb vertex plus) and after installing windows 7 on it I've had constant problems since, the first few days after a clean install are fine, no problems, then I start to get a few symptoms after a few days: -Windows constantly wants to perform CHKDSK on...
General Discussion
constant connection problems
Hello, I've searched in the forum before posting but i couldn't find any solution to my problem. Since i updated to windows 7 ( ultimate 64x ) i've experienced some issues with my internet connection. The connection set at the house is 10mb but the internet speed that reaches to my desktop (...
Network & Sharing
Problems with system, other than previous BSOD
Hi all, I'm not sure if this is in the correct forum or not, but I'm having an issue with my system. It's not saving startup/recovery settings (when changing it to small dump instead of kernel) not sure if this is normal or not. Another problem is a bluetooth settings problem, Everytime i try...
Hardware & Devices
Constant Crashing, constant BSOD's
Alright, so the situation has gotten worse, a few weeks back I made a thread and someone advised me to remove Daemon/Alcohol 120 and then remove the leftovers using a specific tool, and it seemed to be fine for a while, but now my computer is starting to crash full force. I was just playing...
BSOD Help and Support
Random BSOD and constant internet problems
Hello. Sorry that my second post here is to ask for help but im getting mad. I had Win 7 RC for a while and everything was fine. Now I upgraded to Win 7 RTM (Clean install) and I recently started to have some crazy problems. Sometimes I get BSOD with no apparent reason My Internet slows...
BSOD Help and Support
USB Ports constant problems
I first thought it was my mouse that was malfunctioning, but after trying all kinds of things I have concluded that Win 7 is causing this: After a while, one by one, all of my USB ports stop working. First the ones in my monitor, I dosconnected them and then my 7 port usb hub stopped working. I...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App