Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ASUS EEEPC 1005 startup repair loop-hardware issue?

30 Dec 2011   #31
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by mraimondi View Post
Im in devmngr, with "everything" shown now, but still no monitor?! Interestingly, "Security Processor Loader Driver" has a ! on it. Probably not related, though, huh? Just uninstalled graphics driver again. I'll try finding the driver buried in the restore partition, and see how it works.
Does the Monitors level show up in Device Manager in normal mode? Check it out if you can get back into normal operating mode and let me know.

Edit: It should be in the same place as in my picture


My System SpecsSystem Spec
.
30 Dec 2011   #32
mraimondi

Windows 7 starter, Ultimate 64
 
 

Did it. Restarted, message says, "Device driver was not successfully installed." -video controller, no driver found
ASUS restore is one big archive, so no go on using the original driver.

In device manager- Display adapter has the generic driver, but then below under Other devices it has Video controller- and that has a code 28
My System SpecsSystem Spec
30 Dec 2011   #33
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by mraimondi View Post
Did it. Restarted, message says, "Device driver was not successfully installed." -video controller, no driver found
ASUS restore is one big archive, so no go on using the original driver.
This was for the monitor or display card?
My System SpecsSystem Spec
.

30 Dec 2011   #34
mraimondi

Windows 7 starter, Ultimate 64
 
 

I did it for the monitor like you suggested. The display card driver was uninstalled after the most recent BSOD. I had to uninstall it to get back into normal windows, and therefore, to get to the normal device manager, where the monitor was displayed.
My System SpecsSystem Spec
30 Dec 2011   #35
writhziden

Windows 7 Home Premium 64 Bit
 
 

If you now install the display card without the monitor installed, does it work?
My System SpecsSystem Spec
30 Dec 2011   #36
mraimondi

Windows 7 starter, Ultimate 64
 
 

DLing some different drivers from ASUS... be right with you
My System SpecsSystem Spec
30 Dec 2011   #37
mraimondi

Windows 7 starter, Ultimate 64
 
 

Super hybrid engine as I understand is like an over/underclocker for the atom cpu. Some forums had indicated that it caused problems with displays. As long as I've had this eee pc, if you plugged it in while it was on, the screen would get lines that made it unreadable. I updated to SHE software a late 2011 version, then reinstalled the Intel driver. So far, so good. Normal Boot!!!

Strangely though there is NO audio device detected, even as a hidden device. It had a little red X on the speaker icon, but I was worrying about one thing at a time.
My System SpecsSystem Spec
30 Dec 2011   #38
writhziden

Windows 7 Home Premium 64 Bit
 
 

Glad you remembered reading about that. That is definitely a plus.

Are there any buttons on the laptop itself for disabling audio? I know some laptops have such features for the audio, wireless, and even the mousepad. Could be related.
My System SpecsSystem Spec
31 Dec 2011   #39
mraimondi

Windows 7 starter, Ultimate 64
 
 

Just to be sure, I restored w/ F9 one more time, then IMMEDIATELY re-installed the updated Super Hybrid Engine 2.19, and all is well. Windows updates work fine now.

Thanks SO MUCH for all your help with this issue. My wife thanks you too, she really appreciates having her netbook back!

The audio still doesn't work, even after installing the ASUS/realtek driver. Device manager doesnt even show a sound device existing. I may need to make a new post for this.
My System SpecsSystem Spec
Reply

 ASUS EEEPC 1005 startup repair loop-hardware issue?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Startup Repair loop, how to do a repair install
My wife's PC crashed today and got into a startup repair loop. I'm hoping that I can do a repair install, but I can't figure out how to do so. Here's the details: Her system is just a few months old. Here are the specs: ASUS P8Z77-Mpro motherboard Intel i5-3570K (not overclocked) - intel...
Installation & Setup
Startup Repair Loop, ASUS/INTEL/RADEON PC build
hi there, I'll describe my initial problem first: Packard bell PC imedia something, radeon sapphire 5670 HD GPU upgrade, recent (Jan 2012) windows 7 64 bit custom install upgrade from vista 32 bit, during which i backed up all files on a Samsung external hard drive, then did a complete hard...
BSOD Help and Support
Startup Repair loop -repair installation?
Dear all, A little over a week ago, my system BSOD'd (too quickly for me to see the first time) and eventually after a number of restarts rebooted normally and ran fine for the next day or so. The following day, I was unable to get the machine to post, with fans spinning but not a lot else....
BSOD Help and Support
Windows 7 won't startup properly - Stuck in startup repair loop
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to...
BSOD Help and Support
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support
Startup repair scan loop issue...
Hi all, newbie here.. Got a new laptop only 1 week ago and this morning all hell broke loose :cry: Had absolutely no complaints with it till today.. Turned it on and it started a startup repair scan. Said unable to fix problems or something and when I tried to exit it just kept doing another...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App