Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD occurring at random in ntoskrnl.exe, error code: 0x0000003b

22 Dec 2011   #1

Windows 7 Home Premium 64 bit
 
 
BSOD occurring at random in ntoskrnl.exe, error code: 0x0000003b

This is a custom-built desktop system. I built it at the end of September and it has been running fine with no problems up until this month. Since the beginning of the month, it has BSODed 4 times: Dec. 2nd, Dec. 6th, Dec. 19th, and today (Dec. 22nd). Each time, using "BlueScreenView" it shows that the driver causing it was "ntoskrnl.exe" and the error code was: 0x0000003b (For the BSOD that happened today, Windows did not capture a minidump for some reason, so I can only speculate that it was the same error...)

There is no real consistency in what causes it. The screen will just randomly "mess up" with kaleidoscopic distortion, any sound playing will stutter, and then the system crashes to a BSOD. I have installed no new hardware since I built the computer. The last two programs I installed before this began were Skyrim (Nov. 28th) and CDBurnerXP (Nov. 26th). It's hard for me to see how either of these could be the culprit, since it has never BSODed while they were running.

My only "guess" as to what might cause it is a partitioning issue. When I first installed Windows 7, it took up the whole disk (1 TB) with one partition. Later, I created separate OS and DATA partitions. However, the Windows disk management utility did not allow me to create the OS partition of the size I wanted, it limited me to something like 400 GB. I used GParted on an Unbuntu live USB to make the partitions I desired (250 GB OS and 750 GB DATA). I think this was a month before and BSODs showed up. If this is the problem, I will just have to re-intall Windows. I may do that anyway since I am going to install a separate hybrid drive for OS and applications. Unfortunately, I have no system restore points from before Dec. 6th.

Memtest86+ (about 6 passes), the Windows memory testing utility, and disk check have found no errors. I have not run Driver Verifier, but I will soon.

System Specs in quote:
Quote:
System Manufacturer/Model Number: Custom Built
OS: Windows 7 Home Premium 64 bit (OEM disc)
CPU: AMD Phenom II X4 965 3.4 GHz
Motherboard: Asus M4A88T-V EVO
Memory: G.SKILL Ripjaws 8 GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
Graphics Card(s): Asus ATI Radeon HD6870 1GB DDR5
Sound Card: Integrated
Monitor(s) Displays: Acer AL1912 19"
Screen Resolution: 1280x1024
Hard Drives: SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
PSU: CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31
"dump.zip" contains the minidump folder, the system health report HTML, and the "Windows_NT6_BSOD_jcgriff2" report. The system health report is kind of messed up; it doesn't seem to know that I have antivirus installed (PC Tools AV Free), and also claims that the "PC Tools Data Store" is not installed properly. Not really sure what that even means. Will update later if Driver Verifier comes up with anything.


My System SpecsSystem Spec
.

22 Dec 2011   #2

Windows 7 Home Premium 64 bit
 
 

Driver Verifier returned something interesting. When I restarted, Windows initially failed to start, going to a BSOD I had never seen before: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION with an error code of 0x000000c1. When I next restarted, Windows ran startup recovery and asked me to restore to a restore point. After that, it started normally. For some reason, this BSOD also did not create a minidump.
My System SpecsSystem Spec
29 Dec 2011   #3

Windows 7 Home Premium 64 bit
 
 

This (edit: the issue described in the OP) happened again this morning while I was asleep. Does anyone have any insight into what might be causing this?
My System SpecsSystem Spec
.


29 Dec 2011   #4

Windows 7 Home Premium 64 bit
 
 

Possibly interesting detail: I went through the Action Center's "look for solutions for unsolved problems..." process, it could not find anything but had the following description of the problem:

Quote:
Windows
Problem: Shut down unexpectedly
Files that help describe the problem:
122911-15459-01.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
I'm not really sure if these files are helpful in any way. I can't find any of them besides the dump file, though.
My System SpecsSystem Spec
29 Dec 2011   #5

Windows 7 Home Premium 64 Bit
 
 

Taking a look... Should have some steps for you to take within a half hour.

Code:
  1. Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\littleraskol\Windows_NT6_BSOD_jcgriff2\120211-26208-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`02e0b000 PsLoadedModuleList = 0xfffff800`03050670 Debug session time: Fri Dec 2 00:47:21.932 2011 (UTC - 7:00) System Uptime: 18 days 6:03:13.480 Loading Kernel Symbols ............................................................... ................................................................ ....................................... Loading User Symbols Loading unloaded module list ................................... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff80002e7fb65, fffff8800ae21b20, 0} Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff80002e7fb65, Address of the instruction which caused the bugcheck Arg3: fffff8800ae21b20, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!ExpInterlockedPopEntrySListFault16+0 fffff800`02e7fb65 498b08 mov rcx,qword ptr [r8] CONTEXT: fffff8800ae21b20 -- (.cxr 0xfffff8800ae21b20) rax=000000155e860003 rbx=0000000000000008 rcx=fffff880009ea060 rdx=0042034c61004201 rsi=0000000000000012 rdi=0000000000000008 rip=fffff80002e7fb65 rsp=fffff8800ae22500 rbp=fffff880009ea060 r8=0042034c61004200 r9=fffff80002e0b000 r10=fffff880009ea060 r11=0000000000000000 r12=fffff80003012340 r13=0000000000000000 r14=0000000000000002 r15=000000006770534e iopl=0 nv up ei pl nz na po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206 nt!ExpInterlockedPopEntrySListFault16: fffff800`02e7fb65 498b08 mov rcx,qword ptr [r8] ds:002b:0042034c`61004200=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: WmiPrvSE.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002e7fb65 STACK_TEXT: fffff880`0ae22500 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!ExpInterlockedPopEntrySListFault16 FOLLOWUP_IP: nt!ExpInterlockedPopEntrySListFault16+0 fffff800`02e7fb65 498b08 mov rcx,qword ptr [r8] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!ExpInterlockedPopEntrySListFault16+0 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aaa3 STACK_COMMAND: .cxr 0xfffff8800ae21b20 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0 BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0 Followup: MachineOwner ---------
  2. Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\littleraskol\Windows_NT6_BSOD_jcgriff2\120611-26613-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`02e4c000 PsLoadedModuleList = 0xfffff800`03091670 Debug session time: Tue Dec 6 19:08:26.024 2011 (UTC - 7:00) System Uptime: 4 days 18:20:04.569 Loading Kernel Symbols ............................................................... ................................................................ ..................................... Loading User Symbols Loading unloaded module list ...................... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff80002ec0b65, fffff88003c9fb20, 0} Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 ) Followup: MachineOwner --------- 2: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff80002ec0b65, Address of the instruction which caused the bugcheck Arg3: fffff88003c9fb20, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!ExpInterlockedPopEntrySListFault16+0 fffff800`02ec0b65 498b08 mov rcx,qword ptr [r8] CONTEXT: fffff88003c9fb20 -- (.cxr 0xfffff88003c9fb20) rax=000000067b420002 rbx=0000000000000008 rcx=fffff88003165060 rdx=0046002057004601 rsi=0000000000000012 rdi=0000000000000008 rip=fffff80002ec0b65 rsp=fffff88003ca0500 rbp=fffff88003165060 r8=0046002057004600 r9=fffff80002e4c000 r10=fffff88003165060 r11=0000000000000000 r12=fffff80003053340 r13=0000000000000000 r14=0000000000000002 r15=000000006770534e iopl=0 nv up ei pl nz na po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206 nt!ExpInterlockedPopEntrySListFault16: fffff800`02ec0b65 498b08 mov rcx,qword ptr [r8] ds:002b:00460020`57004600=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: WmiPrvSE.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002ec0b65 STACK_TEXT: fffff880`03ca0500 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!ExpInterlockedPopEntrySListFault16 FOLLOWUP_IP: nt!ExpInterlockedPopEntrySListFault16+0 fffff800`02ec0b65 498b08 mov rcx,qword ptr [r8] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!ExpInterlockedPopEntrySListFault16+0 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aaa3 STACK_COMMAND: .cxr 0xfffff88003c9fb20 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0 BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0 Followup: MachineOwner ---------
  3. Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\littleraskol\Windows_NT6_BSOD_jcgriff2\121911-21200-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`02e49000 PsLoadedModuleList = 0xfffff800`0308e670 Debug session time: Mon Dec 19 04:29:53.773 2011 (UTC - 7:00) System Uptime: 3 days 9:59:50.319 Loading Kernel Symbols ............................................................... ................................................................ ...................................... Loading User Symbols Loading unloaded module list .......... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff80002ebdb65, fffff8800aab3b20, 0} Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff80002ebdb65, Address of the instruction which caused the bugcheck Arg3: fffff8800aab3b20, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!ExpInterlockedPopEntrySListFault16+0 fffff800`02ebdb65 498b08 mov rcx,qword ptr [r8] CONTEXT: fffff8800aab3b20 -- (.cxr 0xfffff8800aab3b20) rax=00000003b97f0003 rbx=0000000000000008 rcx=fffff880009ea060 rdx=0046002057004601 rsi=0000000000000012 rdi=0000000000000008 rip=fffff80002ebdb65 rsp=fffff8800aab4500 rbp=fffff880009ea060 r8=0046002057004600 r9=fffff80002e49000 r10=fffff880009ea060 r11=0000000000000000 r12=fffff80003050340 r13=0000000000000000 r14=0000000000000002 r15=000000006770534e iopl=0 nv up ei pl nz na po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206 nt!ExpInterlockedPopEntrySListFault16: fffff800`02ebdb65 498b08 mov rcx,qword ptr [r8] ds:002b:00460020`57004600=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: WmiPrvSE.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002ebdb65 STACK_TEXT: fffff880`0aab4500 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!ExpInterlockedPopEntrySListFault16 FOLLOWUP_IP: nt!ExpInterlockedPopEntrySListFault16+0 fffff800`02ebdb65 498b08 mov rcx,qword ptr [r8] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!ExpInterlockedPopEntrySListFault16+0 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aaa3 STACK_COMMAND: .cxr 0xfffff8800aab3b20 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0 BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0 Followup: MachineOwner ---------
All three of your blue screens were basically the same. All pointed to system files, and are thus inconclusive. To rule out system file corruption, run SFC /SCANNOW Command - System File Checker


Quote   Quote: Originally Posted by littleraskol View Post
Driver Verifier returned something interesting. When I restarted, Windows initially failed to start, going to a BSOD I had never seen before: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION with an error code of 0x000000c1. When I next restarted, Windows ran startup recovery and asked me to restore to a restore point. After that, it started normally. For some reason, this BSOD also did not create a minidump.
Can you also please post your most recent dmp files by running through http://www.sevenforums.com/crashes-d...tructions.html again? This will give us an update on anything that has changed with your system (any new application errors, hardware changes, etc.) since the last upload.
My System SpecsSystem Spec
29 Dec 2011   #6

Windows 7 Home Premium 64 bit
 
 

Thanks for the reply, I'll get on that and post back in a bit.

ETA: as info, I have not added any new hardware.
My System SpecsSystem Spec
29 Dec 2011   #7

Windows 7 Home Premium 64 bit
 
 

New BSOD report bundle attached.

I ran the SFC command in verify only mode, it seems to indicate no file system issues:

Quote:
C:\Windows\system32>sfc /verifyonly

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.
This is looking more an more dire. I am really hoping this was just a software issue that a format and reinstall can solve, but if there's no problems with the files... If this is hardware, the fact that it only started a month ago (and months after I built the machine) makes returning the parts a nightmare, because it's possible one of them got damaged instead of simply being flawed from the started. welp
My System SpecsSystem Spec
29 Dec 2011   #8

Windows 7 Home Premium 64 Bit
 
 

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\littleraskol\BSOD\Windows_NT6_BSOD_jcgriff2\122911-15459-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02e11000 PsLoadedModuleList = 0xfffff800`03056670
Debug session time: Thu Dec 29 03:47:13.801 2011 (GMT-7)
System Uptime: 4 days 10:47:18.346
Loading Kernel Symbols
...............................................................
................................................................
...............................
Loading User Symbols
Loading unloaded module list
.................
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002e85b65, fffff88007dd7cd0, 0}

Probably caused by : hidusb.sys ( hidusb!HumGetStringDescriptor+10a )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002e85b65, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88007dd7cd0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
nt!ExpInterlockedPopEntrySListFault16+0
fffff800`02e85b65 498b08          mov     rcx,qword ptr [r8]

CONTEXT:  fffff88007dd7cd0 -- (.cxr 0xfffff88007dd7cd0)
rax=00000003583f0003 rbx=0000000000000001 rcx=fffff80003004d60
rdx=0042034c61004201 rsi=0000000000000012 rdi=0000000000000000
rip=fffff80002e85b65 rsp=fffff88007dd86b0 rbp=fffff80003004d60
 r8=0042034c61004200  r9=fffff80002e11000 r10=fffff80003004d60
r11=fffff88007dd8800 r12=fffff80003018340 r13=0000000000000000
r14=0000000000000002 r15=0000000055646948
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ExpInterlockedPopEntrySListFault16:
fffff800`02e85b65 498b08          mov     rcx,qword ptr [r8] ds:002b:0042034c`61004200=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  mainserv.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff80002fbc1de to fffff80002e85b65

STACK_TEXT:  
fffff880`07dd86b0 fffff800`02fbc1de : fffffa80`095e4558 fffff800`02e92f32 fffffa80`0ed6d8f0 fffff800`02e9f89c : nt!ExpInterlockedPopEntrySListFault16
fffff880`07dd86c0 fffff880`055b3b4e : 00000000`0000000a 00000000`00000001 fffffa80`08ecd0a0 fffff880`055abd2d : nt!ExAllocatePoolWithTag+0xfe
fffff880`07dd87b0 fffff880`055abf2f : fffffa80`00000106 fffffa80`0ed6dc48 fffffa80`0ed6dc00 fffffa80`0ad059b0 : hidusb!HumGetStringDescriptor+0x10a
fffff880`07dd8830 fffff880`055bc02f : fffffa80`0d791301 fffffa80`0ed6dc48 00000000`00000001 fffffa80`0ad05b20 : hidusb!HumInternalIoctl+0x10b
fffff880`07dd88a0 fffff880`055bbdd0 : fffffa80`0ed6dc48 fffff880`055c44a0 fffffa80`0c34ab30 00000000`000b01be : HIDCLASS!HidpGetDeviceString+0x8b
fffff880`07dd88e0 fffff880`055ba8d3 : fffff880`055c5301 fffffa80`0ed6d8f0 fffffa80`0c34ab30 00001f80`000b01be : HIDCLASS!HidpIrpMajorDeviceControl+0xb2c
fffff880`07dd8970 fffff880`0547f83f : 00000000`c00000bb 00000000`c00000bb fffff880`07dd8ca0 fffffa80`0ed6d8f0 : HIDCLASS!HidpMajorHandler+0x1c3
fffff880`07dd89e0 fffff800`031a8a97 : fffffa80`0bf2cf20 fffffa80`0bf2cf20 fffffa80`0ed6dc90 fffffa80`0ed6d8f0 : HidBatt!HidBattIoControl+0x87
fffff880`07dd8a10 fffff800`031a92f6 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x607
fffff880`07dd8b40 fffff800`02e8ced3 : 00000000`73702450 00000000`0122f170 00000000`0122fd20 00000000`7efaa000 : nt!NtDeviceIoControlFile+0x56
fffff880`07dd8bb0 00000000`73702e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0122f0f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x73702e09


FOLLOWUP_IP: 
hidusb!HumGetStringDescriptor+10a
fffff880`055b3b4e 4889842488000000 mov     qword ptr [rsp+88h],rax

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  hidusb!HumGetStringDescriptor+10a

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hidusb

IMAGE_NAME:  hidusb.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce7a665

STACK_COMMAND:  .cxr 0xfffff88007dd7cd0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_hidusb!HumGetStringDescriptor+10a

BUCKET_ID:  X64_0x3B_hidusb!HumGetStringDescriptor+10a

Followup: MachineOwner
---------
The blue screen error blames hidusb.sys, so go through the steps in USB Driver - General Fix for Problems to help resolve the issue.
My System SpecsSystem Spec
29 Dec 2011   #9

Windows 7 Home Premium 64 bit
 
 

That's interesting, I'd have never guessed that. Is this the original 0x0000003b "SYSTEM_SERVICE_EXCEPTION" error or the 0x000000c1 "SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION" error that showed up once? Anyway, I will try that out and see how it goes. Thank you!
My System SpecsSystem Spec
29 Dec 2011   #10

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by littleraskol View Post
That's interesting, I'd have never guessed that. Is this the original 0x0000003b "SYSTEM_SERVICE_EXCEPTION" error or the 0x000000c1 "SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION" error that showed up once? Anyway, I will try that out and see how it goes. Thank you!
This one was from today. I did not see any from Verifier running. More than likely, the blue screen during Verifier was not able to be saved. Often, one has to run Verifier one driver at a time to find the culprit or read it from the bottom of the blue screen while it is up on the screen while verifying multiple drivers.
My System SpecsSystem Spec
Reply

 BSOD occurring at random in ntoskrnl.exe, error code: 0x0000003b




Thread Tools



Similar help and support threads for2: BSOD occurring at random in ntoskrnl.exe, error code: 0x0000003b
Thread Forum
Solved BOSD Random Times/Applications, error 0x0000003B ntoskrnl.exe BSOD Help and Support
ntoskrnl.exe BSOD error 0x0000003b when gaming BSOD Help and Support
Solved Random BSOD error 0x0000003B ntoskrnl.exe BSOD Help and Support
Solved BSOD Error Code 0x0000003B Random Timing BSOD Help and Support
Solved BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc BSOD Help and Support
BSOD(ntoskrnl.exe+70600) error 0x0000003b BSOD Help and Support
Random BSOD when playing games bug check code 0x0000003b BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:55 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33