Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue screen ACPI error after installing a New Graphics Card plz HELP

20 Dec 2011   #1

Microsoft Windows 7 Home Premium 64bit
 
 
Blue screen ACPI error after installing a New Graphics Card plz HELP

I have a Intel DG31PR Motherboard, and with a new Galaxy GeForce GT520 w/2048mb just installed into it I get the below mentioned error... but with out the card installed and using onboard video.. I get no error at all and it boots up just fine...

System is a cpl years old
OS INSTALLED ON NEW DRIVE 1 WEEK AGO

Can anyone help me with this error or know how to correct it.. please help...
thank you very much in advance..

****BLUE SCREEN ERROR MESSAGE****

The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002000)"

SYSTEM INFO:
7 ultimate 64bit
CPU: intel core 2 duo
E4700 @2.6ghz
Memory: 2gb x 2 dual channel
800mhz
H.D.Seagate sata 1ter.
450 watt PS

My System SpecsSystem Spec
.

20 Dec 2011   #2

Windows 7 Ultimate 64bit SP1
 
 

Hi.

You dont have any minidumps in your uploaded folder.

Go to C:\Windows,find the folder with the name Minidump,in this folder find the most recent minidumps and copy paste them in desktop.Then in desktop zip this minidumps and upload them here using the attachment clip.

If the minidump folder is empty,you may need to enable minidumps by following these steps Dump Files - Configure Windows to Create on BSOD
My System SpecsSystem Spec
20 Dec 2011   #3

Microsoft Windows 7 Home Premium 64bit
 
 

The attachment on my original post is a new one please look to see if it has what you are needing .. thanks
My System SpecsSystem Spec
.


20 Dec 2011   #4

Windows 7 Ultimate 64bit SP1
 
 

Again

You dont have any minidumps in your uploaded folder.

Minidumps is a specific file created from crash\bsod.

Go to C:\Windows,find the folder with the name Minidump,in this folder find the most recent minidumps and copy paste them in desktop.Then in desktop zip this minidumps and upload them here using the attachment clip.

If the minidump folder is empty,you may need to enable minidumps by following these steps Dump Files - Configure Windows to Create on BSOD You can also use option 2.
My System SpecsSystem Spec
20 Dec 2011   #5

Microsoft Windows 7 Home Premium 64bit
 
 

well can u tell why i wouldnt have any minidumps after i have activated it and went and put my graphics card back in so it would get the BSOD once activated ? any ideas
on this should i try it again ????




Quote   Quote: Originally Posted by panais View Post
Again

You dont have any minidumps in your uploaded folder.

Minidumps is a specific file created from crash\bsod.

Go to C:\Windows,find the folder with the name Minidump,in this folder find the most recent minidumps and copy paste them in desktop.Then in desktop zip this minidumps and upload them here using the attachment clip.

If the minidump folder is empty,you may need to enable minidumps by following these steps Dump Files - Configure Windows to Create on BSOD You can also use option 2.
My System SpecsSystem Spec
21 Dec 2011   #6

Windows 7 Ultimate 64bit SP1
 
 

Do you use a disk cleanup or any disk cleaners like ccleaner?

If yest stop.

In meantime run SFC /SCANNOW Command - System File Checker you may need to run it 2-3 times to "fix" everything.
My System SpecsSystem Spec
21 Dec 2011   #7

Microsoft Windows 7 Home Premium 64bit
 
 

Hi and ty for the suggestion I ran the scan but it did not find any issues, if you have any other ideas I will be glad to try them any an all help is greatly appreciated... ty Steve





Quote   Quote: Originally Posted by panais View Post
Do you use a disk cleanup or any disk cleaners like ccleaner?

If yest stop.

In meantime run SFC /SCANNOW Command - System File Checker you may need to run it 2-3 times to "fix" everything.
My System SpecsSystem Spec
22 Dec 2011   #8

Windows 8.1 Pro x64
 
 

Please update your BIOS, it dates back to 2007
http://downloadcenter.intel.com/Deta...&lang=eng#help
My System SpecsSystem Spec
22 Dec 2011   #9

Microsoft Windows 7 Home Premium 64bit
 
 

Went and created a bootable flash drive to install my updated bios but when I am
in the area where I have to select the file to load for the new bios it starts with A: for the drive and it is actually located in removable disk E: but the system says it does not recognize E: as a valid drive letter so it wont open the file to load the new update on the flash drive.. any ideas what I might be doing wrong have tried using the A: but it says invalid file name... I am listing the file name as follows
IFLASH2 /PR0071.BIO I belive that is correct.. Please any help or advise for this
to help me update my bios... Thanks all help is greatly appreciated... Steve



Quote   Quote: Originally Posted by yowanvista View Post
Please update your BIOS, it dates back to 2007
http://downloadcenter.intel.com/Deta...&lang=eng#help
My System SpecsSystem Spec
23 Dec 2011   #10

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by SdSteve760 View Post
Went and created a bootable flash drive to install my updated bios but when I am
in the area where I have to select the file to load for the new bios it starts with A: for the drive and it is actually located in removable disk E: but the system says it does not recognize E: as a valid drive letter so it wont open the file to load the new update on the flash drive.. any ideas what I might be doing wrong have tried using the A: but it says invalid file name... I am listing the file name as follows
IFLASH2 /PR0071.BIO I belive that is correct.. Please any help or advise for this
to help me update my bios... Thanks all help is greatly appreciated... Steve



Quote   Quote: Originally Posted by yowanvista View Post
Please update your BIOS, it dates back to 2007
http://downloadcenter.intel.com/Deta...&lang=eng#help
Try the 3rd download "PRG3110H.86A.0071.EB.EXE", it should have an automatic BIOS updater.
My System SpecsSystem Spec
Reply

 Blue screen ACPI error after installing a New Graphics Card plz HELP




Thread Tools



Similar help and support threads for2: Blue screen ACPI error after installing a New Graphics Card plz HELP
Thread Forum
stop 7e acpi.sys error when installing on new build BSOD Help and Support
BSOD after installing new Graphics Card, error 0x000000101 BSOD Help and Support
Blue screen ACPI error after installing a New Graphics Card plz HELP Installation & Setup
Blue Screen - Graphics Card Possibly Related? BSOD Help and Support
Graphics Card Cause Multiple Blue Screen Errors? BSOD Help and Support
Blue screen error because of graphics card driver problem Graphic Cards
Not ACPI Compliant? blue screen mystery BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:55 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33